Error code 800F0811 when you try to install service pack 2 for vista

Similar Questions

• I get error code 80042306 when you try to install Service Pack 1 for Vista Business

  Am linking to get my eccentric Vista to work properly. Try to get the notice of failure load and obtaining of the SP.

  alabamacoasty,

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  System File Checker

  The system update tool

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 8024200d when you try to install service pack 2 on vista 32-bit

  SP2 and run system update tool update always fails.

  Hello

  **********************************************
  Rename the folder Catroot2 rename the Catroot2 folder (Windows XP and Windows Server 2003 only) and then try to install the program again.

  Note Skip this method if the operating system is Windows 2000.

  To rename the Catroot2 folder, follow these steps:

  1. Click Start , click run , type cmd, and then click OK .
  2. At the command prompt, type the following commands and press ENTER after each line:
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  3. Remove all tmp*.cat to the following folder:
     % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

     If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  ***********************************************
  Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 /u softpub.dll
     regsvr32 /u wintrust.dll
     regsvr32 /u initpki.dll
     regsvr32 /u dssenh.dll
     regsvr32 /u rsaenh.dll
     regsvr32 /u gpkcsp.dll
     regsvr32 /u sccbase.dll
     regsvr32 /u slbcsp.dll
     regsvr32 /u mssip32.dll
     regsvr32 /u cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  3. Restart your computer.
  4. Click Start , click run , type cmd in the Open box, and then click OK .
  5. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 softpub.dll
     regsvr32 wintrust.dll
     regsvr32 initpki.dll
     regsvr32 dssenh.dll
     regsvr32 rsaenh.dll
     regsvr32 gpkcsp.dll
     regsvr32 sccbase.dll
     regsvr32 slbcsp.dll
     regsvr32 mssip32.dll
     regsvr32 cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
     Restart the computer.

  ***********************************************
  Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands, pressing ENTER after each line:
     attrib s h % windir %
     attrib s h %windir%\system32
     attrib s h %windir%\system32\catroot2
     output

  ***********************************************
  Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

  To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

  1. Remove all tmp*.cat of the following folders:

     systemroot \system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

     systemroot \system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  2. Delete all the kb*.cat files in the following folders:
     % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
  3. Remove all the oem *. * files in the % systemroot % \inf folder.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  5. Restart the installation of the patch failed or the installation of the service pack.

  ***********************************************
  Empty the software distribution folder

  1. Click Start , click run , type services.msc and click OK .

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.msc and then click run as administrator .

  2. In the Services (Local) pane, click automatic updates , and then click stop .
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. In this place, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates , and then click Start .
  7. Restart the computer, and then run Windows Update again.

  ***********************************************

  It may be useful

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• I get error Code 80070002 when I try to install Service Pack 1.

  Vista will not be updated to the Service Pack 1 or 2

  I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

  Hi kimber222,

  If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

  Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

  Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

  Fill out the next step for the InPlace upgrade:

  1. Close all open applications.
  2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
  3. In the windows installation program, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exein the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yesto accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error code@80073aa2 when I try to install service pack 2. all the so certificate errors when I try to down load any anti-virus program

  error 80073aa2

  If there is no anti-virus installed on your computer, it is likely infected. You need to clean it up before you can install an antivirus and certainly you don't want to try to install a Service Pack on an infected computer.

  You need to clean it up first.
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• error code 8000FFFF when you try to install updates from windows update.

  error code 8000FFFF when you try to install updates from windows update.

  Lonnie,

  8000FFFF error code when you click on "check for updates" in the item of control panel of windows on a windows update computer vista http://support.microsoft.com/kb/946414

• Getting error code 80004005 When you try to install an update to windows 7

  When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.

  80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Received error code: U44M1I216 when you try to install the updates

  When you try to install the updates for my adobe products, I received the following message is displayed:

  Photoshop Camera Raw 7.4

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Update 6.0.5 extensions Manager

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Adobe Photoshop 13.0.5

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  Appreciate any help and suggestions.  Thank you.
  

  Hi Jeff,

  I had a whole series of mistakes differrent, but thought of the discuussions in http://forums.adobe.com/message/5273970#5273970 would be the resolution, but as you can see by my comment on this subject, that this still has not first solve my problem. I finally solved it by using this solutions all in contact with technical assistance, although I do not understand what we did different, he still was't straight forward and had several attempts to succeed. Still seems to be a problem Adobe must answer, especially with the new CC version and update to come Monday, I bet that there will be a lot of discussion of this problem the week next in the forums.

  See you soon

• error code 66A when you try to install update MS10-077

  I can't install this update... tried several times.

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

• 80070057 error code when you try to install Service Pack 1

  I try to install Vista Service Pack 1 and when I try to install it either online or manually by downloading the entire 400 + M file, it will start and show 10 minutes later the installation failed with code 80070057 error and.  I can't find this code on a Microsoft Web site reference.  Any idea what's going on?

  Thank you

  A long shot, but try it (even if it's for Windows Server 2008). Stop mentioned serivce and run Service Pack 1 Setup.

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• 52D error code appears when you try to install windows updates

  Error Code 52D and it will not install my update

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058

  Otherwise, go to the Download Center microsoft and download the manual to install the update package using the number of the update and install it on the computer.