Error code 643

Similar Questions

• Error code 643 update (Microsoft Silverlight KB979202)

  Update for Microsoft Silverlight (KB979202) fails with the error code 643; several test update.

  You can...

  1 post in this forum instead: http://forums.silverlight.net/forums/13.aspx

  2 'hide' the update; or...

  3 uninstall Silverlight, reboot, and then install the current version via this page: http://www.microsoft.com/silverlight/ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code: 643 (cannot install KB982670)

  This article does not solve the problem: http://support.microsoft.com/kb/KB976982

  The cleanup tool says that it succeeded and the. NET Framework 3.5 SP1has been installed properly.

  However, it fails with the error code 1310 to step to install the downloaded Update:

  .NET framework 1.1

  I still cannot install KB982670 without getting the error Code 643

  Thank you

  Hi outpaddling,
   
  Have you done SFC scan as suggested earlier?
   
  If you have done SFC scan and yet the problem persists, follow these steps:
   
  Create a system restore Point manually, in case a problem occurs during the execution of these steps, you can always perform aSystem Restore until you created last.
   
  You can access the link below to uninstall all versions of the .NET Framework on the computer and then reinstall all the versions of the .NET Framework on the computer.
   
  http://support.Microsoft.com/kb/923100
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Vista - Error Codes: 643 and 646 (cannot install updates)

  A few months ago, I started getting a message when I tried to stop that I had to install 3 updates first.  The problem is installation has failed each time and the message "install 3 downloads" has been causing a delay important whenever I stopped while he goes through the motions of installing the updates.  But they do not have to install each time (according to the update on the computer folder.  I tried all the patches 'easy' and reluctant to mess with the patch that says am ' attention otherwise you will really cause a problem.  How can I solve this problem?

  Error code 643
  http://support.Microsoft.com/kb/923100/en-us

  Error code 646
  http://support.Microsoft.com/kb/2258121

  If the above doesn't work no help, please repost in Windows Update section:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error code: 643 installing MSXML 4.0 (KB954430 & KB973688)

  Original title: Error Code: 643 __Windows update: cannot load MSXML 4.0 updates (KB954430 & KB973688) high priority. Updates.__O.S: Windows 7 Home premium 64-bit__Need Solution...

  Each time repeatedly tried to install MSXML 4.0 (KB954430 & KB973688) high priority updates, try to download "error Code: 643 ' pop-up... Restored my PC if you plant on 31/12/10. My registry was Corrupt questions & material with my Microsoft Wireless Desktop 3000 tried installing the drivers & displays error Code #1603 & abandoned facility... Need solution to install: (KB954430 & KB973688) Please!

  System Restore restores the system to the date on which the restore point was created. All that was installed after the restore point has been created to be installed again. Please see -what is system restore?
  Formats System Recovery HP's tough, reinstalls Windows 7 x 64, all drivers for your computer and all the programs/applications included HP including in their version of Windows 7 from a hidden partition on the hard drive.

  You must burn a recovery disk because they are very useful in critical situations, for example, if the computer does not start up Windows in normal mode.
  Please consult the instructions from HP to do - create recovery disk set in Windows 7

  Here's what the recovery disc can be used for - What are the system recovery options in Windows 7?

  You said ' when I use automatically detect it, for some reason any that it does not detect it. .
  I'd be willing to bet that Norton Internet Security (NIS) blocked installation of a file that HP tried to install Internet Explorer so that your system could be identified or blocked communication with HP web site, or that you do not see the command prompt to install the file.

  IF it were my computer I would do it.

  1. download and save Microsoft Security Essentials for x 64 Vista and Windows 7 systems . The MSE download page automatically detects the operating system and the architecture of the system (32 or 64 bit . Le_votre is 64-bit )
  2 uninstall NIS of in programs and features, and then restart the computer.
  Uninstall all other entries of Norton in programs and features, such as Live Update.
  Then download, Saveand run the Norton removal tool. Then restart once more -Norton Removal Tool3. Install Microsoft Security Essentials, restart for the last time.

  Native Windows 7 firewall in conjunction with a router which built into the hardware firewall (mainly all Wi - Fi routers and wireless of today have a hardware firewall that is included with them) provides adequate protection. So, I do not recommend install or use a firewall advantage 3rd with Win 7.

  Now, as for the original question, MSXML 4. If there any MSXML4 dll files on the system, you don't need to install MSXML Core Services 4.0.
  It is only necessary when the software he uses to function.

  So you can hide the two updates because they aren't necessary because MSXML 4 SP2 is no longer installed on the system.
  Open Windows Update in Control Panel.
  In the left, click on the check for updates link.
  I'm fairly certain that KB954430 would be qualified bird an important update available.
  Click on the link available important updates.

  Click on KB954430 right and choose hide. Agree to the prompt you receive.
  If KB973688 is displayed as an important update, then hide that, too.
  After that you have hidden two updates, close Windows Update.

  This should get you going on the right path, Ventaman.

  Expert MowGreen Windows IT Pro - consumer safety

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• Error codes: 643, 8007066F & 80070103 (cannot install updates)

  Tried to install the latest updates and got three error codes: 643; 8007066F & 80070103

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052>

  0X8007066F ERROR_UNKNOWN_PATCH
  The update is not applied to this product.

  (1) * which * update fails to install?
  (2) * what * is the edition of Windows; Service Pack much * is it on?
  (3) don't you try to download manually, * save the update * and then
  try to install it manually again?

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx>

  Windows Update 80070103 error code applies to all editions of Windows Vista.
   http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103>

  See also the below Knowledge Base article suggestions.
   
  You receive error 0 x 80070103 when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/952032

• Windows 7 - error Code: 643 (cannot install KB2160841)

  I continue to be unable to download a security update. I have Windows 7. I get the error code: 643.

  I have been successful in downloading all the other updates.

  could I have to download other updates for my computer compatible? Or do you have other suggestions?

  You receive error code 80070643 0 x or 0 x 643 , error code when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

  If this does not help, try this:

  Credits go to Control_tps
  
  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  If not fixed, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx ), reinstall it and install the updates.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista - Error Code: 643 (cannot install KB973923)

  Hello

  I had this problem for a long time and I've searched through the forums and tried several solutions.  I use vista SP2 and whenever I try to install the update of security for microsoft visual c ++ 2005 service pack 1 redistributable package (KB973923) it fails and gives the generic error code 643.  I tried the fix - it solution, I tried to uninstall the .net framework and resettlement, as well as a few other things that I don't remember, I tried analyses current antivirus to run in SafeMode with 3 different products anti-virus and anti-malware and it always comes back clean.  that it causes me problems because I believe that it is related to a problem I install itunes, (although I could be wrong on that) I've read elsewhere that people have had the same problem itunes until they solved thie c ++ problem

  any help would be great because I am pulling my hair out with this!

  Concerning

  John

  Hello

  Try this:

  You receive error code 80070643 0 x or 0 x 643, code error when you use Microsoft Update or Windows Update Web sites to install updates http://support.microsoft.com/kb/958052

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista update error code 643, 490 & 8007371B

  I'm running Vista Ultimate and months get error code 643, 490 & 8007371 B and despite the exyensive the search for solutions, I can not only solve these problems to download. It seems that the absence of these downloads are inhibiting the SP1 update.  Can anyone help?  DELBOY22

  * Title *.
  Vista update error codes

  Hello
  
  a. updates you trying to install?
  have b. you tried the troubleshooting steps?
  You can try the steps outlined in the article below and check if it helps.
  http://support.Microsoft.com/kb/958052
   
  Check also the updates fail to install in windows update history. After the same return so we can help you better.
   
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I keep getting error code 643 what's wrong! . NET FRAMEWORK 1.1 SERVICE PACK 1

  Is there a quick fix?

  Uninstall all the framework & reinstalled tried to install always the same error code 643.

  Help!

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  =========================

  What to do if other .NET Framework configuration troubleshooting procedures do not help:
  http://blogs.msdn.com/astebner/archive/2008/03/07/8108332.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 643 trying to update XML Core Services 4.0

  Hello

  I get an error code 643 trying to apply the following two updates by using Windows Update in Windows 7 Home Premium;

  -Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64-based Systems (KB954430)
  -Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64-based Systems (KB973688)

  I tried to update more than 10 times without success.  I get the error details: Code 643 for updates.

  Each update else installed very well so far.

  My system specs are:

  Windows 7 Home Premium
  HP Pavilion dm3 Notebook
  AMD Athlon Neo X 2 Dual Core processor l.335 1.60 GHz
  4 GB OF RAM
  64-bit operating system

  I noticed that there is no file msxml4.dll on my Windows/system32 folder.

  Help, please.

  Thank you.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0,

  or 3.5, you may receive the error Windows Update '0 x 643' or Windows code

  Error code install "1603".

  http://support.Microsoft.com/kb/923100

• error code 643 during the installation of security update

  I have just run into the same problem!

  Todays Nov 25/09 windows automatic update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688).
  Installation status: failed
  Error details: Code 643
  Update type: Important

  Processor Core 7 920 Windows 7 standard upgrade to Vista Ultimate.
  Ouch again. That's the second problem with W7. Wasen can't able to install Flight Sim in windows7 says component MSXML 4.0 SP2 is not installed, please reinstall Flight sim to restore or repair, does that twice, but it does not work. This failure of XML Core Services could be linked to the MCXML 4.o problem?

  I followed all the commits that I can find, but not of specific solutions.

  I'm having the same problem (Vista). I can't find a solution validated for the error code 643 for the fix described.  I keep being told that the installation has failed.

  RandomMann,
  If you are still having this problem then take a look at this thread because it covers this error.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.