error code 12 in Device Manager with graphics card intel HD.

I buy a system with the following specifications.

Win 7 ultimate 32 bit
with intel motherboard DH61WW

When I install the drivers for the graphics card, I got error in the management system saying code 12
"This device cannot find enough free resources that it can use. (Code 12)

If you want to use this device, you will need to disable one of the other devices on this system. »

I have the latest version of the driver software


Thank you Sir,

I solve the problem by myself...!
There was a reader of "AMD 3gIO filter" problem is a conflict I do system restore and install the new driver successfully...

Tags: Windows

Similar Questions

  • Equium L40-156: graphics card problem - error code 12 in Device Manager

    People of the night...

    Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

    Tried the drivers that I had with the installer
    Tried the drivers from the toshiba download page
    Tried the drivers on the Microsoft Update site
    Tried the drivers from the website of intel

    All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

    Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
    Display settings do not display a connected device, DXDIAG had no idea either.

    Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

    Any suggestions, greatly appriciated



    I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

    + Error code 12 +.

    + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

    + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +

    Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
    I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
    You can use the Toshiba Recovery CD/DVD of restoration!

    All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

    Check this box and report if the same error is displayed on the laptop with the factory settings!

    Good bye

  • Satellite NB10t-A-101 - problem with graphics card Intel using Win 10

    After I upgraded to Windows 10, The graphics card worked fine, at least 4 months later, I saw that the Intel Graphics tray icon was missing when I went into device manager he had a small exclamation mark by it and said

    Your computer's system firmware does include enough information to properly configure and use this device.
    To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35)

    Then, I looked a little further into the problem and found this:

    Problem code: 00000023
    The problem: the resources for this device in conflict with the MCFG table.

    I have not edited the PC somehow, any solution to this problem
    Specifications of the PC (if needed)

    Model - NB10t-A-101
    Processor - Intel Celeron n 2810 @ 2 GHz
    Graphics card: Intel HD Graphics.
    RAM - 4 GB

    (Another note: I need the last generic graphics driver for Windows 10,)

    If Win10 supports the Intel HD graphics chip, a driver will be available in Windows Update.

    Check if your HD from Intel is compatible:

  • No sound on windows. Error code 10 in Device Manager

    Original title: No Sound Device

    My sound stopped working. Audio device is a High Definition Audio CODEC IDT. I tried all the updates (hardware and software). In the process of troubleshouting with Device Manager, I get an error code 10. I'm just trying to get my sound card to work. How can I make it work again?


    See the following article to resolve this issue.
    No sound in Windows

    Here is an article which related errors Description 10 Code that generates the Device Manager.
    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  • Error code 43 in Device Manager.

    I have a 43 error that keeps appearing and disappearing.  USB devices worked for a day then stopped working since.  It started sometime in March, and now they are not coming back.  The USB mouse lights up as if it was on and lights up when you move like its supposed to do but it still does not work.  The keyboard does nothing.  I am currently using a ps/2 keyboard.  I have a Windows 8 Inspiron 660 computer with a motherboard Asrock z77 pro4 and a gtx 275 graphics card.  Although my windows is not 'true' so to speak I bought it on its Web site.  I have also 2 monitors connected, one to the motherboard the other to the graphics card.  In Device Manager, the "unknown devices" are sometimes there and sometimes not.  So far, I have tried

    1. Uninstall the usb ports controllers.
    2. Download the latest drivers for my device.
    3. Update the computer several times.
    4. Unplug the unit and plug the usb devices.
    5. Plug my camera on other computers and they worked,
    6. Connect the other devices work in my computer that did not work.
    7. Thanks to the Fixit kit which does not work.

    I was wondering if I pay for support and it does not solve my problem I would get a refund or not.  I have also to documents on when usb devices worked.

    When the Board of Directors and the mouse worked it showed in Device Manager but the "unknown devices" is a not disappear, even if the keyboard and mouse were the only things connected.


    I just noticed that my "Standard Enhanced PCI to USB Host Controller" has an error of 45 and he said: it's not connect.  I don't know what this means, but it may be useful.

    -----------------------------------------------Other Information----------------------------------------------------

    It is an error 45 and he says its not connected, it seems important.

    Hello Roger,.

    Thanks for the reply.

    I'm sorry for the late reply.

    I suggest you try the following steps and check if it helps.

    Remove all USB devices connected to the computer.

    b. press Windows + R keys, type regedit into the run window and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    (c) in the navigation pane, search for, and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFC1-08002BE10318}

    d. in the pane of details, right click 'LowerFilters' and then click 'remove '.

    e. click 'Yes' when prompted.

    f. close the registry editor and restart the computer.

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    I hope this helps.

    Thank you

  • Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

    I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
    In the device manager says code 10 DEVICE can NOT START.

    Help, please!

    Thank you!


    If you read here:

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
    Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

    Welcome them

  • CD/DVD drive not working do not error code 41 in Device Manager

    Original title: code41

    I went to the Manager of devices-uninstalled cd & dvd, rebooted, devices are see the watch but always error code41. When I insert a music cd, the Unit looks like it is will start up, then stop? I also tried the Fix - it on the web site, still does not? Any ideas?


    Method 1:

    Try the steps suggested in the given below link and check if this is useful.

    See also:

    Note: In the article below try the manual steps for the removal of the filters and check if that helps.

    Method 2:

    This problem may also occur if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

    If the Troubleshooting Wizard does not resolve the problem, do one of the following:

    ·        If the device was removed, uninstall the driver, connect the device, and then clickScan for the hardware changes to reinstall the driver.

    ·        If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click theDriver tab and then click on update driver to start the theHardware Update Wizard. Follow the instructions to update the driver.

    ·        If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use Add Hardware Wizard. Click Start, and then clickRun. In the Open box, type hdwwiz.cpl.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Re: Satellite A200 - 10 error code in the Device Manager on webcam

    I had some difficulty trying to get my webcam on my laptop working again.
    Tried to install a new update but it would not work because of some error - 10 of the Code.

    I tried to uinstall using camera Toshiba as well and re installed and that would not work due to some files of corona that she did not.

    Please help me really want this camera to start working again!

    Thank you

    Hey Buddy,

    What of your OS (operating system)?
    No info on this subject? ... Why?

    In your case, I'll try this:
    Remove the old webcam driver and reboot the laptop.
    Run CCleaner to clean the registry and Windows
    Stop and try again
    Install the latest driver from the Toshiba page.

  • explanation of error codes generated by Device Manager

    problem with the hardware and the driver msharoknian

    Hi msharoknian,

    Take a look at this link for complete list:

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: | | |

  • Good question about windows 8 dell inspiron 3521 with graphics card intel delay right click.


    I have an operating system running windows 8 pro on dell inspiron 3521. When I bought the camera, the problem was not visible up to 1 year, and then I installed "Tuneup utilities" for a scan and then uninstalled. Since then, I found annoying problem on my pc.

    Relatek HD audio was working fine but then it started showing good results, but the sound from the speaker is not and or if plugged headphones as well. PC not dettect not any problem on the sound while troubleshooting. The sign of the speaker on the status bar when clicked and increases the volume of it increases the volume, but the sound and color do not here as well.
    It does a strange thing when I trouble shoot using the sound properties and click 'TEST' test is fine, but I can't hear any sound good! and again when I click TEST on speaker, it says "this device is used by another application. Please close... "
    However, the sound works fine without any problems for a while when I trouble shoot with 'Find and fix with device' or I restart the pc. But after a while this problem automatically. with this desktop right click question also annoyed me for the compliment can be! :( Help

    TuneUp utilities and similar programs usually don't serve to ruin a Windows Installer do it do more damage than good. Stories like yours are not uncommon with these programs. Back up all your data on an external hard drive. If you did a restore USB with your system can boot from to restore factory settings. If you have not done one, try using backup and restore Dell to make one. TuneUp utilities may have ruined the Dell backup feature and the recovery and partition recovery so I advise to call Dell technical support and request a DVD of resettlement or recovery USB just in case. I prefer the DVD because it can be copied to a USB key and has no preloaded software, allowing a cleaner installation. You can then try to restore the factory settings and if something goes wrong with the restoration use Dell support to clean install.

  • How can I activate my card Miniport Tun Microsoft? Get the error code (10) the device can not be started.

    Microsoft Tun Miniport adapt #2 /.

    Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10).  I need help to activate the network adapter.

    Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport

    Device ID: root | * tunmp \0001
    status 0 x 01802401 has problem
    0x0000000a problem (10)

    Hi GGisin,
    -Did you change on your computer before this problem?

    Follow the steps listed in the article below for the mentioned error code:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    Note: The information provided in this article are applicable to other versions of Windows XP as well.
    Additional reference on:
  • Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

    Original title: WAN miniport driver

    A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I use windows 8 in my sony vaio
    MODEL - SVE15123CNW

    Hi Praveen,

    Perform the steps suggested by Nirmal S from the link below and see if it helps.

    Answer please if you have any questions.

  • My v3 wifi adapter - 112 p does not (broadcom) - code 10 in Device Manager

    does not my wifi adapter of v3 - 112 p - code 10 in Device Manager


    This device cannot start. (Code 10)

    {Operation failed}
    The requested operation failed.

    Can you do a right click on the card in the Device Manager and uninstall the adapter and restart the computer to see if that helps?

    If it doesn't, try to download and install the Win 10 wireless driver

  • Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

    Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

    Hey Rodney,
    To resolve this issue, follow these steps:
    1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
    Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
    3. press y when you are prompted to check the drive the next time the system restarts.
    4. close all applications and restart the computer.
    Note: When you restart, Windows checks the drive for errors, and then Windows starts.
    5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
    For more information, see this article:
    I hope this helps.
    Kind regards
    Answers from Microsoft supports the engineer.
  • I'm trying to update Adobe Photoshop and I get the following error: extensions 6.0.8 Manager updated there wasn't an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Application Manager there was an error installin

    I'm trying to update Adobe Photoshop and I get the following error:

    The extensions 6.0.8 Manager updated there wasn't an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Application Manager there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Photoshop Camera Raw 9.1.1 (CS6) there is an error in the installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Bridge CS6 5.0.2 update there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe InfrastructureCS6 of CSXS there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Photoshop there is an error in the installation of this update. Quit and try again later. Error code: U44M1U5 Adobe Bridge CS6 5.0.2 update there was an error of installation of this update. Quit and try again later. Error code: U44M1U5 Dynamic Link Media Server CS6 1.0.1 update there was an error of installation of this update. Quit and try again later. Error code: U44M1U5

    Any ideas?

    U44... Update error can help

Maybe you are looking for