Error code #2000-0142 after the laptop is a Dell fall.

Original title: I have a Dell Inspiron 1545 with Windows 7 x 64 which does not load windows.

No new software or configurations have been added since this problem started about 2 weeks ago.  However, the laptop fell.  I was able to run the system diagnostics by pressing F12 at startup.  All retired except for one hard drive tests (DST short Test), who has found the error #2000-0142.

I know that some forums suggest that the error refers to a bad hard drive or corrupted.  But others have had some success in trying the installation CD/DVD.

Basically, the computer crashes windows tries to load/startup and I get to the blue screen with a dove and the leaves of some green in the background and a mouse cursor that works.

I tried several methods of recovery without success. Whenever I find myself on the same blue screen.  I inserted the DVD FAB with the Windows installation/recovery.  I tried installing but the computer froze in the process.  I'll try the repair option, but the computer is frozen on the System Recovery Options. The menu lists the hard drive, but the compputer seems to be stuck trying to figure the size of the partition with.  Is there a problem if I tried the method of installation first, before you try the repair option?

You will need to replace the hard drive.

Tags: Windows

Similar Questions

  • ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?

    I have a laptop DELL with Windows Vista loaded.

    It tries to load the desktop but keeps running without result green bar

    CHECKDSK is conducted without all the mistakes are found.

    DIAGNOSIS showed the color screen, then the error code 2000-0142

    which seems to be related to the hard drive.

    F2 function key works to change settings

    What should I try to run windows?

    Thank you

    Hello

    It is an error code Dell saying that your drive hard has failed and must be replaced.

    Read this information from the Dell Community.

    http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134

    http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx

    http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx

    For more information about error codes Dell, please ask in the Dell Community Forums.

    http://en.community.Dell.com/support-forums/default.aspx

    See you soon.

  • Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.

    Hello guys

    I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»

    Can someone help please...

    Regarads

    khanisar

    Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.

    Bev.

  • Drive hard error Code 2000 - 0142

    Inspiron 15 (3531, mid-2014)

    I tried boot diagnostic that the result has failed with the error code 2000-142.

    I have used a quick diagnostic race through dell online support site - it shows critical errors found

    for hardware failure then suggested for a replacement.

    Targeted both reading test SMART short self-test is broken.

    We hope to hear from you on your recommendations of experts on hardware issues.

    [Admin NOTE: maintain the label removed in accordance with the TOU strategy]  [Admin NOTE: deleted in accordance with the Express service code TOU strategy]

    Ryan Ibarreta - [Admin Note: personal information]

    Philippines

    Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.

    If the same error is received, the hard drive has failed, then you need to replace it.

    If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.

    Bev.

  • error code: 2000-0142

    System-dell inspiron 3542

    error 2000-0142...

    What should do?

    Help, please...

    Thank you...

    The hard drive has failed.

    If the system is under warranty, contact Dell with the exact error and they will replace the drive.

    If the system is no longer under warranty and you need help to choose a replacement drive and installing it, please post the complete model of the system number (i.e., N5110 Inspiron, XPS L501x, etc.).

  • My computer does not open in normal mode and I get an error message that short DST has failed, which is the error code 2000-0142

    It opens fine in safe mode, I took it back to 10/01/2011 as suggested, and the problem persists.

    On a Dell computer, it indicates a problem with the hard drive.

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=DHS&docid=266787#HDD

    The reader will probably have to be replaced.

  • Exception error of system service after the reset of the HP 2000 laptop to factory settings

    Hi a problem with PC laptop computer hp laptop 2000. Was the laptop of my father, but he did something that he had a friend he guy reboot the system at factory. Then I got it back I applied Att uverse macfee security and now it continues to occur a problem him stops. Say "system service exception. Help please it bought it I can use it for training continues for my care permit. Hellllp please! Oh also something is blocking updates, I noticed it says failed.

    Original title: problem of Windows 8

    Suggest you try first uninstall MacAfee Antivirus software and see if the problem stops. If not, update the system and avoid the installation of MacAfee.

    http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

    How to refresh Windows 8:

    Here's what happens when you refresh your PC:

    · Your files and your personalization settings do not change.

    · Your PC will change back to their default values.

    · Applications on Windows Store will be kept.

    · Applications that you have installed discs or sites Web is removed.

    · A list of removed apps will be saved to your desktop.

    These steps will take you through refreshing your PC:

    · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

    · Click settings


    · Click change PC settings


    · Click general in the left column

    · Under refresh your PC without affecting your files, click Start


    Then follow the instructions that will be provided on-screen to cool your PC.

    You can use the built in Antivirus which comes with Windows 8:

    http://techingiteasy.WordPress.com/2013/05/29/how-to-turn-on-Windows-Defender/

  • Error code: 2000-0146 (laptop hung on "Installation screen Windows updates")

    OK, so I have every time I turn on my computer dell laptop (I have windows vista) it acts like it is to install the updates of windows. He said same facility 3/3 even though the completion bar shows 0%. She does this, is like its about to restart then passes to the installation screen.  I ran the diagnostic test and the error code 2000-0146 came. I'm not sure if this is useful, but if anyone has a solution please help! Thank you

    Oh and I tried to restore the option and he did nothing.

    Hi cgardne5,
     
    1. How did you restore the computer?
     
    Try these steps and check the result.
    Step 1: The repair of the boot with Vista DVD
    a. Insert the Windows DVD.
    b. restart your computer.
    c. let the computer restart (boot) from the DVD.
    d. If you are prompted, press a key to continue.
    e. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
    f. do not click install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
    g. make sure that the appropriate operating system is selected, and then click Next.
    h. After you click Next, the System Recovery Options menu appears.
    i. click on startup repair. Once the Startup Repair tool is completed, click Finish to restart the computer.
    j. remove the DVD and restart the computer to see if the system boots fine.
     
    Step 2: If you do not have the Vista DVD, start the computer in safe mode and restore the computer
    See Start your computer in safe mode
    See System Restore
    NOTE: You can also choose the system restore on the system recovery options.
     
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Received error BSOD, ran Diagnostics, got the error code 2000-0146, tried to boot from different HARD drive, got the same stop error message

    So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?

    No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.

    Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately.  Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad.  Replace it.

  • I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?

    I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?

    U44M1I210.jpg

    U44M1I210 - creative cloud help / error U44M1I210 | Install the updates:

    http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

  • Error code 213,11 after you install the trial version of Photoshop Elements

    I get error Code 213,11 after installing the version track of Photoshop Elements.  What to do or how can I remedy.

    http://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

  • Vista - Error Code: 80240016 (cannot install the update for my mouse)

    error code 80240016: updated of the mouse, I can't seem to install correctly under windows vista, HP dv9727cl laptop.
    Help please. Thank you.

    Synaptics PS/2 PORTtouchpad

    0 X 80240016 WU_E_INSTALL_NOT_ALLOWED

    Tried to install so that another installation is in progress or the system has been

    in the meantime a mandatory reboot.

    and/or

    http://support.Microsoft.com/kb/957307

    Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

    Windows Vista and Windows Server 2008

    Follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start, type command prompt, in the list of results, right-clickguest, and then clickrun as administrator.
      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    TaurArian [MVP] 2005-2010 - Update Services

  • Error code 2000-0146 and 0F00:065 D and B 0F00:137

    I have a Dell Studio 1735 laptop.  Today it froze on me.  I could only make a hard stop.  I tried to log in again and got on the desktop with icons, but couldn't go further.  Don't have hard stop yet and I tried to go back to the top.  I made a kind of diagnostic tests and received the error code 2000-0146 following.  Also received the 0F00:065 D error reading DISK_0-self-test and 0F00:137 B DVDRW_1-disk is missing Virgin insert the data disc (example of the RCD).  I don't know what all these means.  Can someone direct me if it can be repaired and how I can fix it.  Or do I need a new hard drive.  Your help is greatly appreciated.  I use another laptop to write this message.

    The first two messages mean that the hard drive has failed. The third says there is no disc in the DVD drive, so it could not be tested.

  • error code 2000-0123

    my friend has an inspiron she bought there is display the following error a year and a half

    Info: the configuration for an item in the object is invalid in the boot configuration data store.

    Hi Richard,

    1. are you able to boot into normal mode after receiving the error message?

    2. when the problem started?

    3. did you of recent changes on the system?

    You can consult the following link of Dell support for the difficulty with the error code: 2000-0123 and checkif it helps.

    Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

    Hope this information is useful.

  • Error code 2000-0145 on SSD

    I have a brand new DELL Optiplex 9010 AIO and had problems with the SSD (Adata 512 GB).
     
    The problem started with a blue screen of death (BSOD) in Windows 7. After that each new start results in a BSOD. I tried with a new installation, but it also results in a BSOD when installing. I've upgraded to the latest version of the bios A09. The hard drive Diagnostics returns the error code 2000-0145. Try the hard drive in the results on another computer in the same code error when you run the diagnostic tests. Execution of diagnosis with a new hard drive in the computer works well, but when you pass on the original SSD drive the same error recurs.
     
    What means error code 2000-0146 means? Any ideas?
     
    Thanks in advance,
     
    Bug

    2000-0145 has to do with a rotation test.  Dell actually had a stroke of genius to design a diagnosis that has identified problems hard spin-up and test the integrity of a player.  An SSD does not have an engine and cannot return a response appropriate for this part of the test, immediately throws an error.  It is not a standard for one SSD to answer with a bypass for a test like this, since it is an exclusive test.  Some SSD cannot report this error, while other models will be.

    I had to do a lot of digging for it and tried several SSD to see how this error code is displayed.  Again, he would have them all, but he has been consistent among all readers of specific models.  Was a huge headache 2 months & nightmare for me.  SSD so now I'll try other software, or other system to check the integrity of an SSD before calling the bad disk.  A unique model of SSD, this has produced on several readers was the OCZ Vertex SATA III 4.  Fact on all sizes we tested: 128, 256, 512.  Down them on a version customized with various diagnostic tools: discs had no problem.  Many are still in production several months after running the tests.

Maybe you are looking for

  • Satellite Pro 6100 turns off when I connect the power adapter

    Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it selfAny ideas would be appreciated see you soon

  • Camileo H20 - Firmware issues

    When I bought the H20, I thought it was great.It's great, but there are a few negatives. 1. poor quality in low light, maybe they should investigate this thing.2. If you set the stabilization on the menu and you turn off your device, you need to sign

  • HP ENVY 17-j067ez: Nvidia gt 740 m replacement

    Is it possible to replace the nvidia gt 740 m with another graphics card?

  • The RPC server is unavailable. How can I fix it?

    I have Windows XP SP3 and I try to install a Dell 964 all-in-one printer and every time it almost finished installing it stops and I get a message that says the server RPC is unavailable. How can I fix it? I don't know I asked this question in the ri

  • Missing items on a toolbar

    I want to create a contact group in Windows Mail. Help instructions say «In the toolbar, click New Contact Group...» ». My toolbar plans to organize, views and Burn and new Contact Group does not appear under any of them. How can I add this in the to