Error code: 8024200d on Windows Vista SP2 update (6 fails)

Similar Questions

• Windows vista SP2 update failed twice

  error code 800F0816 - when the vista sp2 update is completed and the facilities, it goes in a restart, windows does not load and I get the error code after crossing the repair mode

  The error is related with component maintenance (EC).
  According to this list of common CBS errors:

  800F0816 - express package was not completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).
  There is no action required on your part, wait for the express package is downloaded.

  Alternatively, you can:

  (1) post this question on the forum Vista and Windows Server 2008 Service Pack 2 .
  2) Contact Ms. for * support for free * to get SP2 installed.
  (3) to download the full package standalone SP2, Save and then read this prior to installation:
  Learn how to install Windows Vista Service Pack 2 (SP2)

  All the foregoing does not mention it, suggests strongly that you be completely and totally turn off the installed
  Suite antivirus/security surveillance system or even uninstall it before you attempt the installation of SP2.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Error code: 80073712 when installing vista SP2 by using windows update.

  Original title: Windows Update error code

  I get an error code 80073712 when installing vista SP2 with windows update, how to fix this?

  Hi Mike,.

  You can try the steps in the following article and try to install the stand-alone package for Windows Vista SP2.

  Error code 0 x 80073712 when you use Windows Update or Microsoft Update to install updates

  For more information, you can also consult the following articles:

  Windows Update error 80073712

  Learn how to install Windows Vista Service Pack 2 (SP2)

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• get error code 80072efe when windows tries to update

  I keep gettig error code 80072efe when windows tries to update can't seem to know what means this code anyone can help

  Hello

  When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive this error code.

  I suggest that you follow these steps/methods of the article below and check if the problem persists.

  http://support.Microsoft.com/kb/836941

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• KB2532531 of security for Windows Vista Sp2 update

  Windows update keeps trying to install security update KB2532531 for Windows Vista Sp2, but installation is never complete and the changes are returned.

  The automatic update becomes irritating as it regularly tries to force the reboot of my machine as part of the configuration (and back) changes (without success), in addition to try whenever I have stop manually.

  Issues related to the:
  What article (s) do I need download and install first to successfully install KB2532531 (apparently it is a pre-requisite for Windows 7)?
  Where can I download and install these items?

  I use Windows vista Service Pack 2, 32-bit version on a HP Pavilion dv5 notebook PC.
  Thanks in advance

  Hello

  Follow these steps and check if that helps.

  Step 1:

  I suggest to run the software on your system boot, then try again to install the update and check if it installs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Step 2:

  Download the update (KB2532531) for Windows Vista from the link:

  Update security for Windows Vista (KB2532531)

  http://www.Microsoft.com/download/en/details.aspx?ID=26749

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Using Windows Vista SP2 (32 bit), failed to install IIS

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!
  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!
  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!

  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!

  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  I have only a limited understanding of IIS and ASP.net.

  1. What are they? IIS 5, 6, 7.0?
  2. make sure that your version of Vista can support.
  Go to programs and features > column to the left, turn Windows has on or off > scrolling Internet Information Service > expand (+) sign and make sure if its level of compatibility under Web management tools. Home Premium can go as far as IIS6. > Make sure check marks are on the elements you need to install IIS.

  3. from what I understand, the version of Vista Ultimate and superior is required to install IIS 7.

  This is as far as I know.

  To install IIS 7, here is a tutorial:
  http://learn.IIS.NET/page.aspx/28/installing-IIS-7-on-Windows-Vista-and-Windows-7/

  Your question needed IT expertise. I suggest that transfer you to one of these support ASP.NET forums.
  Here's one of them: http://forums.asp.net/

• Error code 57 on Windows Vista update

  I used update of Windows Vista to install "needed updates", but he stopped with a big stop sign RED with an 'X' in it and said:

  ERROR
  SOME UPDATES HAVE NOT BEEN INSTALLED.
  FAILED: 1 UPDATE
  CODE 57: WINDOWS HAS ENCOUNTERED AN UNKNOWN ERROR

  It's typical and tedious to Microsoft.  I am flooded with requests to update my computer to IE8, but when I try to download and run IE8 (with or without the special pack MSN) I got error message saying:

  INTERNET EXPLORER 8 CANNOT BE INSTALLED ON YOUR COMPUTER
  IT YOU ARE MISSING SOME UPDATES. PLEASE UPDATE AND TRY AGAIN

  And of course I can't update so I can't IE8 - DAMN these situations of Catch 22 that Microsoft continually puts me in.  I think they must have scientists working on the theory of how long it takes someone to become completely crazy frustration so that they could make a statistical presentation of the scientific community as a breakthrough on stress or something LOL.

  What I need is someone to tell me what him Hey to do this so that I can get out of this endless loop, download the update reprisé (I think that it is Service Pack 1 - real service... not!) and be able to get FINALLY IE8 on my computer.

  You would think after having spent HUNDREDS OF dollars on a new and improved Windows OS it could be at least a semblance of quality but you know what, Microsoft does not even allow one free phone call - well I wouldn't stand behind this kind of work if I created such a poor quality product that every 2 seconds should be updated and then for some reason he can't.

  But * sigh * we are all indebted to Goliath and I am not David so I can't kill the giant, I'll have to try to work with em and see if I get a help at all.

  Oh, LORD, I pray that I get help within 48 hours of sending this (08/01/2010).

  Hi BobVictory,

  The only way was to take the advice of others here, and then we had to also remove all the data, we wanted to record on a secure hard drive, write and find all programs, reformat the whole, perform all updates of Windows, reseating all programs (MS Office, 3DO, Adobe, etc...) and recover data from the hard drive secure.

  I still run Windows Vista Ultimate Pro and not passed to Windows 7, but I just saw that Windows 8 is out, so what's the point? I'll probably wait for Windows 9 or 10 before the upgrade, because they seem to change every year and now my Vista running great, until I update each. Hope you find the same resolution for your computer.

  :-)

• Windows Update error code 80070005 in windows vista

  Original title: error code 80070005

  I have problems with the last batch of updates - I get a code error 80070005.  Please help if you can.  Mark

  Hello

  1 did you change on your computer before this problem?

  Error code 80070005 means generally that you're not quite allowed to install updates.

  All first please confirm that you have logged on to an account with administrative privileges.

  You can follow the methods below and see if it works very well.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 3

  You can follow the steps in the article below.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

• Error code 646 for Windows Vista

  When I try to install these updates, I get an error code 646.  I have a laptop Dell Inspiron 1501 with Windows Vista.

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Download size: 2.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Office Visio Viewer 2007 could allow arbitrary code to run when a malicious web page that is updated it is open. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/973709

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB972581)

  Download size: 1.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A 2007 Microsoft Office System security vulnerability could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves the vulnerability so that the 2007 Microsoft Office System documents are managed appropriately.

  More information:
  http://support.Microsoft.com/kb/972581

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB974234)

  Download size: 525 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update resolves a problem that can cause programs that use Outlook view with Forms 2.0 control, such as Microsoft Office Outlook with Business Contact Manager, stop functioning as expected after installation of update of security for Microsoft Office Outlook 2007 (KB972363).

  More information:
  http://support.Microsoft.com/kb/974234

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  OK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.

  Here are the steps that I took... which I think should work:

  (1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

• Error code 646 with windows vista Ultimate edition (KB973593) (KB973704) (KB975960) (KB974561)

  Hello, windows on my computer trying to install the latest updates but I get the error code 646 and FAILURE
  I use windows vista ultimate.

  Update of security for Microsoft Office Excel 2007 (KB973593)

  Update of security for Microsoft Office 2007 System (KB973704)

  Update for the junk e-mail in Outlook 2007 (KB975960) filter

  Update for Microsoft Office Word 2007 (KB974561)

  Try to manually download the Office updates and install:
  For example: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB973593&displaylang=en&stype=s_basic

  You can search each and every one of them on the link above by entering the number I did in the example.

  TaurArian [MVP] 2005-2010 - Update Services

• Error 80004005 by installing Windows Vista sp2 x 64

  I tried to install this updated 4 x I read an answer in this forum which is similar to my problem and I tried the solution, but it would not install.
  I noticed something this last time because I saw the installation process. We all know that the system can reboot several times during the installation. During the 3rd part of the installation, the user account screen asking for the password. However, I had no time to type the password in it, because it jumps to a screen saying that the computer is to install the updates. Then, when the updates for the 3rd party are finished 100% it is said that they can not be installed. Then the computer uninstalls them and puts the computer in its preinstallation State. Is it possible, because I didn't have a chance to enter my password, the computer refuses to recognize me as the administrater during the last part of the installation.  Therefore, maybe stop the installation process of the necessary changes and it returns to the previous state. I'm probably grasp at straws here, because I have never had a problem like this before. Does anyone know what I need to do to remedy the situation?
  I don't know if it's important but I installed another update after the 3rd time. The update has been successfully installed and working. So I thought that everything was ok and tried to install sp2 again. It's the same thing. Why can I install other updates, but not as an individual? Other than this problem installing, the computer works pretty well. I didn't notice a slow or something else for the past two weeks. I'm puzzled.

  I have an (office) Packard Bell imedia x 5705 Intel Core 2 Quad 4 x 1 GB (RAM) 2.33 GHz
  1000 gigabit hard drive
  Type system in Windows Vista Home Premium 64-bit
  Graphics card: NVIDIA GeForce GT130

  This computer is connected to 2 other computers with a D - Link KVM Switch. One of the other computers has a 32-bit system Intel dual core Vista sp2 running without any problem. They also share a router for internet access broadband.

  Should I try to reuse the recovery disk? I don't want to make things worse.

  Thank you, Debbie - the technical support for all your help.
  I went through all the steps mentioned above in the correct order. However, they have not corrected the problem.
  I used the Packard Bell Recovery Management options and restore my computer to its original state. Then I installed all necessary updates including sp2. I was not activate the preinstalled anti-virus software, or change programs or settings up to that later. That's the good thing. Packard Bell Recovery Management also creates a separate file for all personal files. Thus, when the computer has been reset, I still had my personal files.

• Error code 646 for Windows Microsoft Office Update.

  I have Microsoft Office 2007, and for weeks now Windows Update is not able to update the necessary updates. Error code 646 appears after updates fail, but all of the other Windows updates work very well but these Microsoft Office simply don't work and it happened for weeks. I searched for answers, but all lead to dead ends. Help!

  BROWNEY,

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  Let us know if this helped

• network Realtek 8900 8968/8111 adapter gives me an error code 10 in windows vista 64-bit

  I just reinstall a new copy of windows vista 64-bit on my laptop after 3 monts of waiting to get my hard drive. After installing windows (is there NOTHING else on the hard drive) is an error that says, basically, that the adapter will not start. I have uninstalled the driver and tried to upgrade to the latest version of the software and it doesn't help, either. It is a Pavilion dv7, moreover, and I went to the hp site. Thay no longer even support this model of laptop.

  Hello Christopher Lewandowski,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with the network adapter not starting not not by error code 10.

  Proceed as from the link below and check.

  Network adapter problems

  Meet us if you encounter problems with the NIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.