error code 80070490, installation disc, and company did the door is no longer this computer

Similar Questions

• Error code: 80070490 (Windows is unable to check the updates)

  I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

  Hello Pstrjohn,

  Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• Error code: 80070490, when you try to do the factory reset.

  Hi, my laptop is Dell Inspiron 15R SE and my window always freeze once I started my pc for a few minutes... the Task Manager and the window are freezing and he wouldn't recover more, I have to shut down the pc by now the power button as restart or shut down takes forever to fill.

  I did test of ePSA, and my pc is all green (extended test since)

  I don't know what to do so I decided just to do a factory reset for pc.

  But what happens is the window give me the error code: 80070490. And it does not allow me to do the factory reset.

  Annex: this image is the result of using my Dell system health check.  (Mcafee is always automatically disabled)

  

  And another is BlueScreen Troubleshooter

  

  
  

• Vista - Error code: 80070490 & 80240016 (cannot install updates)

  Windows Update error Code: 80070490,80240016

  OS: WIndows Vista Ultimate SP2

  I had this error on update during the installation of 4 important updates. KB967723, KB970430, KB2158563

  KB972145.

  1 leva code error

  It was suggested to repair windows. It did not work.

  2 downloaded Windows6. 0-KB947821-v10 - x 86

  Another suggestion was to download the file Windows6. 0-KB947821-v10 - x 86. This download crashes 3-way quarter through

  3. http://support.microsoft.com/kb/957307 follow the instructions. Still no.

  4. manually downloaded 947821

  Please try the manual download of 947821. It is common for it to
  seem to not do anything and I saw him take as one
  hour or two to complete.
   
  http://support.Microsoft.com/kb/947821
   
  Subsequently, thanks for posting the %systemroot%\Logs\CBS\CheckSUR.log to this
  thread.
   

  -Mike Burr

• Error code 80070490 while search/checking the Windows updates.

  IHaving tried to solve a recent problem that occurs with Windows Update (error Code 80070490) I read and try different things that have been suggested on this forum. It appears after trying the SFC, there are a few problems with the registry that cannot be resolved automatically. I tried the automatic Microsoft difficulty he 50202 but that does not solve it. I tried a system restore, but there is no restore point before the update I managed successfully to do (31 October 2009). So finally, I tried the repair facility that suggest the majority of people. I've had this laptop since February 2009, and Vista was preinstalled. I have the DVD of resettlement for Vista Home Premium 32 BIT and have not added anything about myself, but when I try to do the upgrade to install it says it is disabled and that he needs at least a current version or the more recent than the version I am running. I don't see how it can be less common because it is the version that I've been running for 9 months and the DVD that I was sent with the laptop. I am now on the ideas and suggestions...

  Fraser,
  Well restoring factory would correct any problems if they are strictly related to software.

  If you do a normal upgrade to Windows 7 and the problems you are currently experiencing are the question within the registry, then it is likely that they could remain after the upgrade.  Now, if you perform a Custom Installation upgrade press she will move to your current Windows directory to a new folder (Windows.old) and then it will install properly.  Of course, with this option, you will need to reinstall your applications.
  If you buy a copy of Windows 7 in another country just make sure that you get the correct language and that it is a valid copy.  (Also check the version of Windows.)  You shouldn't have any problems once you get back.  Here are some links with information about Windows 7 and upgrade considerations.

  I hope this helps.

  Windows 7 upgrade considerations

  Windows 7 Compatibility Center Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only one who uses this computer__

  I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only person who uses this computer

  What are the functions? More global changes (changes to the system, software installation) require an elevation in Vista/Windows 7.

  Changes to the built-in Vista administrator account

  http://support.Microsoft.com/default.aspx?kbid=942956

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  I hope this will help:

  Error 213:19 | Problem is the license for this product

• Tried to update the computer and got the error code 80070490

  I tried to download the update, and I get the error code 80070490.  I tried to download one that you people told me to download to see if it corrects the problem.  He did not, then I was told that I needed to reinstall Vista from disk, but I don't have the disc Vista came already in my computer.  Is there a link where I can download from you guys directly.  Help, please.

  Hello

  M ode 1.      

  You can try to install the updates to the clean boot, please visit the link mentioned to perform the clean boot below.

  http://support.Microsoft.com/kb/929135

  Method 2.

  See the city link below to download and install the system update readiness tool

  http://support.Microsoft.com/kb/947821

  Method.3

  Follow the link below city to run windows update

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also: http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

• Error code 80070490 during installation KB978342

  Original title: ERROR DOWN LOAD UPDATE

  I get the error code 80070490 after trying to install the update of KB978342 security, could help with this you problem? seems to down load all the other updates ok I have vista Home premium, service Pack 2, 32-bit

  Don't know what you're updating trying to install as I couldn't find it.

  With regard to your error.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the error code 80070490 during installation kb2588516

  change the title: I am unable to get kb2588516 to install on Vista Ultimate w / SP2, error code 80070490

  It's the only update of November 2011 does not install

  It worked for me

  http://support.Microsoft.com/kb/947821
  After you run this kb, I could install the "installable" update
  WB

• My computer stopped the update since October 23, 2010, and whenever I try to check for popular update, I get the number of error code 80070490. Help, please!

  My update of the computer window stopped updating since October 23, 2010 and each time I tried check the update popular I get the error code 80070490. Help, please!

  Hello

  questions have already been addressed here in my 1st reply:

  Please read the answer given

  Here is the solution for your problem of MS

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• HP 15-r033tx Notebook PC: get the 0xC0000005 error code during installation windows 8.1 x 64

  Please help me...

  I get error 0xC0000005 new installation code copy Windows 8.1 x 64

  When the installation process happens to 87% every time I get an error code saying that the installation is not possible.

  I can't install windows 8.1 x 64 version on my laptop.

  Please tell me how to fix and install windows 8.1 x 64 version on my laptop.

  I tried with dvd - rom and usb as well, but the result is the same... just stuck to 87%...can may not be installed...

  How to overcome it... Please...

  @Achintya only,

  Given that the material all past, and he could install another version of windows without problem, I suspect a problem with the 8.1 Windows installation disc x 64. IT may be a good idea to contact Microsoft about this.

  I did a little research and found this on the equivalent of Microsoft of this Council.

  Install Windows Pro 8.1 (detail) fails in step 2 with the error Code: 0xC0000005 -answers.microsoft.com

  There are a few suggestions on this post you can try.

  I hope this helps.

• The latest October security updates will not be installed. I get the error code 80070490. I tried several times without success

  I tried to download microsoft fix and re-install vista from the disc that came with my laptop but neither stage work (the re - install vista wouldn't let not me full and I received the message)
  ' upgreade cannot be started. Updated canecel installation level then chooose upgrade to a version of windows that is newer than the one you run '

  I use vista 32 bit

  Whenever I try to download new security updates I just get error code 80070490

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services