Error code 66A, 800706BE and 800706BA when installing updates.
What should I do? All updates are important, and some have been waiting for a long time now that I have not had time to find solutions (and I'm still you wonder why should it be me who find solutions to AUTOMATIC updates...)
Please advice clearly, I'm not a tech genius!
- Who is the update that you are trying to install?
You can use the following methods that can help you solve your problem:
Method 1:
I suggest to fix the .net framework functionality in Windows and then try to install the update.
Steps to repair Microsoft .net Framework
a. Click Start, and click Control Panel.
b. navigate to the program and features.
c. scroll down for Microsoft.Net Framework 4 Client Profile, do a right click.
d. it will give you a choice of uninstall/change, click it.
e. then it will give a choice to repair it, choose repair. It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.
f. When finished, open Windows update and update again.
Method 2:
a. Click Start and type Services in the search bar and click on enter.
b. go to the following Service and make sure the following boot parameters are enabled:
- Remote procedure call (RPC) - automatic
- Remote Procedure Call (RPC) Locator - Manual
c. If you need to change one or two parameters, restart and check again to make sure that the two settings are still in effect.
Method 3:
If this isn't the case, perform the methods listed in the section below and check if that helps to install the updates successfully. http://support.Microsoft.com/kb/940520
Tags: Windows
Similar Questions
-
error code 0 x 643 returned when Windows Update failed in the XP Home laptop system
Could not install Win Update (KB951847) x 86 called MS .NET 3.5 service pack 1 + update .NET framework 3.5 .NET 2.0 to 3.5 worm family. I need help to fix my laptop Win XP Home to accept this update, but also cases of simultaneous failure of (KB969615) windows update error code 0 x 4397 - MS Office 2003
You will have to reinstall applications
1. how to fix corruption problems MSI software update registration
http://support.Microsoft.com/kb/9711872. If this does not work-
Versions of the .NET framework must be installed in this order, .net Framework 3.5, .net Framework 1.1, .NET Framework 1.1 SP1
Follows (in reference to the removal for the framework and associated information tool)
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982TaurArian [MVP] 2005-2010 - Update Services
-
Windows 7 - Error Codes: 8007066F & 6 b 2 (cannot install updates)
I have set up updates to be installed automatically. Everythinghas been fine until about 2 weeks ago. Now, I have 4 updates that I can't install it. The error codes are 8007066F and 6 2 b. I have windows 7.
8007066F ERROR_UNKNOWN_PATCH - the update is not applied to this product.
IF the second code is 800706 B 2 RPC_S_NO_PROTSEQS_REGISTERED - no protocol sequences have been registered.What's next for security/antivirus installed, please?
We use a 3rd party firewall?
Subscription of the following AV/security is current; whatever it has detected the last time that the system has been analyzed?You can check if the suite installed AV/security / 3rd party firewall is at the origin of the installation problem by configuring Windows 7 to the clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
NOTE: in the Clean boot configuration all the 3rd party firewall will be disabled. Make sure that the native firewall of Windows 7 is now on by opening the Windows Firewall in Control Panel.The update was damaged by either more AV/s installed / 3rd part firewall. You can also try to manually download andSave the 4 updates in question. Open Windows Update in Control Panel. Then click on the link to View update history to see which 4 have failed to install. Write them.
Go to the Microsoft Download Center. Enter Ko and the update number of Search All Download Center, and then click the magnifying glass to search. Save all downloads and installation with all the programs, or closed browsers.
NOTE: download the updates that correspond to the architecture of the system. If the system is 32-bit, then download the x 86 version. If the system is 64-bit, download the x 64 version.
To see what is the architecture of the system, click on this link - resolution 2: run the system update readiness tool
Then click "Click here to show or hide detailed information" and follow the detailed steps.MowGreen Services update - consumer safety
-
Original title: window update problem.
Error code: 80246008 error Code 0 x: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 what its means? And how to solve this problem to?
(merged thread)
Hello
Did you do any hardware changes or software on your computer before this problem?
You can follow these links & check if it helps:
Hope the helps of information.
-
Original title: 80070663 error code appears when...
This error code is displayed when I try to manually update the "WindowsUpdate_8007063" and "WindowsUpdate_dt000". The automatic update has not once or twice each of these 8 days or more.
you have problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
If you use Microsoft Office, you can run the Microsoft Fix it 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>
-
Error 643 and 8004FF01 when installing updates
original title: problems with Windows Update
Windows Vista Business Gets the error message 643 and 8004FF01 when you try to install the updates. In addition, there is an error of Windows Installer produced as well.
Adding to the suggestion of Hula_Baloo you can also try the following.
Method 1: reset the Windows Update components.
http://go.Microsoft.com/?linkid=9665683>
This tool automates the most common fixes problems with the Windows Update site. Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.
Method 2: check the status of Windows Installer and installer of Modules of Windows.
I. click on start and type Services.msc and press ENTER.
II. Locate the Windows Installer Service.
III. double click it to check if the service is started or not.
IV. change the type of startup to automatic and Start the service.
V. check the same thing for Windows Installer of Module service.
VI. Press ok and close the Services window.
UTC/GMT is 16:04 15 may 2012
-
I get these two error codes 65535 and 0x8000ff, I'm running Vista 32 bit, with only 1 GB of Ram and use a memory stick as a RAM boost option. System starts as usual, I can connect to the Web, but don't load all files, folders and applications. I have icons on the desktop, but like I said nothing loads. have you tried Live One Care safety scanner, downloads, but used to run, just get the codes above, no matter what I try. In desperation I tried a complete reinstall, still did not work and can not find the productkey.
Thanks for the reply, we, ve decided that the hard drive is shot to pieces, and will install and old windows xp disc i've got. to solve the problem.
-
Error codes: 0 x 80070490 & 80070002 (cannot install updates)
The site at http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us says
[Error number: 0 x 80070002]The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. Update control panel screen shows an unknown error... 80070490
an idea for help
Thank you, james0 X 80070002 ERROR_FILE_NOT_FOUND
Description
The system cannot find the specified file.
Description of the update of the system for Windows Vista tool
http://support.Microsoft.com/kb/947821>
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
....... If the system update readiness tool solves the problem, you will need repair Windows. .....
http://support.Microsoft.com/default.aspx/KB/958044?p=1>
03/23 / 1105:50: 02:00
-
Vista - Error Codes: 800b0100, 80070020 & 8024200 D (cannot install updates)
First of all, when I try to update my computer, I have three error codes that appear. They are 800b0100, 80070020 and 8024200 D I tried deleting multiple tool windows using the software and to remove errors, but errors remain. Second, the computer moves very slowly. I cleaned the temporary files and history, but he is dragging a few minutes between mouse clicks. According to McAfee, I have no viruses, spyware or malware issues. The error messages that prevent the computer to update would be the issue here? Thank you for your help in advance.
Clone of IBM, Vista 32-bit, 2 gig RAM
HelloStep 1: Try the steps in the below articles, one by one, to solve the problems of windows update issue.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020
Step 2: Look for the performance of the computer in safe mode (do not check for any update of windows. It does work in safe mode.) and after return the same thing.Reference:
http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
The computer can also be slow because of the virus/third party software installed on the computer.
You can try the steps outlined in the article below and check if this help.
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
http://Windows.Microsoft.com/en-us/Windows-Vista/products/features/performanceThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
error code 646. I can not install updates of the window
I have an error code 646 and I can't install publishes it window at all.
Hi donki4jesus,
· This error occurs with a particular update?
Run the fix it from the link below and check if this can help: code error '0 x 80070646', '646', or '1606' when you try to install the Office updates: http://support.microsoft.com/kb/2258121
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error codes: A 80071, 91 & 643 (cannot install updates)
I had this problem for about a month.
A 80071, 91 code error means that the Transaction Resource Manager is not running.
Remove all files in the folder "C:\Windows\System32\config\TxR" and run this command:
fsutil resource setautoreset true c:
If this does not work, try this:
http://support.Microsoft.com/kb/948252
You are now able to install updates?
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Having this problem with windows update for a month now, 2 years without problem even after uninstall of numbers and install last Toshiba out of the box, last mth recovery due to virous, completed programs, WUpdate worked for an hour, then started giving me all this error codes whenever I click Update. So what's the problem? Try all your suggestions on this forum of people with the same problem, and none worked for me. At soon Hen
I assume you are using Spyware Doctor with Antivirus.
Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]
6. restart a last time & test.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Vista Home Premium 64 bit some of these error codes failed and some were cancelled. Help!
Hi FORWHENIKNOWNOT,Since the update failed, check if the following steps help you.Method 1: Reset the Windows Update components and check if it helps. To do this, open the following Knowledge Base Article and click on Microsoft Fix top.How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-usMethod 2:Try to download and install the stand-alone package with updates from Microsoft Download center and check if you encounter the error.Put the update number in the link below to find:
http://www.Microsoft.com/downloads/en/default.aspx
Method 3:You can also put the computer in a clean boot state, and then try to install the updates.a. put your system in start mode state minimum helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.b. refer to the KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:How to solve a problem by performing a clean boot in Windows Vista or in Windows 7?
http://support.Microsoft.com/kb/929135Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
What is error code 643 Windows Vista? / (cannot install updates)
I continue to have problems with updates. The last error code is 643. I am running Windows Vista on a Toshiba laptop. L305D 5900
Help, please! Thank you!Error code Windows Update '0 x 643' Windows Installer error code "1603" are generic error codes. As a general rule, these error codes mean that the update was not installed. These error codes are usually caused by a corruption in the installation of .NET Framework or by an inconsistency on the MSI database state.
To do this, follow these steps:
- Click on the following link to download the .NET Framework cleanup tool:http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx)
- Use the .NET Framework Cleanup to uninstall version .NET Framework 1.0, 1.1, 2.0, 3.0 and 3.5
Note The cleaning tool does not remove the .NET Framework 2.0 in Windows Vista or later versions, because the .NET Framework is installed as a component of the operating system. - Restart the computer.
- Download and install the following components:
- .NET framework 1.1http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=262d25e3-f589-4842-8157-034d1e7cf3a3 (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=262d25e3-f589-4842-8157-034d1e7cf3a3)
- .NET framework 1.1 SP1
http://www.Microsoft.com/downloads/details.aspx?FamilyId=A8F5654F-088E-40b2-bbdb-A83353618B38&displaylang=en (http://www.microsoft.com/downloads/details.aspx?familyid=A8F5654F-088E-40B2-BBDB-A83353618B38&displaylang=en)
- .NET framework 3.5 SP1
Note This will also install .net Framework 2.0 SP2 and the .net Framework 3.0 SP2http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en (http://www.microsoft.com/downloads/details.aspx?familyid=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en)
- .NET framework 1.1
- Restart the computer.
- Visit the Windows Update Web site and install the updates
It may be useful
Good luck
- Click on the following link to download the .NET Framework cleanup tool:
-
Error codes: 80073712 & 800 b 0100 (cannot install updates)
Get these error codes when you try to update
valbox,
The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update http://support.microsoft.com/kb/931712
Windows Update error 800b0100 http://windows.microsoft.com/en-US/windows7/Windows-Update-error-800B0100
Maybe you are looking for
-
Since I updated iTunes to 12.4.1.6 none of my devices, iPhones and iPads appear in iTunes when they are connected and the setting is correct, to synchronize this device via wifi. Any help would be great. Thank you
-
iOS 9.3 adds the ability to bring up the soft keyboard
9.3 iOS release notes can be found here: Download iOS information 9.0 - 9.3 In this document, a section lists improvements iOS when a hardware keyboard is attached: Fixes and improvements to the hardware keyboard Allows you to use the arrow keys to n
-
Satellite A300 - point the mouse jumps around
Hi guys,. For some reason any my A300 worked just perfect and all the drivers Toshiba disspeared.So I have no more function keys, press the start/stop utility and so on. I managed to install again but synaptic touchpad driver, didn t turn off.I disal
-
How much does the Skype wifi cost?
-
I have a Hp laptop, 2000 but I neeed to access the bios and I do not know the password the error I get is the following code. 85280672 Help