Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.
Hello guys
I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»
Can someone help please...
Regarads
khanisar
Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.
Bev.
Tags: Dell Drives
Similar Questions
-
Drive hard error Code 2000 - 0142
Inspiron 15 (3531, mid-2014)
I tried boot diagnostic that the result has failed with the error code 2000-142.
I have used a quick diagnostic race through dell online support site - it shows critical errors found
for hardware failure then suggested for a replacement.
Targeted both reading test SMART short self-test is broken.
We hope to hear from you on your recommendations of experts on hardware issues.
[Admin NOTE: maintain the label removed in accordance with the TOU strategy] [Admin NOTE: deleted in accordance with the Express service code TOU strategy]
Ryan Ibarreta - [Admin Note: personal information]
Philippines
Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.
If the same error is received, the hard drive has failed, then you need to replace it.
If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.
Bev.
-
ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?
I have a laptop DELL with Windows Vista loaded.
It tries to load the desktop but keeps running without result green bar
CHECKDSK is conducted without all the mistakes are found.
DIAGNOSIS showed the color screen, then the error code 2000-0142
which seems to be related to the hard drive.
F2 function key works to change settings
What should I try to run windows?
Thank you
Hello
It is an error code Dell saying that your drive hard has failed and must be replaced.
Read this information from the Dell Community.
http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134
http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx
http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx
For more information about error codes Dell, please ask in the Dell Community Forums.
http://en.community.Dell.com/support-forums/default.aspx
See you soon.
-
Error code #2000-0142 after the laptop is a Dell fall.
Original title: I have a Dell Inspiron 1545 with Windows 7 x 64 which does not load windows.
No new software or configurations have been added since this problem started about 2 weeks ago. However, the laptop fell. I was able to run the system diagnostics by pressing F12 at startup. All retired except for one hard drive tests (DST short Test), who has found the error #2000-0142.
I know that some forums suggest that the error refers to a bad hard drive or corrupted. But others have had some success in trying the installation CD/DVD.
Basically, the computer crashes windows tries to load/startup and I get to the blue screen with a dove and the leaves of some green in the background and a mouse cursor that works.
I tried several methods of recovery without success. Whenever I find myself on the same blue screen. I inserted the DVD FAB with the Windows installation/recovery. I tried installing but the computer froze in the process. I'll try the repair option, but the computer is frozen on the System Recovery Options. The menu lists the hard drive, but the compputer seems to be stuck trying to figure the size of the partition with. Is there a problem if I tried the method of installation first, before you try the repair option?
You will need to replace the hard drive.
-
System-dell inspiron 3542
error 2000-0142...
What should do?
Help, please...
Thank you...
The hard drive has failed.
If the system is under warranty, contact Dell with the exact error and they will replace the drive.
If the system is no longer under warranty and you need help to choose a replacement drive and installing it, please post the complete model of the system number (i.e., N5110 Inspiron, XPS L501x, etc.).
-
Error code 2000-0123 Msg: memory - integrity Test failed
I have a DELL XPS9100
[Admin note: personal information]
[Admin note: personal information]
Maintain the label [Admin NOTE: maintain the label removed in accordance with the TOU strategy]
I also ran SEVERAL other tests - including Windows 7 memory test - it past
Test of Stress System (manual)
everything happened, but...
Advanced Pattern testing Test started 17/06/2016-21:15:17 Error message: The written model (5555555555555555) did not match the model read (5555555755555555) the physical address (000000025F55B088). In contrast to the model: 0000000200000000. 17/06/2016-21:15:51 Completion test: Failed (error code: WME22-0V0) 17/06/2016-21:16:05 file:///C:/users/CC/desktop/test%20Event%20Logs%20-%20system%20Stress%20Test.html
teenscrapbookHow to isolate tests of simple modules; knowing which module I test so that I know if I need to replace it
teenscrapbook
If you have two or more modules of memory installed, remove, reinstall one module, and then restart the computer and run the test, test messages no error, reinstall an additional module and repeat the test execution, if the test messages no error, repeat this procedure on all other modules.
Studio XPS 9100 service manual is HERE:
Bev.
-
It opens fine in safe mode, I took it back to 10/01/2011 as suggested, and the problem persists.
On a Dell computer, it indicates a problem with the hard drive.
The reader will probably have to be replaced.
-
Error code 2000-0146 and 0F00:065 D and B 0F00:137
I have a Dell Studio 1735 laptop. Today it froze on me. I could only make a hard stop. I tried to log in again and got on the desktop with icons, but couldn't go further. Don't have hard stop yet and I tried to go back to the top. I made a kind of diagnostic tests and received the error code 2000-0146 following. Also received the 0F00:065 D error reading DISK_0-self-test and 0F00:137 B DVDRW_1-disk is missing Virgin insert the data disc (example of the RCD). I don't know what all these means. Can someone direct me if it can be repaired and how I can fix it. Or do I need a new hard drive. Your help is greatly appreciated. I use another laptop to write this message.
The first two messages mean that the hard drive has failed. The third says there is no disc in the DVD drive, so it could not be tested.
-
Error code: 2000-0146 (laptop hung on "Installation screen Windows updates")
OK, so I have every time I turn on my computer dell laptop (I have windows vista) it acts like it is to install the updates of windows. He said same facility 3/3 even though the completion bar shows 0%. She does this, is like its about to restart then passes to the installation screen. I ran the diagnostic test and the error code 2000-0146 came. I'm not sure if this is useful, but if anyone has a solution please help! Thank you
Oh and I tried to restore the option and he did nothing.
Hi cgardne5,1. How did you restore the computer?Try these steps and check the result.
Step 1: The repair of the boot with Vista DVD
a. Insert the Windows DVD.
b. restart your computer.
c. let the computer restart (boot) from the DVD.
d. If you are prompted, press a key to continue.
e. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
f. do not click install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
g. make sure that the appropriate operating system is selected, and then click Next.
h. After you click Next, the System Recovery Options menu appears.
i. click on startup repair. Once the Startup Repair tool is completed, click Finish to restart the computer.
j. remove the DVD and restart the computer to see if the system boots fine.Step 2: If you do not have the Vista DVD, start the computer in safe mode and restore the computer
See Start your computer in safe mode
See System RestoreNOTE: You can also choose the system restore on the system recovery options.Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?
No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.
Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately. Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad. Replace it.
-
I have a brand new DELL Optiplex 9010 AIO and had problems with the SSD (Adata 512 GB).The problem started with a blue screen of death (BSOD) in Windows 7. After that each new start results in a BSOD. I tried with a new installation, but it also results in a BSOD when installing. I've upgraded to the latest version of the bios A09. The hard drive Diagnostics returns the error code 2000-0145. Try the hard drive in the results on another computer in the same code error when you run the diagnostic tests. Execution of diagnosis with a new hard drive in the computer works well, but when you pass on the original SSD drive the same error recurs.What means error code 2000-0146 means? Any ideas?Thanks in advance,Bug
2000-0145 has to do with a rotation test. Dell actually had a stroke of genius to design a diagnosis that has identified problems hard spin-up and test the integrity of a player. An SSD does not have an engine and cannot return a response appropriate for this part of the test, immediately throws an error. It is not a standard for one SSD to answer with a bypass for a test like this, since it is an exclusive test. Some SSD cannot report this error, while other models will be.
I had to do a lot of digging for it and tried several SSD to see how this error code is displayed. Again, he would have them all, but he has been consistent among all readers of specific models. Was a huge headache 2 months & nightmare for me. SSD so now I'll try other software, or other system to check the integrity of an SSD before calling the bad disk. A unique model of SSD, this has produced on several readers was the OCZ Vertex SATA III 4. Fact on all sizes we tested: 128, 256, 512. Down them on a version customized with various diagnostic tools: discs had no problem. Many are still in production several months after running the tests.
-
Diagnostic error code 2000-0123
Unable to connect and then when I ran before initialization system assesment 4510 build got error code 2000-0123. How to solve?
Hello
· What version of the operating system is installed on the computer?
· What happens when you open a session?
· When the issue started?
If you are using a Dell computer, then check out the following link for the difficulty with the error code: 2000-0123.
-
Hello
I get the error code 2000-0146 found no operating system, I'm on Windows Vista on a Dell inspiron 1545.
Tried to boot from the CD I can do a disk check but it go than even if loading step and then the green light flowing (as knight rider because..... kit) while he just sits on a gray screen... Any ideas anyone... youn think it's disk hard totally kaput, or maybe something else... I read on the site that someone changed its ram as 1 was defective and it worked.
Thanks in advance
Chris.
Saving your files:
You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.
@@@@@@@@@@@@@@@@@@@@
This program may also interest you.
"TestDisk, data recovery.
http://www.CGSecurity.org/wiki/TestDisk
TestDisk can run under
- BACK (either real or Windows 9 x box BACK),
- Windows (NT4, 2000, XP, 2003, Vista, 2008, Windows 7 (x 86 & x 64) Windows, 10)
@@@@@@@@@@@@@@@@@@@@
Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.
"How to use Knoppix.
http://Lifehacker.com/192982/geek-to-live--rescue-files-with-a-boot-CD
@@@@@@@@@@@@@@@@@@@@
"Recover files from Windows using Puppy Linux disks"
https://www.WinHelp.us/recover-files-using-Puppy-Linux.html
See you soon.
-
my friend has an inspiron she bought there is display the following error a year and a half
Info: the configuration for an item in the object is invalid in the boot configuration data store.
Hi Richard,
1. are you able to boot into normal mode after receiving the error message?
2. when the problem started?
3. did you of recent changes on the system?
You can consult the following link of Dell support for the difficulty with the error code: 2000-0123 and checkif it helps.
Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers
Hope this information is useful.
-
I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks. Can I fix? Joe
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to start the computer in safe mode and check if you can start the computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
Try to perform the verification and startup repair if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsIt will be useful.
Maybe you are looking for
-
How migrations (El Capitan) not come to the photo library?
Hello I want to use the Migration Wizard to move my user account for my MacMini BUT put the photo library on a separate hard disk from the system drive. My MacMini has two internal drives, the library is huge. The MacBook (early 2008 - running Snow L
-
The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report. Event ID: 37Source: Kernel-processor-PowerTask category: 7 -What it means and
-
Can I make a dvd of my video email I received?
In my email I received is a video that I opened and played. Now, I want to copy it to a dvd on my desk. Is this possible?
-
HelloI have a requirement where the user wants to see purchase order, billing and delivery details. Order here is my main table linked to the customer, employee, practices and Services. I'm not sure in. link and invoice and receipt what direction I h
-
PDF Edition: How to keep the dimensions of the page
HelloI have Photoshop CS6.I have a pdf file created elsewhere that are labels to print on labels which is 3 columns of labels.I want to edit in Photoshop because my label stock starting to label #4 (I already used the first 3), so I'm going to empty