error code 80246005

I can't reinstall new update

Hello Dark Knight Mmd,

Thank you for using the Microsoft answers Forums.

Windows Update error 80246005

If Windows Update, error 80246005 during updates, it usually means you can't save files to the Catroot2 folder or that the Cryptographic Service is not started or is not working properly. Follow the steps below to correct these problems.

To allow files to be saved in the Catroot2 folder

Windows Update may fail if Windows cannot copy files to the Catroot2 folder or replace files that are in that folder (for example, if the folder or its files are set to read-only). To change the folder so you can Θcrire to it, follow these steps:

  1. Click the button start .

  2. In the search box, type command prompt.

  3. In the list of results, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. At the command prompt, Type attrib h s - r c:\windows\system32\catroot2 (where c:\ is the drive where Windows is installed), and then press ENTER.

  5. Then type attrib s - r c:\windows\system32\catroot2\*.* h (where c:\ is the drive where Windows is installed), and then press ENTER.

  6. Type Exit and press ENTER to close the command prompt window.

To check, and then restart the Cryptographic Service

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. In the Services dialog box, click Windows Update (you might need to scroll down to find it; the entries are in alphabetical order).

  4. Note the selection state (the status appears in the third column). Right-click Windows Update and do one of the following:

    • If Start is available, click Start.

    • If the restart is available, click on restart.

  5. Now click Cryptographic Services (you may need to scroll up to find).

  6. Note the selection state (the status appears in the third column). Click Cryptographic Services and do one of the following:

    • If Start is available, click Start.

    • If the restart is available, click on restart.

  7. Close the Services dialog box.

After trying either of these procedures, see the Windows Update Web site and try checking for updates again.

That should solve the problem.

Thank you.

UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

Tags: Windows

Similar Questions

  • 8007065E error code, error code 80246005 & error code 80073712 all read "Windows update has encountered an unknown error.

    Why do I get these error codes when my computer tries to update.  My operating system is Windows Vista.

    Can you help me please?  Thank you

    http://support.Microsoft.com/kb/971058

    How to reset the Windows Update components?

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.Microsoft.com/downloads/en/default.aspx

    Also, try to put the KB numbers in the search at the above link > then download them manually.

    If the above does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • (Redirected) Error code 80246005

    Problem with driver for wireless network connection adapter

    Best of this post in the Forum Networking, Internet, wireless, here:

    http://en.community.Dell.com/forums/3324.aspx

    Bev.

  • 1 1 Windows Update 80070002 error code

    1. 1 Windows Update 80070002 error code
    2. 2 Windows Update error 80072efd
    3. 3 Windows Update, error 8024402C
    4. 4 Windows Update 80070103 error code
    5. 5 Windows Update error 80070643
    6. 6 problems with installing updates
    7. Update Windows 7 error 80072f8f
    8. 8 Windows Update error 80246007
    9. 9 error code Windows Update 80070422, 80244019, or 8DDD0018
    10. 10 Windows Update error 80070003
    11. Windows Update error 80072ee2 11
    12. 12 error code Windows Update 8024001
    13. 13 Windows Update error 80200010
    14. 14 Windows Update error 80246005
    15. 15 Windows Update error 80246008
    16. 16 Windows Update error 800f020b
    17. Windows Update error 800f0826 17
    18. 18 Windows Update error 80244022

    Hello

    1 did you do any hardware changes or software on your computer before this issue?

    2. Since when you are facing this problem?

    I suggest to try the steps mentioned in the link below and check if it can help

    Method 1: Try to perform the clean boot and then try to update and check if it helps, here is the link:

    http://support.Microsoft.com/kb/929135

    Make sure that return you the computer to a normal startup mode once it's done.

    Method 2: Try to reset components to update Windows from the following link: http://support.microsoft.com/kb/971058

    Method 3: Also I suggest you to install the update from the link system tool below http://support.microsoft.com/kb/947821

    More information: Try following the steps in the link below

    http://support.Microsoft.com/kb/836941

    Hope this information is useful.

  • error code - 50

    I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

    Error code - 50 on iPhone

  • I keep getting an error code (-1) cannot restore iphone message what can I do?

    My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

    Try to restore 2 times more. If get the same error message

    take the iPhone at the Apple store nearest for a free evaluation.

    Once the diagnosis is complete, staff will explain your options.

    -1 is the hardware failure error code. Assuming that no damage to the

    your iPhone is not jailbroken, you may qualify for a reduction

    the price of the replacement warranty.

    Make a Genius Bar reservation to avoid delays.

    http://www.Apple.com/retail/Geniusbar/

  • What is the error Code (-18)

    iPhone 6 sec more

    iOS 10.0.1

    Get an error code (-18) what this code means?

    Some parts of the phone have been replaced lately?

    What's your iTunes updated to the latest version?

  • I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

    The operation cannot be performed because one or more required items be found.

    (Error code - 43)

    I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

    I'm using an iMac with OS X El Capitan 10.11.6 operating system

    Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

  • Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

    AHT error code.

    You have problems? Why do you run Apple hardware *?

    Of

    http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

    which would indicate a bad sensor on one of your memory modules or riser:

    In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

    Then check the second letter from the list below to see which component it refers to:

    A: ambient air sensor
    B: battery
    C: Central processors (CPU)
    D: DC (direct current)
    e: PCI-express slot
    F: FireWire port
    G: graphics processor (GPU)
    H: drive
    h: heat pipe (heat sink)
    L: liquid crystal display
    M: memory or the memory riser cards

    I would first install a monitoring app like Mac Fan Control of temperature

    http://www.CrystalIDEA.com/Macs-fan-control

    to see of you can find a bad sensor by reading the memory riser card.

    You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

    Since this is the Mac Pro desktop forum

  • 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

    MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

    No RAM - 4SNS is a sensor error.

  • Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

    Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

    Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

    All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • Error code: sec_error_ocsp_unauthorized_request

    I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

    An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
   Please contact the website owners to inform them of this problem.

    You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

    I tried to clear all - cache, cookies, history, blah blah blah

    I am so bored of you people cost me more time.

    It's fine in IE and Chrome.

    If I didn't need Firebug, I would switch to Chrome right now.

    edited because of the language according to the rules-forum-guidelines

    You're right, it is not sensible.

    Never made an exception for the site.

    FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

    Thank you for the help, sorry for the earlier rant.

  • 4005 and 4013 error codes

    Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

    Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

  • Suddenly MSEssentials 0x800703eb error code is after the recent installation of firefox 4. Any connection possible? no other recent activity or facilities

    MS Security essentials is coming with "your pc could not be analyzed" error code 0x800703eb. This occurs the day after the installation of Firefox 41 with no other facilities important program or activity for some time. We had no other software security for several years, which doesn't seem like a cause as possible. Any ideas or suggestions? Others noticed and reported similar problems?

    Thanks for any help
    Hans

    Hello

    So far, 41 Firefox installation is clean. Because your question is related to Microsoft here certain Threads are related to your problem. At the same time you can contact Microsoft Support

    I hope this helps.

    Thank you!

  • Error code: How can I get an item in the Recycle Bin?

    I can't put a webarchive into the trash.  Error message says, "the operation cannot be completed because one or more required elements was not found (error code - 43) how can I get the item in the Recycle Bin?

    reset

    then try again.

Maybe you are looking for