Error code 646 is displayed when I try to install the following updates

Similar Questions

• Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install

  I tried typing in the KB2680317 and tried a manual install and again, it won't install the update but comes up with the error code 646 and 1 update failed. What can I do else? Thank you!

  Hello

  These can help you:

  Method 1: Run the Microsoft fixit

  Review the information in the site mentioned below

  http://support.microsoft.com/kb/2258121.

• Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install and my pc (Windows Vista 64-bit) keeps crashing.

  My pc has attempted to install Windows Update (see above) without success. Tried the Microsoft Fix It without success. Computer continues to crash with attempts.

  Hello

   
   
  
  Were there any changes (hardware or software) to the computer before the show?
   
   
  Method 1: try the manual steps from the link below and see if the problem is resolved.
  http://support.Microsoft.com/kb/2258121 
   
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  
  Method 2: perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  
   Method 3: download and install the update manually and see if it helps.
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29346
   
   
  Hope this information helps.

• I get the error code 0 x 80240036 when you try to install the updates.

  I just be reformatted my old pc. Dell Dimension 5000, 9 years. Windows XP. I try to use the windows updates, but he repeats to me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"and I get error code 0 x 80240036.

  I installed internet, itunes etc so I know that the computer is updated for other programs.

  I reformated this computer once or twice during his lifetime but did not encounter this problem before.

  Any advice would be great.

  Thank you

  Original title: Windows update problems on pc of the year 9 after reformat

  Hello Crom

  My first advice is to slowly get out of Windows XP... It's time to upgrade, but that's my opinion.
  This problem is very common and can be easily solved by:
  1. Download the latest Windows Update Agent
     http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe
  2. Then click on your keyboard click the Windows + R at the same time
  3. Type CMD and press enter
  4. Now, enter the command

     net stop bits

  5. Run the Windows Update Agent
  6. Enter the following command at the command prompt (step 2):

     net start wuauserv

  7. Now, enter the command

     Net start bits
  Let me know if it solves your problem.
  Yuri

• Code 646 error when I try to install the following updates. I've disabled windows firewall and tried to install it and returned the same error code. IM using WIndows Vista

  Update of security for Microsoft Office Excel 2003 (KB978474)

  Update of security for Microsoft Office PowerPoint 2003 (KB976881)

  Update for the junk e-mail in Outlook 2003 (KB979771) filter

  1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB978474&displaylang=en&stype=s_basic

  2. http://www.microsoft.com/downloads/en/results.aspx?pocId=&freetext=KB976881&DisplayLang=en

  3. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB979771&displaylang=en&stype=s_basic

  Have you tried to manually download each update to Office 2003 that failed with this error code, because it is the current solution for the error 646 for the Office updates.

  TaurArian [MVP] 2005-2010 - Update Services

• I get an error code 646 when I try to install the following updates for my model of gateway DX4200-09: KB973709 KB972581 KB974234

  update of security for microsoft office visio viewer 2007
  Update for 2007 microsoft office system security
  Update for 2007 microsoft office system security

  A workaround for this error is to install the updates manually.

  Go here and look at each update and install the same.
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972581&displaylang=en&sType=s_basic

  Save the files to a place, you can find them and then install them.
  TaurArian [MVP] 2005-2010 - Update Services

• Get the error code 0 x 80070643 when you try to install the Office 2003 security updates

  I tried to install updates for Office 2003 security for several weeks now. Updates are downloaded but continue to fail with the error code 0 x 80070643. Can someone help, please?

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  http://support.Microsoft.com/kb/903772

• Why the driver update fails with the error code 800705 b 4 when I try to install the latest video driver for my Dell vostro Intel computer laptop?

  Windows Update tries to update the Intel driver newly released my laptop Dell Vostro 3750.
  I get error code 800705 b 4 every time.
  Any ideas as to the cause?
  I get system freezes lately and want to make sure I have the latest drivers for all my hardware before contacting Dell technical support.

  Thank you.

  Robert.

  Also, check your windows update settings and provide recommended updates is not selected for the automatic update, but only the important updates.

  Aside from not not using drivers available under recommended updates, for all other first check the details as to whether its relevant for your specific use.

• When I try to install the Flash update he asks a password that does not close and I can't install

  When I try to install the flash update I get a request a password that is not out to please help

  Hello

  You use Windows or Mac computers?

  If you use a Mac, it's the Mac OS which is asking password and not Adobe Flash Player. Please follow what userid & password I need to install Flash Player?

  -Varun

• error code 646 keeps appearing when I try to get critical updates?

  error code 646 on critical updates?  any suggestions?

  See: http://support.microsoft.com/kb/2258121 TaurArian [MVP] 2005-2011-implementation to date of Services

• I get the error message when you try to install the automatic updates of code 8007065E

  I use Windows Vista Home Premium with Service Pack 2. Two updates automatic Windows are repeatedly not to install and error codes are 8007065E Code and Code 1, which doesn't seem to appear on the Windows help site. Has anyone else had these codes and if so, how can they be solved?

  Hi Paul Rabbetts,.

  (1) how long have you been faced with this problem?

  (2) the windows updates are unsuccessful? Please provide the number of the Base of knowledge (KB)

  It is sufficient to indicate the complete error message you receive.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Let flow the fixit available in the article below and then check

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Download and install the updates manually from Download Center in the clean boot state
  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4:  Clean boot the computer and then try to install the updates

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Error when you try to install the software update of tax

  It is for the HR Block Tax software,

  Update installs successfully on the XP machine, but on windows 7, I get this

  "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

  I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

  Google and seems that it may occur with other programs as well. Have not found a solution very clear.

  Hello Joslinm,

  1. do you get this error when you try to install any other application?

  I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

  http://www.hrblock.com/support/index.html

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I get an error code 646 when I try to install the new update update of security for Microsoft Works 8 (KB973636) _

  keep getting error 646

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get an error code = 0 x 583 when I try to open the superdvr

  I prepare the pilot aparently but when I try to use it I get this error I have windows 7 64 bit. Can someone help please please please? SUPER DVR IS A USB DVR tha serves Conect the surveillance camaras.

  Hello

  ·         Where did you download the driver for the device of Superdvr?

  ·         Have you checked with a different version of the operating system (Vista/XP) if it works?

  Check if the device is compatible with the Windows 7 64-bit operating system:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=SuperDVR%20

  You can try to start the camera in compatibility mode and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• I get the error code 0 x 80246002 when you try to install Windows XP Service Pack 2 on my machine.

  I recently did a complete reformat of the hard drive due to other errors.  I also have errors like the file is corrupted after trying to install other files of other non-microsoft Web sites.  Any ideas?

  Vista SP2 is available through Windows Update?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Any of these applications running in the background when you attmpeted to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version that came preinstalled when you buy it and that would have been reinstalled, but invalid, when you reinstalled Windows)?

  The foregoing despite...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft