Error Code 37 persistent on the NVIDIA GTX560 video card

Hello, I had problems to make windows to initialize the driver for my device. I open the Device Manager, right click on a piece of hardware called "NVIDIA GeForce GTX 560' and go to 'Properties' because it has a yellow flag/warning symbol next to it and the status is: 'Windows cannot initialize the device of this material driver." (Code 37) »

I googled and tried the solutions in vain, so I write here after here did not work.

If I can't uninstall the driver, recognize the hardware and install the driver NVIDIA

I can't uninstall the driver, install the NVIDIA driver and recognize the hardware

What can I do?

Thank you

Haydn

Hello Haydn,

Thanks for sharing this information with us.

I you suggest completely eliminating your computer first NVIDIA drivers and then try to reinstall them from the link provided in the previous post.

You can check the link below to uninstall the NVIDIA display drivers.

How can I uninstall my NVIDIA display drivers?

 

Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

Tags: Windows

Similar Questions

  • In Safari, I get the error code BSO D 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

    In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

    You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?

  • Error code Win32 returned by the print processor: 2147500037. Unspecified error

    I see that this error code has been resolved.   I have a few questions on this topic tho.  Loop here, is where the fun begins.  If i see this exact problem in my hosted cloud envorioment.  The printers are installed locally and are drawn on the network when the user logs in the hosted environment. The user connecting to a full desktop, which is a Windows 2008 R2 server server.  They only receive this problem when printing via the cloud. that uses the same printer drivers installed on the local PC.  On-site printing has the success rate of 100%.

    Here are the mistakes I see:

    Https://rem.exactbid.com/ServiceRequest/SRFsmart/srprintable.as, belonged to craig_REM, document failed to print on printer HP LaserJet P2050 Series PCL6 (from CRAIG) in session 18. Try printing the document again, or restart the print spooler.

    Data type: NT EMF 1,008. Spool file size in bytes: 589824. Number of bytes printed: 540384. Total number of pages in the document: 2. number of pages printed: 0. Client computer: \\VS-XA35. Error code Win32 returned by the print processor: 2147500037. Unspecified error

    Where I am confused, is that I have no driver installed on the server.  they are all drawn in front of the user login local machine solange.  With printing works fine locally.  Uninstalling the drivers will make them any good?  or where should I be looking next?

    Hello

    Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Serverforum.

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • Windows 7 - error Code: 646 (cannot install the Office updates)

    A security update for Microsoft Office InfoPath 2007, Powerpoint 2007 and 2007 Office system. Can not update.

    lokz,

    A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

    Please let us know if that helps.

  • Vista - Error Code: 80240016 (cannot install the update for my mouse)

    error code 80240016: updated of the mouse, I can't seem to install correctly under windows vista, HP dv9727cl laptop.
    Help please. Thank you.

    Synaptics PS/2 PORTtouchpad

    0 X 80240016 WU_E_INSTALL_NOT_ALLOWED

    Tried to install so that another installation is in progress or the system has been

    in the meantime a mandatory reboot.

    and/or

    http://support.Microsoft.com/kb/957307

    Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

    Windows Vista and Windows Server 2008

    Follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start, type command prompt, in the list of results, right-clickguest, and then clickrun as administrator.
      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    TaurArian [MVP] 2005-2010 - Update Services

  • XP Pro printing error "client machine: \\TOOLSHED.» Error code Win32 returned by the print processor: 53 (0x35). "

    I have two PCs connected to a "2wire gateway" I got ATT.  I can read and write files to write to the network, but I can't print from the remote computer or client.

    Hi KennethBurns,
     
    -Are you connected to any network domain? If so, contact the system administrator to solve this problem.
     
    Here's a similar post on this issue. Follow the suggestion given by "Afzal Taher - Support Engineer" to solve this problem:
     
     
    Note: The suggestion given in the link is applicable for the Windows XP operating system.
  • error code 39 cannot load the device driver, cannot load microsoft kernel drm adio Descrambler

    I have no sound, no audio output device installed is the message on the speaker icon.
    Open the Device Manager, I get the error code as indicated in the title. My audio is Realtek ALC888 HD audio

    Dear anyone, I had the same problem. One day, my sound card / audio just stopped. X red on the sound icon. My CD/DVD worked fine but no sound. I uninstalled the sound card, updated drivers... everything I could find... nothing worked. I run only Vista 32 bit with a Realtek AC 97 integrated sound. Looked on the forums and read and I tried for weeks hoping to not have to reformat. Finally, I got in the registry and lucky. Here's what I did: Device Manager: uninstalled all the sound stuff. I kept getting this: Microsoft Kernel DRM Audio Descramber Microsoft Streaming Clock Proxy Microsoft responsible for quality Proxy Microsoft Service Proxy Microsoft Tee/receiver-to-Sink Converter Realteck AC 97 I uninstalled all that sort of thing. Then to regedit and see below Regedit navigate to: HKeyLocalMachine\System\CurrentControlSet\Control\Class {4D36E96C-E325-11CE-BFC1-08002BE10318} ON RITE PANE... I deleted: for FILTERS LOW Dword value (Mine was something that read like LVUSB or some such), I restarted and did not leave Windows Installer automatically... don't leave... it will give you everything _ mentioned above. I reinstalled my sound of a pack of Realtek for Vista. Lo and behold... sound is back. Vista still hate the pilot but did before cuz Vista sucks... but it works like any other so... screw it! I am happy. Hope this works for you. chatilingus

  • I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

    I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

    1. Windows Mail.  But he argued that email account for more than a year without problem.

    2 here is the full error message:

    "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

    ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

    I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

    And I'm waiting for 60 seconds, several times and it does not send

    It was 1 year there, not more. Not sure when it started.
    Read this article from Microsoft Help Support &:

    http://support.Microsoft.com/default.aspx/KB/926374

    t-4-2

  • Error code: 0 x 80070035 the network path was not found.

    Hi all

    I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
    Windows cannot access \\hyd02
    Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
    Error code: 0 x 80070035 the network path was not found.

    I did the settings below:
    (1) file and printer sharing are enabled in both systems.
    (2) firewall is disabled in the systems.
    (3) in the center of security and network, the network is private.
    and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
    Off, media sharing turned OFF.
    (4) the name of the task force in both the system is the same.
    Can someone help me solve this error...
    Thank you
    Sylvie G

    Hi Sylvie G

    Thanks for posting on Microsoft Answers.

    Are the same username and password on both systems?
    What is the share name you are trying to do on the XP machine?
    Let's say that the share name is music, you would get to it by typing \\hyd02\music

    Can you do a Test PING since the Vista PC on the XP PC?
    Go to a command prompt and type ping followed by the IP address of the computer XP

    Please post back the results... Thank you Ken
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error code 525 appeared during the installation of windows update

    error code 525 appeared during the installation of windows update.

    I m using windows vista 32 bit

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

    or repost in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

    Original title:

    I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

    Hi Comicsancturn,

    Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

    Let us know if that helps.

  • I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

    I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

    For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

    Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

    So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

    So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

  • Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

    I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

    I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

    I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

    The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

    I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

    The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

    SOLUTION

    It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

    There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

    (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

    (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

    If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

    The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

    That's all.

  • the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

    See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

    Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

  • R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

    I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

    "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

    LOG FILE:

    _____________________________________________________________________________________________________________________________

    Step 0-8

    Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

    Step 4 of 8: UNIX making pretreatment

    Running: chmod 777/db/oracle/OraInventory r

    chmod-r 777/db/oracle/OraInventory succeeded

    Step 4 of 8

    Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

    PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

    runProcess_1

    StatusString installation of Applications Technology Stack

    Copy the temp area models

    Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

    One-time fixes copy to temp area

    Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

    / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

    Installation of WebLogic Server.

    With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

    WebLogic Server successfully installed

    Web Tier utility installation.

    With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

    Level successfully installed Web utilities

    Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

    EBS registered successfully

    Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

    patching

    / Home/appltest/Bea/beahomelist renamed successfully.

    Application of ad hoc patches

    With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

    Fatal error: T2K install Service

    oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

    at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

    at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

    at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

    at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

    at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

    at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

    at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

    at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

    at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

    Can not install the unique patches

    RW-50010: error:-script returned an error: 1

    RW-50004: Error Code when you run the external process.  Check the log file for more details.


    It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.


    Concerning

    KasunA

    Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

Maybe you are looking for