Error code 646: I could not successfully install an upgrade (upgrade of security for WORD 9, # KB2092914)

Similar Questions

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• error code 80080005 'Windows could not search for new updates"

  error code 80080005 'Windows could not search for new updates"

  What operating system?

  http://support.Microsoft.com/kb/910337
  This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then click OK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and click OK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  TaurArian [MVP] 2005-2010 - Update Services

• error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

  error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

  Hi vivasiousv,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  See the links in the Apple Web site and try the steps mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=6096760

  http://discussions.Apple.com/message.jspa?MessageID=8436848

  For additional support post your query in the Apple discussion.

  http://discussions.Apple.com/category.jspa?categoryID=150

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• Some updates could not be installed: failure on the following security updates - KB974811 KB974556

  Please help me solve this problem.  I have automatic updates set to say "updates are ready for your computer.  Click here to see these updates'; Here is the little yellow icon in the system tray low to the right of my screen.  What happens when I click on this icon is usually I then click 'express install' (and non-personalized) and then press "install".

  My computer sometimes slows down a bit that it downloads / installs these updates and which can be quite a pain in the thigh because it effects everything that I'm working at the moment, and of course because you have to restart the computer.  I have external hard drives 4 or 5 so I to sequentially turn them off one at a time by ejecting them, turn off the computer and then start it back up and restart the hard drives.

  In any case - I can never remember to "SOME UPDATES COULD NOT BE INSTALLED the SCREEN" so I'm at a loss to know what to do.  My computer is perpetually slow because the small yellow Update icon sits in the systray continually trying to draw attention to me and when I do the same thing continues to be time and again - failure!   I tried closing down my antivirus and windows firewall, but nothing helped.

  your help would be much appreciated, either tell me how these updates to get the update of my systray icon, or to get updates of pit.

  According to belarc Advisor - I am running:

  Windows XP Media Center Edition Service Pack 2 (build 2600)
  3.00 gigahertz Intel Pentium 4
  cache of 16 kilobytes main memory
  secondary memory 2048 k-cached

  9 of Avira antivirus
  SUPERAntiSpyware (although it is installation not not at the auto of the msconfig, so its off to the update)

  Thank you!!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error code 646. Do not install the update of Windows for MS Office 2007 System KB2288931 security

  Have tried to install the Windows for MS Office 2007 System KB2288931 security update that has failed several times since 12/2010 with errors found Code 646. Windows Update Troubleshooter could not identify the problem.

  Tried using the troubleshooting as well as various solutions of help at home in Windows without success.

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6336c34e-fd96-4ff8-bea7-a8f14a98d6fe>

• Error code: 41 d (could not install an update)

  I can't install 1 update. Why?

  Error code is - 41 d

  And it's my windows vista real?

  Inform me please

  And it's my windows vista real?

  See: http://www.microsoft.com/genuine/?displaylang=en&PartnerID=4

  and run validation to know.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows update error Code 8024200d. Could not install the updates

  Vista Windows than ultimate SP2 failed to install the following: update security update for Windows Vista (KB2378111) update for Windows Vista (KB2345886), update security for Windows Vista (KB2570791), update security for Windows Vista (KB2564958), for Windows Vista security update, update for Windows Vista (KB967723) Update for Windows Vista (KB972145).

  Help, please.

  Concerning

  Ahmad

  You will need repair Windows.

  To do a repair installation, you will need your product key and the Windows Vista DVD. You can also create a backup just to be sure.

  Insert the DVD in your drive, the installer must come, click on install, then choose to upgrade and NOT personalized, follow the prompts. You must reinstall updates after doing this.

  UTC/GMT is 23:25 Friday, November 4, 2011

• Vista - Error Code: 80070426 (Windows could not search for new updates)

  I have Windows Vista Home Premium Service Pack 2 on HP Pavilion dv6700 Notebook PC 64 - bit operating system. For about a month, it stopped updating. Whenever I want to update it gives me the same message "Windows could not search for new updates. Error encountered, Code 80070426 ".

  After the possible solutions for others, which posted a similar problem, I typed "service" on start search and on the side slsvc, it gives a description. When I click Start the service, it gives me the message "error 2: the system cannot find the file specified."

  I appreciate any back feeding to help me solve the problem.

  Thank you

  Mikielle

  mikielle,

  0x80070426 - ERROR_SERVICE_NOT_ACTIVE the service has not been started

  Make sure that the automatic update services has been started.  Make sure that BITS is started.

  1. click on start and run, type services.msc, and then click ok.

  2. in the list of services, click on automatic updates, and then click Properties.

  3. in the startup type list, click Automatic, and then click on apply.

  4. If the service status is stopped, click Start, and then click ok.

  5. right click on background intelligent transfer service, and then click Properties.

  6. in the startup type list, click Manual, and then click on apply.

  or

  1 ddwnload and install the wga http://go.microsoft.com/fwlink/?linkid=56062 diagnostic tool

  2. after running the wga diagnostic tool, click the "windows" tab and then click on 'copy to clipboard '.

  3. then, visit the following Web site and create a post in the forum "problems of wga validation" and paste the results of the diagnostic data in a detailed post wga:

  http://forums.Microsoft.com/genuine/default.aspx?siteid=25

  4. a wga troubleshooting specialist will analyze the data and recommend an appropriate solution.

• Error code 646 received when attempting to install the following UPDATES: Microsoft Office OneNote 2007 "&" update for 2007 Microsoft Office System ".

  I tried several times to automatically install these updates without success.  Any suggestion would be appreciated!  Thank you.

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, are your Windows Update and the Background Intelligent Transer Services set to Automaticand started . You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement of contract and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  See you soon,.

  Barbara

• Error code 80072EE2: Windows could not search for new updates.

  I am unable to get the Windows updates.  I repeatedly receive 80072EE2 error code: Windows could not search for new updates.  The help of instructions indicate I would add three updated addresses my firewall.  I am running McAfee Total Protection with a firewall, but I don't see an option to add addresses.  Do you have suggestions about this problem?

  Hello

  Did you face this problem after installation of McAfee?

  Follow these steps:

  Method 1: There is no option to add the URL of Web site in McAfee firewall.  However, you can add the URL in the filtered McAfee Web site. Click Parental control, clicking n config on the right panel, by clicking the forward button, and then click filtered Web sites on the left had Panel Add URL.

  Windows Update error 80072ee2
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Run the Fixit and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

   

  Method 3: If this does not help, you can temporarily disable the antivirus and check if that helps.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• I get an error code 646 when I try to install the new update update of security for Microsoft Works 8 (KB973636) _

  keep getting error 646

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Just updated Muse 2015. Now download Error Code 500. "Could not generate code to activate one or several web fonts on the 'Home' page. Any ideas?

  Frustrating having five updates to a Web site that comes to take 2 hours and still cannot export as HTML. Hope someone can shed some light here for me. Thank you!

  Hello tjsmithink,

  Please, try the suggestions by Abhishek in the similar discussion below:

  Error: Could not generate code

  Concerning

  Vivek