error code 800706BE for KB948465
In June 2009 I was invited by an automatic update on default update an 'important' Windows Vista Service Pack 2. It seems that there is an error 800706BE for this update faild. A few weeks later, there was an automatic update again for this SP2 but failed again. It is now September and after that this second failure updated, I was not invited automatically to update this. So I tried to do it manually by following the links in the history of the update. Somehow, I succumbed this update after several tests in contrast to other updates failed for other programs. If it is an 'important' update, why am I not being invited automatically update?
This is an important update. I don't know why you are not prompted at all times (but I wasn't either - I had to download and install it myself manually). You can download it from the Microsoft website at http://technet.microsoft.com/en-us/windows/dd262148.aspx. Even if you downloaded it before, download it again to ensure that the original download is not corrupted.
The error can be caused by many things. First disable any anti-virus program, you may have running. If this does not work, try to disable the UAC by going to start / Control Panel / user accounts / turn User Account Control on or off / then uncheck the box to turn it on, and then click OK.
If it still doesn't work then we will check your system files:
Go to start / Program Files / accessories / command prompt and right click on command prompt and click Run as administrator.
Type sfc/scannow (note the space - it is important) and to enter and leave running. It will scan some of your system files and try to repair (if you get from these errors, post here). Once done, repeat the installation.
If none of these work procedures, do not forget to restart your program anti-virus and re - enable UAC because you do not use your PC for long without their protection.
I hope this helps. After back if he did or didn't (and we will see if we can come up with another option to try).
Good luck!
Tags: Windows
Similar Questions
-
Will not install SP 1 for Windows Vista error code 800706BE.
I try to install Service Pack 1 for Windows Vista and it continues to fail with the error code 800706BE and then my security/antivirus software detects a trojan virus. What can I do? As I would like to download the trial version of Office 2010.
Just open the program (it may be possible from the notification area icon if you have an or there should be an entry in the menu start / all programs for the program) and most of the AV software that I have seen or used the option clearly identified on the main screen or another primary screen if there are tabs or on a toolbar or at worst a deep layer in the options bar menu. If there are options, clear all.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.
OPTION A:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
OPTION B:
You see the effects of a hijackware infection!
NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows. A repair install won't help!
Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/
Otherwise...
1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx
NB: Run the FULL scan, not analysis FAST! You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.
2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm
2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm
3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!
I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Good luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Error code: 800706BE (KB2434419 install stops at 50%)
Windows live essentials so far (2434419 KB)
error code; 800706BEHello Jean - yves leoage,
Thank you for your message. Please see this sticky: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/a507eaa9-3ff8-4162-9546-693760b1f602
See you soon
Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.
-
error code 80070673 for windows update for vista
error code 80070673 for windows update for vista
Hello Jwisetoyo,
Thank you for your message. Please click HERE for a possible solution to your problem.
See you soon
Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I get the error code 646 for KB2092914 on a Vista Home, I installed the 'Fix It' and he came without any problem but yet he will not yet installed this important security feature: can someone help me with this, it seems that I searched for hours! Thank you!
What FixIt do you mean?
Try this FixIt please:
http://support.Microsoft.com/kb/2258121
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I get an error code 0xD59 for the update of Service Pack KB2463332? Then he wants to resart my computer for an update failed? Why?
Hello
Click on the below mentioned link to manually install the update on your computer.
Microsoft SQL Server 2005 Express Edition Service Pack 4 for Windows XP.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=184After you install the update, restart your computer and check if the problem is resolved. -
get them error code 8024001 for two weeks now can't get rid of it
get error code 8024001 for two weeks now can't get rid of it, and then try again to saying
Hello
When exactly do you get the error message?
I suggest you try the steps from the following link:
Windows Update error 8024001
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024001b -
Error code 800706BE & code 6BE
I have microsoft system updates pending. When I try to download anything go by, Keep receiving error code: 800706BE & error code 6BE
Hi RobertBeyerback,
Follow the troubleshooting steps in this thread to solve the 800706BE error. Measures should also be applied to Vista. You can also find the links below useful:
Reset the Windows Update components
Cannot install some programs and updates
If you are unable to install the updates, please provide the following information:
- The full version of Windows you have installed
- KB # the update fails
- The troubleshooting steps you have tried
-
receiving error code 39 for dvd, driver will not load.
replace corrupt cdrom.sys
small management business of vista 32 bit. receive error code 39 for dvd. driver will not load. I tried to uninstall. same question on re - start.
I tried regedit suggestions. UpperFilter deleted, no lower filter exists.
In addition to the above on the excellent advice, cdrom.sys is not corrupt.
-
Error Code C800044E for Windows updates.
I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.
Hello
1. all the troubleshooting steps have followed so far?
2. the updates could not be installed?
3. what fixit did you run?
4 have have there been recent changes made on the computer before the show?
I suggest you to follow the steps mentioned below and check if it helps.
Method 1: Put the computer in a clean boot state and try to install the updates.
http://support.Microsoft.com/kb/929135
Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.
Try to download the update and install.
Download Center.
http://www.Microsoft.com/download/en/default.aspx
Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 3: How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Then try to reinstall updates.
I hope the information is useful!
-
error code 646 for the updates of Microsoft office
error code 646 for Microsoft office updates KB949710, KB951550, KB973593, KB950130, KB951944, KB973704, KB974561. Help, please
Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2
Read the info on the above link to error Code 646.
With the compliments of: David_O - Support Engineer
This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2
Method 1: Save the Windows Update files
1. click Start and type notepad in the box start the search .
2. click on Notepad in the programs list.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S1. in Notepad, on the file menu, click on record under.
2. in the list record under , click all files.
3. in the file name box, type register.bat.
4. save the Register.bat file to your desktop.
5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.
6. try to install the updates again.
Method 2: Download and install Windows Update agent
For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not help:
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include this error Code, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
Error 'Code 43' for AMD Radeon HD M 74000 after installing Windows 8
Original title: AMD Radeon HD M 74000
Error Code 43; After the installation of Windows 8
Hi Erwin,
We are pleased to know that you have chosen Windows 8 and thanks for asking this question about Microsoft Community.
According to the description, it seems that you get an error 'Code 43' for AMD Radeon HD M 74000 after installation of Windows 8. I'll be happy to help you with this problem.
Step 1: I see that AMD Radeon HD M 74000 is not compatible with the Windows 8 operating system.
Check out the link:
http://www.AMD.com/us/products/notebook/graphics/7000M/7400M/pages/Radeon-7400m.aspx#2
Step 2: As the 74000 M AMD Radeon HD driver is not compatible with the operating system Windows 8, I suggest to install the drivers in Windows 7 compatibility mode and check if the problem persists.
Follow the steps to install in compatibility mode:
a. right click the driver installation file and selectProperties and then tap or click on the compatibility tab.
b. check in the run this program in compatibility mode for: box.
c. tap or click the drop-down box and Select a previous operating system, and then press or clickOK.
d. try to install the driver and verify.For reference:
http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx
I hope this helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
-
Whenever I try to update the 6 CS Master Collection that I encounter the error Code: U43M1D207 for the following applications: Prelude CS6 1.0.2 updated; Adobe SpeedGrade CS6 6.0.4 update; and Adobe Audition CS6.
your download has been altered. You may need to use another connection.
Error in downloading, installing or updating Adobe Creative Cloud applications
-
I have the error Code: 2 for update my cloud and it won't let me uninstall it or anything
I have the error Code: 2 for update my cloud and it won't let me uninstall it or anything
Hi amanda,.
Please check the help below document:
https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html
Kind regards
Sheena
Maybe you are looking for
-
How to copy and paste into the search engine does not work?
How to copy and paste into the search engine does not work?
-
Satellite X 200-driver of wireless network card not moved
From one day to the other, my network card simply stopped working. I pulled to the top of my 200-20 t X and Vista told me that he had found the Intel AGN4965 unit that had to be installed. I agreed to let Vista search for the best drivers, but after
-
Microsoft Silverlight has been installed and I can't uninstall it.
Silverlight is annoying, because it lights up unexpectedly and she slows and crashes my computer. Have tried to uninstall several times and it does not have a resolution. What can I do?
-
Hello everyone, Is it possible to control the elements (graphic palette in the profile of the line) via the property node? Greetings zapfle
-
I want to install windows live messenger
Salam 3alaykom I want to install windows live messenger (the best)