Error code 31 connection Windows Phone 720 to Satellite C850-B252

Similar Questions

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Error Code BC2 when Windows Update links intall Windows Live ID

  I get an error code BC2 whenever Windows Update tries to install Windows Live ID

  Hello

  ·         Are you able to install any other Windows update?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  0x00000BC2 error means Error_Success_Reboot_Required. This means that you must restart the computer. If you have already connected to a live application, you can restart the computer and check if the problem occurs.

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  For your reference if you have any particular Windows installation updated question. You can follow the steps in the link:

  http://support.Microsoft.com/kb/822798

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• get error code 80072efe when windows tries to update

  I keep gettig error code 80072efe when windows tries to update can't seem to know what means this code anyone can help

  Hello

  When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive this error code.

  I suggest that you follow these steps/methods of the article below and check if the problem persists.

  http://support.Microsoft.com/kb/836941

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42 _

  I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42

  Do a system restore:
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Try to repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Error code while upgrading windows... 0x800706BA

  Error code while upgrading windows... 0x800706BA

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/940520	Windows Vista
  http://support.Microsoft.com/kb/939159	Windows Vista

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Error Code C800044E for Windows updates.

  I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.

  Hello

  1. all the troubleshooting steps have followed so far?

  2. the updates could not be installed?

  3. what fixit did you run?

  4 have have there been recent changes made on the computer before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: Put the computer in a clean boot state and try to install the updates.

  http://support.Microsoft.com/kb/929135

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Try to download the update and install.

  Download Center.

  http://www.Microsoft.com/download/en/default.aspx

  Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3: How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Then try to reinstall updates.

  I hope the information is useful!

• How can I fix an error code 8024001 on windows 7

  How can I fix an error code 8024001 on windows 7

  Hello Ian,

  Windows 7 8024001 error code occurs because the Windows Update Agent is to update automatically.

  The steps below to solve your problem, try:

  1. run the Windows Update utility.

  2 control upgrade of Windows.

  • Research on Control Panel on the search bar on your PC.
  • Click all items in Control Panel.
  • Go to Windows Update.
  • Choose the option Check for Updates .
  • Click view available updates.
  • Find the update for the Windows Update Agent and only install the update.
  • If the installation is successful, proceed with the installation of other updates.

  Or try to download Windows Update at this link.

  3 Rename the file cache.

  • Type CMD in the search bar of you PC, right-click on it and select run as administrator .
  • Type the following command and press enter after each line:
    • net stop wuauserv
    • Ren %systemroot%\SoftwareDistribution SoftwareDistribution.OLD
    • net start wuauserv

  Thank you.

• Error code 31 with Windows 8.1

  Get an error code 31.  Windows 8.1.  Installed a security software update version and now can't access wireless network.  Having run all troubleshooting patches but the adapter from network.  Can you help me?

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e972-e325-11ce-bfc1-08002be10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

• Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  Hi my friend has a Samsung ativ 700 t pro (xe700T1C)

  An update came on his computer to upgrade to 8.1 windows and she accepted the update.

  When the computer has been restarted, an come blue screen error message (error Code: 0xc0000034 in Windows 8 - Boot Configuration data file necessary missing information).

  can help you with a solution?

  I have the same tablet, but I'm still on windows 8.

  see you soon

  Hello

  There is a link available now where you can upload an image from 8.1 to win without a key needed to download... You can save an ISO, create a Flash drive or burn a DVD...

  At least I save the ISO and create a flash...

  The only problem I know is you need to do this on a Win 7 machine or higher and the same 32 or 64-bit machine you make it for...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Error code 80070490 searching Windows updates

  original title: Code error 80070490

  Hi all

  I have this Windows Update icon in my tray on the right saying I need to update my computer, which is good, but every time I have try I get

  "Windows could not search for new updates"

  "Error Found."

  "Code 80070490 - updated window has met an unknown error"

  So I do not use Windows Live One Care, I use AVG Virus Protection, and it is up to date!

  Help, please!

  Hi ONTLLs,

  The error you receive occurs if there is corruption in the manifest of component maintenance base.  The only way to fix this is to do a "repair" of Windows Vista installation.

  http://support.Microsoft.com/kb/958044/en-us
  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80070002 in Windows 7 updates

  K I install the Win 7 updates optional - ex language packs, but they all fail and come up with the "error Code 80070002.

  I deleted temporary files in "Windows - C:\Windows\SoftwareDistribution - downloads & DataStore, some files in the data store could not be removed (DataStore.edb & record logs).»

  What can I do to solve this problem, because it leads me into the wall!

  Specifically , that "temporary files in Windows - Software Distribution" are you referring to?

  80070002 ERROR_FILE_NOT_FOUND
  The system cannot find the specified file.

  Since we do not know what has been removed from C:\Windows\SoftwareDistribution, suggest first reset you update components by running the Fixit here: How to reset the Windows Update components?
  The cleaner method is to download and save the Fixit.
  Then Configure the system for a clean boot .

  Make sure that the native Windows 7 firewall is enabled because the system must be connected to the internet when the Fixit is run.
  Once the system has been started in the pure State, run the saved Fixit, MicrosoftFixit50202.msi and choose aggressive mode. The Fixit will clean the subfolder of Software Distribution, among other operations.
  And the latest version of Windows Update is also installed.
  When the Fixit is complete, restart the system , if you are invited to or not.

  See if the system is able to update now. IF it is possible, then cancel the clean boot procedure and see if it can still be updated.

  If the same error occurs, download, Save , and then run
  Update system (or CheckSUR) analysis tool while remaining in the clean boot state.

  MowGreen Services consumer safety update