-Error code 646 - repeated the failures (now for the last two months) to install updates Windows 7 S/W, possibly after installation of Office 2010?

Similar Questions

• I've been trying to download updates from Windows, but they will go through. I received the error code 646 was the last.

  I tried everything that was offered and I am still unable to solve my problem. I also have updates pending when I close my pc but when my pc stops that they still operate as if they were never installed. It says installation updates when I turn on my pc to restart, but still they always appear everytime I go to restart or shut down. IM pulling my hair out on this one. Any suggestion or help please. I didn't do anything or add anything to my pc. I run Vista in case this may help.

  You may have missed: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  Hi phillipt84805120,

  Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

  Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Error code 646 on the security update for office professional

  Cannot install

  Hello

  Try this 1st to see if it helps:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary:

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  It is probably easier to use the Windows updates to find the download.

  Or go here and the KBxxxxxx number to download it. Download Center - mount the KBxxxxxx.
  
  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the groups of the Agency who could
  have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• error code 646 appears: download KB98175, 980729, 980470, 981433. I tried to install manually. No luck

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I need help how to solve this problem

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi ANDRAA,

  You can try to reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  You too, try to install the updates manually check it after you put the computer in a clean boot and then if that helps.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start under the office try performing the update and check what is happening, follow the steps in the article and find out which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  In addition, follow the link below and try the suggestion made by the user.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/d7b9378e-1c8f-4372-ABFD-70852ece41d0

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15-r249tu: for the last two months I inform HP to address my problem with the laptop HP 15-r249tu.

  For two months I contact HP chat support to fix my problem with my HP laptop 15-r249tu with the L2Z88PA product id. The laptop was completely dead and does not work. I contacted HP for cleaning on site (it covers the warranty on site) and there is still no reply fron their side. So I intend to give a complaint to the Court of the consumer against the owner of the store that I bought the laptop (he only said support HP was good and me to buy the misleading HP product)

  It took the shop and he told to contact HP support for replacement of the battery. So I contacted HP support for this problem and they said to do a battery test. So I did test battery and shows like 'calibrate '.

• Can someone help me solve the problem APPCRASH on Windows 7? The problem occurs after installation of Office 2010

  Hi all

  the OS is Windows 7 SP1 32-bit Enterprise Edition.

  I use an important banking software package called ORF more than Misys, the application is critical for the company, the problem occurs after the installation of Microsoft Office 2010 Professional Plus with Service Pack 2; the ORF more crashes when you try to print to a PictBridge compatible printer.

  I get the following message from crash:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: orfplus.exe
  Application version: 5.0.1.0
  Application timestamp: 3f6f479b
  Fault Module name: StackHash_802d
  Fault Module Version: 6.1.7601.22436
  Timestamp of Module error: 521eaab0
  Exception code: c0000374
  Exception offset: 000c38b7
  OS version: 6.1.7601.2.1.0.256.4
  Locale ID: 2057
  Additional information 1: 802d
  More information 2: 802d0d721d077b7993d17470b8164201
  3 more information: d6a2
  Additional information 4: d6a2e9e6b15ae70428294b9407d7e88d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ----

  I tried to exclude the orfplus.exe of the DEP, but that does not solve the problem, the application always crashes when I try to print a report.

  ----

  As a result, we are unable to upgrade our office staff of Office 2010 Professional Plus application.

  I appreciate if someone can help me solve this problem.

  Thanks in advance.

  Hello Matt,

  According to the issue description, it seems that you are connected to a network domain, so I suggest you to republish your query on the TechNet forum and I hope that you will receive a response it a better way that they are trained on the computers in the domain and their settings.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Windows Update failed. Get the error code 646.

  I am trying to install windows updates.  Service pack updates and Office (15 updates total office).  Updates download and go through the installation process.  But I got an error code (646) until the installation is complete.  I even tried to install updates at the time and still the same results.  I have uninstalled and reinstalled ofice.  Still a no go.  Help someone who has an answer.  It's really frustrating.

  OK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.

  Here are the steps that I took... which I think should work:

  (1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

• updates for microsoft vista KB2431831 and KB971029 will not install I get an error code 646

  The Microsoft Vista download KB2431831 and KB971029 will not install, I tried manually install all I get is error code 646

  the KB includes an automated fix this that solves the problem, look here: http://support.microsoft.com/kb/2258121>

  Let me know if this helped.

• Vista - Windows update fails, the error code 646

  My windows update failed code 646

  My windows update failed code 646

  Hey wagmalik

  Microsoft gave advice about your error code 646 in the microsoft below link

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• Error code: 646 (cannot install 982311 KB, 982133, 980923, 982157, 982122, 982134, 983503)

  I would like to know how to give at the end of this problem being present for me into thelast 3 weeks?

  I do not accept to install updates and after some time the result of the update ends with error code 646 showing the required updates were not installed? and this question always show for me after each test update.

  the required updates are: KB982311 KB982133 KB980923 KB982157, KB982122, KB982134, KB983503

  pls help!

  Hello
   
  To resolve this problem, you can follow this link forum below and follow the suggestion provided by Kim - Support Engineer.
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How can getting error Code U44M1P7 during the upgrade, I fix?

  How can getting error Code U44M1P7 during the upgrade, I fix?

  Update product that you are trying to install?

  Is it compared to the creative or perpetual clouds?

  Please check following if you have creative clouds.

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

• Error code 646 for the Vista updates

  Still cannot load updates 11. Follow-up to this process:

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under.

  2. in the list record under , click all files.

  3. in the file name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

  6. try to install the updates again.

  Get the error code 646 Windows Update encountered an unknown error. Whats next to try?

  Hi Tom,

  Microsoft has released a "Fix it" solution that should automatically solve your problems with Windows Update. Click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If it does not then solve the best suggestion for now would be to try to install the updates manually from the link below.

  http://support.Microsoft.com/default.aspx/GP/downloadover/en-AU#TAB0

  If you know the updates that must be installed, you can manually enter the KB update in the search bar the link to download the update manually.

  If this leaves you too unhappy then made me know Service packs installed for Vista on the computer.

  See also the link to the thread below.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  Let me know if this helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error code 646 when trying to install the update of security for Microsoft Works 9 (KB2431831) _

  I tried to install the update of security KB2431831 for Microsoft Works 9 several times.  Whenever he fails and give me "Update error code 646 Windows has encountered an unknown error.

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/21092c30-da71-4b7c-B242-1b32b28242bc >