Error code:-17004, could not load DLL or library

Hi all

I get the following error message:

Error loading step 'x' sequence 'MainSequence' in the file 'y '.  Unable to load DLL or external library C:\bin\driver.dll

Error code:-17004, unable to load DLL or library.

' Source ' THOMAS '.

My main DLL is one written in C in LabWindows.  This DLL calls a second DLL written in Visual C++

I use TestStand 2010 SP1 as well as LabWindows/CVI 2010.  I have Windows XP Professional SP3.

This same sequence, DLL1 and DLL2 worked together in previous versions of TestStand!  All I did was upgrade from Developer Suite 2011... ???

I have reviewed all the messages about this problem and have so far done the following:

1. check the two DLL1 and DLL2 reside in the same directory

2 copied DLL2 in C:\Windows\system32

3 used the Dependency Walker tool to check that there are no other missing DLL

4 uninstalled Explorer 8 and install Explorer 7 because of something I've seen depends on and something that I read while researching this problem.

5. check the search directories in TestStand

I am out of resources, because I can't determine what the problem and any suggestions would be welcome

You have the correct version of the runtime visual C on this machine? If it is a debug version of the dll you need a debug version of the visual C++ runtime. If you have not visual studio is installed it is unlikely to be installed on your machine.

You can open the dll in visual studio and look in the dll resources to see what version of sxs dll it is linked with the manifesto. You must make sure that it exists on your computer. Depends on generally should show a problem if that's the problem, however.

Hope this helps,

-Doug

Tags: NI Software

Similar Questions

  • Error code 39, could not load the driver for my cd/dvd device.

    I tried the advice of troubleshooting, uninstalling and reinstalling, but it does not fix it.  I think that the driver on my computer is corrupted.  I can't get the original driver from the CD provided with the computer... because the CD player does not work... so... can Ow I get the driver to try a new?  And exactly how to load this driver?

    Here are the specs of the drive: TSST corp DVD + RW TS-H653B

    Driver version: 5.1.2523.0

    Please help, trying to install a new printer and cannot do without my CD drive... ack!

    Thank you

    Hi RhonBB,

    You can follow this link & check if the problem persists.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Could not load dll target ("C:\program files\backweb\backweb client\6.1.0.153\program\backweb.dll error code126)

    Original title: error code 126

    Could not load dll target ("C:\program files\backweb\backweb client\6.1.0.153\program\backweb.dll error code126)

    How can I fix it?

    Hello

    1. when exactly you get this error message?
    2. don't you make changes on the computer before this problem?

    Please answer these questions and tell us more about the issue. This could help us help you better.

    Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on start and then click Run.
    2. type msconfig and click OK.
    The System Configuration Utility dialog box appears.
    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

  • I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

    I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

    Hello

    I suggest you to please follow the steps described in the following articles and check if it helps.

    "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

    http://support.Microsoft.com/kb/812467

    How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

    http://support.Microsoft.com/kb/973457

    Let us know if it helps!

  • I can't uninstall the old Java version 6 update 29. I get a "error code 1606: could not locate the directory."

    I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java?  I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability.  I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory.  Help, please!

    original title: uninstall older versions of Java
    Hello
     
    Method 1:
    Check out the link and follow the steps.
     
    After uninstalling Java, how to remove its entry in the windows?
     
    Method 2:
     
    See the article and follow the steps.
     
    Error message when you install a program: "Error 1606. Could not access the network location. "All the users\ directory '
     
     
    Method 3:
    Check out the link and follow the steps.

    Download errors: 1305, 2755, 1606, etc..
    http://www.Java.com/en/download/help/error_installshield.XML
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
  • Creative installation Cloud 42 error code: Installer could not access critical file / folder.

    Creative installation Cloud 42 error code: Installer could not access critical file / folder. I thought that the problem was related to permissions. But after changing the permissions administrator and user always the same error message. How can I fix? Help much appreciated.

    Help for the Download & Install & Setup & Activation

    -Cat http://www.adobe.com/support/download-install/supportinfo/

  • What is going on? Resource not found on the development computer. Error loading VI in lvlib. Load error code 3: could not open the front panel.

    Hello!

    I'm new to libraries of LV and I am compiling my application for the first time with several new lvlib.

    The executable is apparently built without problem, but when I try to run it on the same computer, I get various error messages (4) on the different elements but a single library:

    «LavVIEW: resource not found.»

    "An error occurred loading VI ' LibraryA.lvlib: ItemA.vi '.

    LabVIEW support 3 error code: could not load façade. »

    After that I got the same message for points B, C and D, a final message pops up like this:

    "Missing Subvi LibraryA.lvilib:ItemA.vi in LibraryA.lvilib:CallerX.vi.

    Missing, Subvi LibraryA.lvilib:ItemB.vi in LibraryA.lvilib:CallerX.vi.

    Missing, Subvi LibraryA.lvilib:ItemC.vi in LibraryA.lvilib:CallerX.vi.

    Missing Subvi LibraryA.lvilib:ItemD.vi in LibraryA.lvilib:CallerX.vi. »

    I am not getting any errors for all libraries, so I wonder what is happening.

    So far I have tried:

    -Mass compilation, a few times

    -Check / uncheck 'delete unused library of the project members' and change project after library file removed unused members in the additional Exclusions Page «»

    -Add the screw mentioned in "Still included" in "Source Files".

    When I added the "Always included" screw, I rather got the following (4 times, end to end):

    "The Vi is not executable. The version of LabVIEW full development is necessary to correct the errors. [...]"

    Any other ideas?

    Thank you!

    I have it!

    My problem wasn't a bug compilation of the library at all, but a Scilab Script one.

    The solution can be found here: http://digital.ni.com/public.nsf/allkb/D21F6AC8CFC39E318625756600553B1E

    Thanks for your help, it made me identify!

    Good day!

  • Vista won't go dormant and error related volmgr (could not load the crash dump driver)

    Hi all


    I've been using Vista for a couple of years and for some reason any yesterday he began to refuse to go to sleep.  I did not any changes to the system or ran updates until this happened (I'm not on Sp2, just under the security updates every now and then).  I checked the Device Manager to see if the network card has been to reactivate, but this was not the case; I also disabled the mouse of this awakening, and that did not help either.  I told him to go to sleep, and he wakes just in 1 to 5 seconds.  I checked event viewer and noticed that whenever I put him to sleep, I get volmgr error: "the system could not sucessfully load the crash dump driver.  Going back through the events, this error has not appeared before, so I guess that it is connected to the computer doesn't go to sleep.  Any help would be appreciated, thanks!

    Here are the details of the error:


    -
    -
     
      45
      2
      0
      0 x 80000000000000
     
      152547
      System
      Sebastian-PC
     
     

    -
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C004200000430000C000000000000000000000000000000000
     

     

    Hi Sebas-82,

    I suggest that you update the driver for graphics card on the computer and check if it works.

    How to upgrade the graphics card on the machine driver

    1. click on Start, click Control Panel, and then double-click System.
    2. click the tab hardware , and then click Device Manager.
    NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
    3. click on the graphics cards to develop.
    4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.
    5. click on Update driver software.
    6. follow the Wizard update driver to update the driver graphics cards.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If updating the driver fails, then uninstall and reinstall the latest driver for the video card by downloading from the website of the manufacturer of the system.

    Also see the Microsoft kb article below.
    Windows Server 2008 or Windows Vista Service Pack 1 - systems do not generate a dump file if the system partition is a mirrored volume
    http://support.Microsoft.com/kb/958933

    If the previous step fails, then you need to update the motherboard chipset drivers by contacting the manufacturer of the computer.

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

    Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

    Now, after a few days looking for a response, I decided to ask the guy who made the game.

    The error message also appears when I download just 2 service packs of Microsoft also.
    I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

    Original title: fsx gold edition...

    Try this, it worked for me:

    (1) uninstall normally from the control panel.

    Reinstall 2) in the Windows directory (C: here)

    (3) install SP1, SP2

  • Vista - Error Code: 0X80070B7 (could not install Service Pack 2)

    Cannot install SP2. 0x80070b7 error code. Also can't install the system tool, but no error code.

    Automatic update of Windows attempted to load 4 updates recently, but an error message came up saying that it could not install SP2. The code was 0x80070b7. I tried to install SP1, in the case who had not worked for a long time, but the message is that the 'SP1 Setup is already running. I tried to install the tool of analysis, but all I get is a message saying KB947821 could not be installed. My computer still works until all this happened, and now it crashes after a few minutes of walking. It will be release after 20-30 minutes for a minute or two and then lock up again. Obviously, something happened in automatic installation and now the laptop is somewhere between facilities. I'm away for two weeks and are in desperate need of my computer. What can I do?

    Thank you

    Support FREE from Microsoft for SP2:

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Vista - Error Code: 800F0816 (could not install KB2296011) Hung to configuring updates 3/3

    Laptop from my dad recently started showing "configuration updates 3/3" followed back changes not configured message. It is on a continuous while loop that will sometimes allow windows Vista Home Premium to start. I checked the history of update and the first failure is KB2296011 which shows the error code 800F0816.  Currently, I have his laptop but cannot access the internet because it does not connect to the internet via my network (do not have the knowledge necessary for to be difficulty)

    Can someone help me solve this recurring problem. If necessary I will be able to access the internet on the laptop question but would like to know a solution offline if possibel. I don't want to pay Microsoft Help for the answer. I'm not very literate pc so a simple solution would be better.

    You don't have to pay "Microsoft Help" for a response from the update that you have posted, KB2296011, is a Security update.
    Of MS10-081: vulnerability in the Windows common controls library could allow remote code execution (KB2296011)

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    800F0816 - express package has not been completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).

    For a 'solution offline' you can try to manually download each update to the computer you are currently using and then transfer to the portable touched with a USB key.
    Then see if they install correctly. Given that we do not know all the edits concerned... open Windows Update in Control Panel, and then click View update history link to see updates try to install.
    Note that the KB numbers are updated and post them in this thread or,
    go to the Microsoft Download Center, enter the KB numbers in the field to Search all Download Center , click the magnifying glass to search and download for Vista updates that correspond to the architecture of the system. (The architecture of the system is displayed when you open System in Control Panel and look at the side of System: type.)

    Save updates. When the downloads have finished, close the browser and all other open programs and install them one at a time. Suggest that each time you are prompted to restart.

    You can configure the phone assigned to the clean boot. Then see if the connection is restored, the updates can be downloaded and installed-
    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

    Expert MowGreen Windows IT Pro - consumer safety

  • Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

    Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

    When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
    Tried the uninstall from Device Manager and restart the computer, still the same error.
    Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
    Checked Windows SP1 worked, still the same error.
    He got me completely baffled.
    Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
    I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
    Please help, I'm going crazy on this problem...

    The specifications of my devices are as follows:
    Computer
    Model:
    Alienware M14x
    Type of system:
    64-bit operating system
    Hard drive model:
    Portable Seagate Expansion 1 TB drive

    Hello

    28 error code means that the device was not fully installed.

    Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

    To open the Troubleshoot utility equipment follow the given link:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: You can update the drivers and check out them.

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Additional information.

    Install a USB device:

    http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    Hope this information helps.

  • Vista - Error Code: 80070005 (could not install Windows Defender definitions)

    ·        I got s error code 80070005 when:

    Windows Update does is set to automatic update search and downloaded an update of the normal Windows Defender definitions.

    Downloaded, it would not move.  I regularly got these definitions of Defender updates and installed without problem, since a few years - until Monday July 5, for some reason any.  I'm not aware of any change that I made for all programs, because I downloaded and installed my update of definitions last defender about a week earlier.

    I use a single Windows Vista Ultimate Desktop without networking or wireless involved.

    I saw in a previous question and replyManasa P to Support of Microsoft, June 25 wrote:

    This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

    Method 1: Log in to the computer as an administrator

    1. Firstly please confirm that you have logged on to an account with administrative privileges.
    2. now run Windows Update.

    Method 2:

    If you still experience the problem, reset the Windows Update components and check if you still get this error message.

    Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    This is an update of the HP Monitor driver.  Is "reset" Windows Update components all I have to do as well for my situation, with a problem installing Defender update the file definitions? "  Just using the "Fix it" button, or is there something different about my situation?

    Thank you, Jim North

    Hi Robear,

    Good news: this weekend the "alert" to install the file older definitions that couldn't went away on its own.  Then, this afternoon, the definitions of the latest update file 1.85.1905.0 downloaded and installed without problem.  Wonder what has caused the problem of moose?

    Thanks again, Jim North

  • Error code: 8024200d (could not install KB970430)

    Update KB970430 gives 8024200d error code

    I tried several times to update, but it fails

    Hi bjfrazer1,

    1. are you able to install other updates successfully?

    2. did you of recent changes on the computer?

    3. What is the version of Windows installed on the computer?

    Method 1

    I suggest that you manually download and install the update, check if it works.

    Description of the update that implements extended Protection for authentication in the HTTP (http.sys) protocol stack

    http://support.Microsoft.com/kb/970430

    Method 2

    If fails it to step above then check out the link below and try the steps mentioned.

    Windows Update error 8024200d

    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d

    Note: Link above also applies to Windows vista.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error code 80070490 could not be updated. 11-09 has been updated. I'm trying to update but it fair to say that try again with error code nothing changed on my computer. I'm pretty new to this. can someone help me please

    error code 80070490 cannot install windows update.

    Ken,

    0 X 80070490 - ERROR_NOT_FOUND

    Corrupted system file.  You will need to perform an upgrade on the spot or reinstalling the operating system.

    Ignore the title: Some Windows Vista functions may not work, or Windows Vista may stop respondinghttp://support.microsoft.com/kb/929833

    A repair install is that the usual of SFC/scannow solution does not work.

    You receive an error code "0 x 80070490" when you use Windows Update or Microsoft Update Web sites to install updateshttp://support.microsoft.com/kb/958044

Maybe you are looking for

  • Lack of screen after disassembly of the Satellite X 205 - s9349

    Well heres so what happened. My laptop was running very hot, so we took it apart and cleaned all the dust. Then, we put "artic silver 5" on the CPU and the gpu. When we got it all back together, the monitor had a tinge of purple to it. When we have s

  • Is it possible to schedule automatic defragmentation?

    I want to configure my Windows XP to automatically do a defrag on every two weeks. I tell myself that I have two choices: find some software that will launch the defragment utility supplied with Windows, to find a defragmentation utility that has cal

  • How do I set the date and time for those?

    Windows Vista; all the time that the I shoot my computer automatically go back to the year 2001; so whenever the I put on the computer I need to set up the date and time;  With the help of Windows, after the< is="" an="" error="">, but did not mentio

  • EA6500 connectivity issues

    I have had this router for about 6 months. The first 3 months were no problem as far as the Internet goes. It seems that, after the last update of the firmware, I started having these problems. I don't know if it is a factor or not. I tried to go bac

  • brand/model of WLAN adapter

    I try to find the wifi adapter make and model for my new HP Pavilion 15 t-n200 CTO recently go. I decided to do a new install of Windows 7 x 64 but I forgot to write down the make and model of wlan before I wiped the hard drive. I downloaded and inst