Error code 80070057 during installation of updates on Vista

Hello
I had the same error code Joe980 and janette gale while trying to install 'Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 86'. I followed the instructions of Martin but as janette, I received a message during the analysis of the system indicating that he had found the corruption that could not be repaired. Then, I continued to step 6 and now have two log files on my desk. The file SFCRESULTS is empty and the CHECKSUR has the following text:

Preparation of control system was updated.
Version 6.0.6001.22275
2009-08-11 12:08

Checking deployment Packages

Audit of manifest Package and catalogs.

Checking package watchlist.

Control of component watchlist.

Verification of the packets.

Control components store

Checking SMI Store
Summary:
Milliseconds: 973807
No error detected

I don't know what to do to solve this problem and so to install the updates.

Thank you

Hello

To resolve this problem, you must clear the existing proxy settings by performing the following steps:

1. open the start menu, select run, type cmd and press ENTER.
2. to display the current, proxy settings, at the command prompt, type Proxycfg.exe, and then press ENTER to run the command.
3. to clear the existing proxy settings, type Proxycfg-d, and then press ENTER.
4. Finally, ensure that the Background Intelligent Transfer Service is running on the computer by following these steps:
1. open the start menu, select run, type Services.msc and press ENTER.
2. scroll through the Services window and double-click on Background Intelligent Transfer Service.
3. If the service does not, on the general tab, click the Start button.
5 re-run the update of Windows Vista on the PC.

Good luck!

Tags: Windows

Similar Questions

  • Error code 80070057 KB963678 and KB963669 update installation microsoft office help

    Hello

    I have install all other updates successfully, these 2 have 963678 KB and KB963669 error code. Can you please help.

    Thank you

    Hello

    Hide updates and if you need it download - SAVE - go to where you put them - RIGHT CLICK -.
    RUN AS ADMIN

    You have Office 2007 installed?

    Updates for Microsoft Office Excel 2007 Help
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=2fbf47a2-E338-4ed8-92f2-b0a146e8593c&displaylang=en

    You have Powerpoint 2007 installed?

    Updates for Microsoft Office PowerPoint 2007 Help
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=7a813892-2033-4210-B96C-10de08abc6ac&displaylang=en Rob - bicycle - Mark Twain said it is good.

  • Error Code 800706BE during installation of Windows Update

    original tile: Error Code on major update of Windows

    Can someone help me with error 800706BE on an important of the Windows Update download which could not install? It concerns Windows hotfix KB 947821.

    I have Windows VistaHome Premium with SP 1 and 2 and a DSL connection. Gateway computer thanks :)

    Hello

    Method 1:

    I would suggest to run windows update to convenience store and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    Try to reset the Windows update components and check if that helps.

    http://support.Microsoft.com/kb/971058

    Method 3:

    Put the computer in a clean boot state, and then try to install the updates and check if it helps.

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Error code 80070424 during the application update the window and installing the Apple Application Support

    Hi guys,.

    I am running Windows Vista Premium Home 64 bit. This all started when update me my iTune recently and since then it has been a headache after another. Basically, when I try to install iTune, it says that I need to install Apple Application Support first, and when I do that, I get the following message appears:

    "An error occurred during the installation of assembly"Microsoft.VC80, CRT, Version... ". "and it lights up.

    In addition, I also tried to install Vista SP 2 recently but my window update also gives me a pain. I can't get the update because when I try, it says 80070242 error code - Windows Update encountered an unknown error.

    Here are the pictures of the 2 filters:

    Any help at all would be greatly appreciated.

    Thanks for the suggestion of Augustine, but the problem is still present. The order went through, but I always feel error 80070424 and is possibly due to a malfunction of Windows Installer Module.

    Thanks for the attempt. Appreciate it.

    Suggest you check to see if the Windows Modules Installer service is present, has not been disabled and can be started.
    Right click the computer on the desktop or the Start Menu and choose Manage
    The UAC prompt to enter a password if one is used, then click on continue or Yes.
    If no password is used, click on continue.
    Click the arrow next to Services and Applications
    Click Services in the left frame
    Scroll down the list of Services in the context of e right until you come of Windows Modules Installer .
    If it is present, check under Startup Type to see if it has been disabled.
    The default setting is manual.
    At the top left will be a link to start the service
    Click on it and see if the service can be started.

    If the installer of Modules of Windows is disabled, right click on it and choose Properties .
    Set the startup type to Manual , click on apply, OK.
    Close the computer management console.

    If the Windows Modules Installer is not present and of Flavius are too difficult for you to follow, then replace
    Contact MS Support free of charge.
    Start here
    Make a mark next to "I use it for my own personal use.
    Now click on the button continue.
    Click on the I accept"" button.
    Support options will be displayed. The only option I see here is for email support.
    Click on the button continue to access the support request form.
    Fill in the fields and then click on the button continue.

    MowGreen Services consumer safety update

  • Error code 80070490 during installation KB978342

    Original title: ERROR DOWN LOAD UPDATE

    I get the error code 80070490 after trying to install the update of KB978342 security, could help with this you problem? seems to down load all the other updates ok I have vista Home premium, service Pack 2, 32-bit

    Don't know what you're updating trying to install as I couldn't find it.

    With regard to your error.

    0 X 80070490 - ERROR_NOT_FOUND
    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    http://support.Microsoft.com/kb/931712
    "Explains the SFC / Scannow.

    See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    A repair install is the usual solution of SFC/scannow does not work.
    However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
    http://support.Microsoft.com/kb/958044

    NB: If you have installed SP1 or SP2 for Vista

    Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
    http://support.Microsoft.com/kb/948537

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
    http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

    Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • error code 80070570 during installation KB2705219

    Impossible to find a solution fo update error code 80070570 when you try to install KB2705219. I have windows vista 32 bit. Have you had recurrent problems of this type of update and you'd be grateful for any help.

    Hi RogerToebe,

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

  • Receive the error code 80070490 during installation kb2588516

    change the title: I am unable to get kb2588516 to install on Vista Ultimate w / SP2, error code 80070490

    It's the only update of November 2011 does not install

    It worked for me

    After you run this kb, I could install the "installable" update
    WB
  • Error code: 80004005 during installation KB3033929

    From my research, it seems that I'm not the only one with this problem.  However, I have Windows 7 Professional, 32-bit, with Service Pack 1.   My computer tried to install the update KB3033929 days.  I tried to install it automatically and manually.  Failed every time.  The last update, I've managed to install has been KB3035583 on 26/05/16.   It takes forever for my computer to start every day.  I'm at the end of my rope.  I need this computer for my business.

    I get the error code 80004005 is.

    I tried Microsoft Fixit.  I searched for help.  I'm not that know computers, so I do not understand a lot of what I read on this issue.  I need someone to tell me what to do and explain it is the way that a non computer fan can understand.

    Should I try #2 method the first engineer has suggested?

    -> Here that an engineer of MS has never been. Most of the respondents from these forums are voluntary (like me) Windows rather than MS employees community. They rarely use phrases that are designed to give you a feeling of warmth inside, but they try to help you solve your problem.

    I suspect that the #2 method won ' help you a lot, but it's worth a try.

    Method # 3 is always a good idea.

    If all else fails, then I can see these options for you:

    • See if another respondent has any bright ideas.
    • Restore the windows of an image that you have possibly set while the system was in perfect working condition.
    • Disable the automatic updates altogether. The risk of getting something wrong while you follow the rules 'Safe Hex'.
    • Perform a destructive factory restore.
  • Error code 800B010B during installation KB2446708

    I get error "error code 800B010B when installing KB2446708" when trying to apply the update of security for Microsoft .NET Framework 4 (KB2446708)

    Several attempts have failed.

    I have updated root certificates (see update root certificates [March 2011] (KB931125) http://www.microsoft.com/downloads/en/details.aspx?FamilyID=3a027078-4cd7-4b27-9837-3d7e58dd5a89) and revived the .net 4.0 update.

    Thanks to jwmerrick on http://social.msdn.microsoft.com/Forums/en-US/netfxsetup/thread/2107384c-e030-48d9-9e4d-02537bf3b755

  • Get the error code 0x80070005 during installation of streets & trips

    Original title: How can I get rid of the error 0x80070005 during installation of streets & trips

    can how I get rid of the error 0x80070005 during installation of streets & trips

    Hello

    Method 1: Perform the steps from the link.

    Error message when you install a Microsoft game or a mapping program 

    Method 2: If the problem persists, then you can contact support for Streets and Trips

    Support for MapPoint, streets & trips and Highway 

    Hope this information helps.

  • Error code: 207 during the instalation (update)

    Hello

    I have error while I tried to install the new update for CC error code is 207 (the server is not responding. Try Again later). I have this msg several times. Instalation process stopped at 5% each time. What to do next?

    Hello

    207 occurs when there is no response from the server (in case of timeout), intermittent errors HTTP or dead connections.

    Please, please visit the links below.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • 0X8004FF11 error code when I try to update Windows vista Home basic

    Windows does not start in normal mode, I need help.

    Hello

    -What changes have been made to your computer before the show?
    -Average only "Windows does not start in normal mode" your computer is in safe mode and not able to boot into normal mode?
    -What exactly are you trying to update in Windows Vista Home Basic?
    -Is this problem (error code) associated with any software (Microsoft Security Essentials)?

    Please provide us with more information on the issue:

    http://support.Microsoft.com/kb/555375

    If the problem is related to the Windows updates, see this article to fix the problem.

    Problems with installing updates

  • Error code: 80070057 (cannot install the update KB982519)

    Error message when updating a program 'recommended '.  Please... need help.

    Hi Big Fish 2.

    1. are you able to install other updates successfully?

    2. do you have security software installed on the computer?

    Method 1

    Download and run the system preparation tool and try to install the update.

    System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work.

    Description and the Windows Vista CheckSUR update for Windows Vista for x 64 systems
    http://support.Microsoft.com/kb/947821

    Method 2

    Download and install the update manually using the link below and check out them.

    Update of application compatibility for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: June 2010

    http://support.Microsoft.com/kb/982519

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Vista - Error code: 80070057 & dt000 (cannot install updates)

    I can't receive the updates and get these codes in an attempt to "WindowsUpdate_80070057" "WindowsUpdate_dt000"

    My computer is extremely (10 minutes literally) slow to start when it comes to network connections and Control Panel. I don't know if the issue of the update and the problem of start/network are connected.  After he finished finally start then run fins.  I ran programs to clean up the directory upward and taken on the start programs but does not help the problem.

    Note the (KBXXXXXX) KB number associated with the update that you are trying to install. Search the Web using the number as search criteria. Download the update file independent of"Microsoft" and install them manually.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Error code 0xc0000005 during installation of tax software

    I have Windows 7 and you are trying to install the software of tax HR, the pop-up with code 0xc0000005 error - me has failed to install the software?

    Is one knows how to fix?

    Anne Laure

    Anne Laure

    Your best bet is to contact the developer.  We have knowledge of MS products right here.

Maybe you are looking for