Error code: 80070424 when you try to use Microsoft Update
I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp
I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp
If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
Cleaning the components of update on your Windows XP computer
It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)
Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)
Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:
Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.
(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
How to reset the Windows Update components?
Reset.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )
You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312
You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.
You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.
You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.
You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)
Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/
JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/
Those who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.
Defragment
How to defragment your hard drives* will take time
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
Tags: Windows
Similar Questions
-
I also get the error code 80070005 when you try to use Windows Update to check for the updates
I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?
Hello
1. what Microsoft fixit did you run?
2. don't you make changes to the computer before the show?I suggest you try the steps from the following link:
Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.
-
Error code 8024001 when you try to use Windows update
Original title: all the answers to fix the error code 8024001 fail.
The answers to the difficulty of error code 8024001 fail. He typed in the command prompt:
net stop wuauservRen %systemroot%\SoftwareDistribution SoftwareDistribution.OLDnet start wuauservoutputaccidents of Microsoft 'Fix It', requiring to uninstall and reinstall.I could not update my updater in some time and more and more programs become problematic due to lack of updates. Many others have asked the same question, for some time now.BOO, HISS Microsoft! How about a real solution on the "Fix It" site!Hello
Were there any changes (hardware or software) to the computer before the show?
If you receive the Windows Update 8024001 error while trying to install updates, an update to Windows Update is installed. Depending on how many programs are running and the operating system files or folders are affected as this update is installed, it may take several minutes before you can install other updates for your computer. Try installing updates later.
If so to resolve this issue, rename the Spupdsvc.exe file, and then try again to install updates. To do this, follow these steps:
a: ClickStart, and then run.
b: Copythe following text,paste it in the run box and then click on OKor press on ENTRY:
Cmd /c %WinDir%\System32\Spupdsvc.exe Spupdsvc.old ren
c: try again to install updates. If you can't always install the updates.
Hope this information helps.
-
Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)
I've read other discussions on error code 80242FFF. Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit. Also, I started my computer in mode safetboot and tried to update.
They did not work. So, will you be able to help me find a solution?
Thank you
Ken
Hello
1. is that the copy of windows is enabled?
2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?
I suggest to perform the steps in the following article and check.
Method 1: run the Windows update troubleshooting tool and check.
The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/
Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.
To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below for more details:
How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.Method 3: If the problem persists, follow the steps in the following article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note:
un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ( )
How to back up and restore the registry in Windows
b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
For reference:
0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
http://support.Microsoft.com/kb/946414
Note:
un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ( )
-
Error number: 0 x 80070424 when you try to use windows update
When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.
Try other steps mentioned in the article
http://support.Microsoft.com/kb/2509997
`~`
http://support.Microsoft.com/kb/968002/>
`~`
If no joy, click the round to start, in the search in field type
cmd
Right-click on cmd.exe and select ' run as to administer. Follow the prompts to allow the command prompt to run.
At the prompt, type it below, and press ENTER after * each * command
regsvr32 c:\windows\system32\wuaueng.dll
output
Restart the system and see if it can be updated now.
04/27 / 1107:46: 36 am
-
Received error code: U44M1I216 when you try to install the updates
When you try to install the updates for my adobe products, I received the following message is displayed:
Photoshop Camera Raw 7.4
There was an error of installation of this update. Quit and try again later. Error code: U44M1I216
Update 6.0.5 extensions Manager
There was an error of installation of this update. Quit and try again later. Error code: U44M1I216
Adobe Photoshop 13.0.5
There was an error of installation of this update. Quit and try again later. Error code: U44M1I216
Appreciate any help and suggestions. Thank you.
Hi Jeff,
I had a whole series of mistakes differrent, but thought of the discuussions in http://forums.adobe.com/message/5273970#5273970 would be the resolution, but as you can see by my comment on this subject, that this still has not first solve my problem. I finally solved it by using this solutions all in contact with technical assistance, although I do not understand what we did different, he still was't straight forward and had several attempts to succeed. Still seems to be a problem Adobe must answer, especially with the new CC version and update to come Monday, I bet that there will be a lot of discussion of this problem the week next in the forums.
See you soon
-
Getting error code 80004005 When you try to install an update to windows 7
When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.
80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.
http://support.Microsoft.com/kb/929135
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
can someone help me solve the following problem please? Error code: 0x80070005 is what appears when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)
Is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/last-mse-scan-was-two-weeks-ago-is-ok-whereas-my/05eba51d-95f6-4a5d-b313-da0994e57543
-
I use Windows XP and get the error code 0 x 80070424 when you try to use Windows Update.
When I try to access Windows update, I get an error code 0 x 80070424. I've read many threads, but want to make sure that the solution is for Windows XP
Try this link
http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/
-
Get the error code 646 when you try to download the update of April 10
I am trying to install an update in April 10,2012 and the code646 of error appears and it let me download the update? What should I do?
Hello
1. what day you're talking about?
2. don't you make changes to the computer before the show?
Please follow the steps from the link below.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update
-
52D error code appears when you try to install windows updates
Error Code 52D and it will not install my update
Reset Windows Update components:
http://support.Microsoft.com/kb/971058Otherwise, go to the Download Center microsoft and download the manual to install the update package using the number of the update and install it on the computer.
-
Can someone tell me how to solve this problem?
Error code when you use Windows Update or Microsoft Update to install
updates: "0x737D" (30 December-09)
http://support.Microsoft.com/kb/978597 TaurArian [MVP] 2005-2010 - Update Services -
I get error code 80070666 when you try to install the updates.
Receive this error code now after Windows has INSISTED I need to install the latest service of Download Manager. Also the MSE will check is no longer for the updates because it signals a problem with internet connection! He has no problem with the connection. Get if amaze people on Mac computers when these problems with windows popping up constantly! I can't find a solution to this problem, and I will never buy a Windows OS again.
http://support.Microsoft.com/kb/971058
Try the procedure described in the above article, you can use Fixit, but I suggest that fix you it yourself.
Fix it yourself go to the section "Let me fixit myself ' and click on: «Click here to show or hide detailed information»
You could buy a Mac their OS is great just like Windows, but also a lot of problems.
I have an iPad and I am a member of the forums Apple take a look for yourself.
https://discussions.Apple.com/index.jspa
You don't have to join to read the messages, just scroll down to Mac Pro or click here:
https://discussions.Apple.com/community/desktop_computers/Mac_pro
Or choose another forum, you will be surprised.
I'm not trying to sell you on Windows just give you information:
I have a Dell Latitude Tablet, which is much higher than my iPad.
That I wouldn't trade for anything.
Please let us know if your question is or is not resolved.
-
Error code 800F0816 when you try to install the updates
Vista Home Premium Service Pack 2, 64-bit operating system. Downloaded and installed the latest updates of security, but 6 of them have failed to install which gives error code 800F0816. (specifically KB978338, 980232, 979683, 981332, 905866 and 978601). Unable to find much information about this error code at all. Can someone point me in the right direction please? Thank you JOCK McSQUIGGLE
Thanks for the pointers, but none of the Web pages on the links provided, mentions this error code, which I find strange it seems that the problem is caused by the presence of defined Windows Firewall on 'on' when you download updates. Turning the firewall Windows on a 'stop' in the control panel allows downloads to install correctly. Hope that other users may find this useful. JOCK McSQUIGGLE
-
Hello
Help, please! I automatically get the update above via Windows update, but every time I try to install it, it fails with the WindowsUpdate_00000D56 error code. I searched on through pages and pages or forums, but I do not understand the jargon. How can I get this update to install successfully?
Daniel
Hi Daniel,.
Could you please provide the full error message that you receive for a better understanding of the issue?
Step 1: Manually download the update from the link below and then try to install it
Save the update on the Office
Step 2: Disable security software, follow the steps mentioned below
Disable antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done
Now try to install the update that is saved on the desktop
Let me know if it works or you need help
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Network disconnects the Tecra M7 using Windows 7 RTM
I tested Windows 7 since the first versions beta and finally got my driver's license for RTM, but one thing still does not work on the Tecra M7: Network connectivity is lost repeatedly during the use of the ethernet adapter integrated Intel Pro/1000
-
HP pavilion 1107tu g4: repar
Update
-
Change of temp to celsius on the start screen
Using an Acer Iconia A1-810 and the display shows the time, date and the temp, but it shows the temp in 'C' and I want to "F". I can't find where the installation program is for it. ACCU Weather is OK but not this, probably a widget. I'm new to th
-
Originl title: Windows media player I get this message: Media player cannot find this file. It may have been moved or deleted. any ideas on how I can fix it myself? Microsoft Help player said diagnosis has no problem. I added an external hard dri
-
iMac can't find printer printer can find the router iMac can find the router