error code 663 while trying to install the update for silverlight KB26990729
Have tried several times to update the two Trend Mico but will not because of the absence of windows vista home premium updates and yet no update will load
Hello
Did you last modified the software on the computer?
I suggest to disable anti-virus and try the steps mentioned below.
NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Then I suggest you go through the steps mentioned in the link and the Coachman. You can also run the FIXIT from the link below.
Method 1:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If the steps do not help, then you can go to the method 2:
Method 2:
I also suggest you go through the steps mentioned in the link and the Coachman.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Method 3:
You can also try the FIXIT from the link below and check.
How to manually clean a broken Silverlight installation
If the issue does not help, then you can also post your query to:
Welcome to the Silverlight.NET Forums
http://forums.Silverlight.NET/
Tags: Windows
Similar Questions
-
I get an error code 1402 while trying to install the update for adobe acrobat 9 standard.
Try to install the latest update to acrobat 9 standard, I get the error message 1402. Adobe technical support tried to adjust my admin settings to allow the update, but got an another error message saying that access is denied to a particular folder Acrobat9/resource/CMAp. I tired changing setting of security/admin on this point, but no luck. Technical support Adobe that it is a question of authorization/administrator MS. help?
Cannot install original title update: adobe acrobat 9 standard
Hi basically,
Method-
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Perform the steps in the article-
Note: The antivirus will try to repair the defective hard disk sectors damaged by viruses. Data on these areas could be lost in the process. Proceed at your own risk.
Hope this helps!
-
Error code 800F081F while trying to install the update to windows security
I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!
Thank you!
source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()
Clear your Temp File/Cache first upward.
http://winhelp2002.MVPs.org/delcache.htm>
Click Start > all programs > Accessories > System Tools > Disk Cleanup
Better and easier to use - CCleaner.
Download the basic build (slim) via
http://www.CCleaner.com/download/builds.aspx>
The basic build (slim) does not contain the toolbar disgusted
Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.
Reset
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821>
If the system update tool does not resolve the problem, you will need repair Windows.
UTC/GMT is 15:34 Wednesday, June 13, 2012
-
I get an error code 646 while trying to download the updates
I get an error code 646 while trying to download the updates, update security for Microsoft Works 9 (KB2431831)
Download size: 2.1 MB
Help, please
See this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I tried to install the update of security KB2431831 for Microsoft Works 9 several times. Whenever he fails and give me "Update error code 646 Windows has encountered an unknown error.
See this response archived from a previous thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/21092c30-da71-4b7c-B242-1b32b28242bc >
-
I get an error code 80240016 while trying to install windows updates
Original title: update windows
I am trying to install windows updates, but I keep getting the error code 80240016 fact anyone know what this means?
Hello
Follow the steps in troubleshooting section and check if that helps:
Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
-
Windows Update failed to install KB 2092924 for Microsoft Works 9 and invites me to insert the disc of Microsoft Works 9, and then click OK. Microsoft Works 9 was preinstalled on my Dell computer and I do not have a disk. I believe that there is a missing file but have no idea as to how to proceed.
Hi Lilobodo,
The question you have posted is related to the installation of updates for Microsoft works 9 that is preinstalled on your computer and would be best suited to the Microsoft Works community. Please visit the link below to find a community that will provide the support you want.
http://social.answers.Microsoft.com/forums/en-us/addworks/threads
I hope this helps.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I use Windows XP Home Edition Version 2002 Service Pack 3.
Here is a link to a thread on the MSDN forums dealing with this problem and a possible solution. Thread Also, if you run law or another program directly using SQL, you can try to uninstall the program, run the update, then reinstall the program. If you have tried only to install this through Windows Update you can want to download it and run it directly from your desktop.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
error messages
Might be better to post here: SQL Server Setup & Upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/
or
(5bc30920-5d3c-4a4e-8672-ff97b0e9252f) http://social.msdn.microsoft.com/Search/en-US/?query=737D%20&rq=meta:Search.MSForums.ForumID & rn = SQL + Server + mounting + % 26 + Upgrade + Forum TaurArian [MVP] 2005-2010 - Update Services -
Error Code 66 what tried to install security update KB2446708
I get error Code 66A when trying to install the update of security KB2446708. I'm running Vista 32 bit with Service Pack 2 security update according to the status of safety program area. Any help would be much appreciated!
Try this link and then update. It worked for me and a few others. This will be fix/update your .net Framework (I have 32 bit too).
-
I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).
I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.
Ran the update without any firewall or AV program running and still received the same error.
AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.
Hi a93svtf,
This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.
Step 1: Run the fixit available in the article below
You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336
Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Now, try to install the update
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I am getting error #1328 in acrobat XI while trying to install the update.
I get the #1328 error while trying to install the update to acrobat XI. The error that says that it has not applied the patch for C:\config.msi\PTFBD7.tmp I uninstalled and re-installed acrobat as the help page, told to do, but it will not yet installed the update.
Sometimes, the questions are about disabling antivirus and be logged in as an administrator. Another tactic is to download updates directly from Adobe at http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install manually.
-
670 error when installing the update for silverlight KB2416427
Original title: cannot install the update for silverlight KB2416427
- 670 error cannot install the update for silverlight KB2416427
Hi ithakiman,
1. which version of the operating system?
2. have you tried to install the update manually?
First try to install the update manually and check.
See the links to download the update below:
http://www.Microsoft.com/Silverlight/
Description of the update for Microsoft Silverlight: 28 September 2010
http://support.Microsoft.com/kb/2416427
Also you can post your question in the Silverlight forum for further assistance:
http://forums.Silverlight.NET/forums/13.aspx
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Have tried to install the Windows for MS Office 2007 System KB2288931 security update that has failed several times since 12/2010 with errors found Code 646. Windows Update Troubleshooter could not identify the problem.
Tried using the troubleshooting as well as various solutions of help at home in Windows without success.
See the following topic for your question
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6336c34e-fd96-4ff8-bea7-a8f14a98d6fe>
Maybe you are looking for
-
9.3.2 latest update crashed my card mother iphone 6
Hello people, My phone worked perfectly normal, once the 9.3.2 last update downloaded on my phone... and when the installation process is finished, phone booted up and went in to connect to itunes symbol. And im unable to restore it... gives me error
-
Satellite M70-151 - SDHC does not work
HelloI have a problem with SDHC memory card. My Satellite M70 can not use this card. When I plug the card into the slot, that nothing is happening. It is the 8 GB card. Is there a driver to install because I found nothing?
-
call VB DLLs in one registry LW the dll and use invoke node
Hello How is possible to call Visual basic labview DLLs. I read articles about it, I should do first of all a "open Automation" and "invoke the node." How can I tell witch dll will be used for the call? With the registration of regsrv32 or how? I dow
-
Security for Microsoft Office Word 2003 (KB2598332) update fails to update
Gentlemen: each of these updates have failed: Update of security for Microsoft Office Word 2003 (KB2598332) Update for the filter of junk e-mail in Outlook 2003 (KB2598343)Update of security for Microsoft Office 2003 (KB2598253)Update of security for
-
Power Button lockout allows me to turn the monitor off.
A button on the front of my HP 2310e monitor allows me to turn the monitor off. When I try to do a "Power Button locked" message. How to fix this?