Error code 80242016

Similar Questions

• Error code 80242016 on updates-

  Running Vista SP1 on a Dell Studio 64 bit.  Whenever I try to install updates for Windows, I encountered problems.
  I tried the solution that I found in the forums (running Mr Fixit, then run system update tool) - if I run these, next updates seem to work currently running.  When I try to make the next round of updates, I met the same problem - which is the error code 80242016.  There is enough free space on the disk, does not cancel, etc.
  I tried to install SP2 2 months ago and have not as well.

  Should I run these specialized programs before I run updates?  That's happened since I bought the machine in February... too late to go back, but my patience is exhausted.

  Main issue - it would be logical for me to upgrade to Windows 7 at this point?

  Thanks for any help you can give me - I don't have much hair left to pull out!

  OMG... I disabled the option "Prevent unauthorized changes" as a result of Trend Micro, tried new updates and they were all successful.

  THANK YOU very much for your comments - he made me watch the Security Suite and find the option that I was the cause of the problem.  I've dealt with this for months and this seems to be the answer to this problem.

• KB2952664 fails in windows update, error code 80242016

  October 14, 2014 Windows updates had 15 recommended Important updates including KB2952664.  WU appeared to run correctly, but when you restart found 14 updates installed successfully and KB2952664 failed with the error code 80242016 (usually means that another installation is run - WU was the only application running).  I have reviewed historical WU and noted that this same KB has been updated 15/08/2014.  Reopened WU and returned played Check for Updates with nothing.  Because it was already installed, should I reinstall the KB, since it is not or there is nothing to worry?  Thanks for the help.

  Problem solved: 15/10/2014.

  Line at the bottom is that a previous version of this KB is probably already installed on your machine Win7 and if you want to update to the new version, you have to let fail, then uninstall, reboot, run WU check updates and reinstall the KB.  The alternative is to uninstall the last version - it only one - and remove the maintenance package KB.  This KB update facilitates the process of upgrading to later versions of Windows, and there will probably be additional versions in the future.

  I hope this helps and a big thank you to all those responding on two poles.

  I had the same problem installing updates on a Windows 7 Home Premium platform. All other updates have shown that it is installed successfully, with the exception of KB2952664. Another post on this subject, a fix was given to which I did successfully.

  Panel\Programs control & Features\View updates installed (selection of left column), right click on KB2952664, select uninstall, close Control Panel. Return to Windows Update and look for the updates. KB2952664 is displayed, run the update in my case, it is then installed successfully.

• error code 31 and the error code 80242016 put up-to-date

  Keep this errors need help please... I am desperate.

  yoradine,

  In addition to displaying the information requested here; (what to post in the Windows Update forum) Try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Error 80242016

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80242016 Windows Update.

  I downloaded the update of security for internet explorer 9 for windows vista KB2964358 he downloaded 4 times successfully, and then I got another warning on another update when I downloaded it it doesn't have the number of error 80242016 I would add that it caused the Bureau to not start after each of the downloads and I have to reboot the pc by turning off the coast to the Tower then for this a system restore ideas please

  you say that downloaded the update 4 times... She's supposed to be downloaded 1 times and installed once

  try to remove and reinstall again

  Open windows update > installed updates (in the left pane) > KB2964358

  Uninstall and reinstall it again

  Try the windows system preparation tool from the correct update errors

  Vista 64

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  Vista 32

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  try to perform the system restore

  Start menu > system restore > select a point of restoration with a date when your PC used to perform good

  .............................

  try to load the last known configuration

  Restart your computer

  After disappearing from the screen of the BIOS press several times F8, and then select (load last known good configuration)

  If it does not then start windows normally

• Need help resolution Windows 7 update error code 80242016 for update KB3185330 * IMPORTANT UPDATE

  I installed 5 updates to windows that have been brought to my attention.  4 5 updates were installed successfully.  But 1 updates that is marked "Important" CANNOT install.  The update is "KB3185330", it says it's an update to "October 2016 cumulative monthly security for Windows 7 x 64 based systems quality".  Can someone please help me to rectify this & this update installed successfully.  I never had problems before installing an update 'important '.  I am very concerned because I'm not a person tech savy, but I guess that if the update said '' significant '' than he SHOULD CERTAINLY be installed.  I kept all of my updates of Windows 7 since I got my computer.  I did NOT any changes to my computer before trying to update & as I said before, 4 other updates have been "successful".  I would appreciate the help of anyone who is well informed about it and can give me EASY instructions on what went wrong AND how to fix it.  Thank you in advance.

  Hello

  To address your concerns about the error message the update is not applicable to your computer , you can visit this link and follow the steps carefully.

  Let us know how it goes.

• Get error codes: 80246002 / 80242016 / while 80004004 trying to install Windows updates

  Original title: help Pleasee! Updates. ERROR CODES: 80246002 / 80242016 / 80004004. Important. __

  Here's the problem: Internet explorer 8 for windows Vista error code: 80246002 / updates of security for windows (KB938464) (KB952709) (KB951376) error code: 80242016 and security update for windows Vista (KB954459) error code: 80004004. They are all important and I can't find help anywhere. Can someone help me solve this problem? I go to the website listed in detail and can't guess what no problem help. What good is supported if they do not?

  Hi RhondaJean,
   
  I suggest that you put your computer in a clean boot State and then install the updates that are mentioned. The issue could be related to a third party software conflict causing the issue (error codes) to occur. Clean boot helps eliminate conflicts of third party software.
   
  Note: Follow step 7 to your computer as usual.
  KB that you can download and install
  KB938464
  KB952709
  KB951376
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Vista updates fail - error - 800F0816, 80242016 codes

  Currently have 11 major updates that fail to install and 29 in option. I tried to install update 1 at a time, reboot the PC and the system then crosses recovery of Windows startup. I installed the latest version of Windows Update, I renamed directories distribution Catroot2 and software. I tried to install SP1 and the system response with SP1 already installed, I tried to install SP2 system responds with SP1 must be installed. Any help, conventional wisdom greatly

  Alan,
  You execute all stages of this link as Halima provided: http://support.microsoft.com/kb/947366
  Specifically have you tried 3 and 4 of the resolution?  If this isn't the case, then try them.
  If so, then try this:
  Disconnect all external devices (except keyboard and mouse)
  Perform a clean boot , and then download the stand-alone SP1 (which looks like you already have it).
  Disconnect from the internet, and then try to install SP1.

  If this still fails, check the error code and after that you have achieved.  You can also consider the possibility that you have a virus\malware infection.  Take a look at these links.

  Get rid of malware

  Can I clean an already infected computer?

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot load Windows 7 after installation of 2 critical updates (KB2436673 & KB2296199) - 0x800f0816 error Code

  At 03:00 today, my computer automatically up-to-date with 8 updated reviews.  The computer unused satellite, power, up to 15:00 when I got home, date on which windows was trying to 'fix', because windows could not be loaded.  I did a system restore to a point before the updates were installed (02:00).  Goodbye My observer of events and concluding that none of the updates have been installed correctly, I have taken note of the errors for each (most were 0x800f0816, but we've been 0 x 80242016) and went through each update individually and install.  Two of these updates will not be installed.  After the system restart after installing, windows attempts to load.  The system automatically restarts and begins to repair windows.  Windows repair indicates that the system cannot be repaired automatically.  I chose a restore point from before the 'bad' updates are installed, and everything is fine.

  I get the same error for the two KB2296199 of KB2436673 & failed installs: 0x800f0816.

  Is it possible to fix this?  Or I'm just not going to install it these updates?  It is a newly built computer (last week), all the new kit stripped of equipment, new OS.  I have very little installed on this system.  I found no information regarding this error code or the latest MS updates online, or if anyone else has similar problems.

  Any response would be appreciated.  Thank you!

  J.

  Of course, if you cannot start the computer, uninstall the updates would be moot & system restore (or 'last good' known) would be your only recourse.

  Again, see http://www.microsoft.com/security/pypc.aspx

  Welcome & thank you for your comments. Happy Chrismakwannukah!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• What is the error Code (-18)

  iPhone 6 sec more

  iOS 10.0.1

  Get an error code (-18) what this code means?

  Some parts of the phone have been replaced lately?

  What's your iTunes updated to the latest version?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

  MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

  No RAM - 4SNS is a sensor error.