Error code C 355 downloading update

While downloading an update "windows internet explorer 9 for windows vista" I get error C 355 code

Hi chris james b.
 
-Can you download and install other updates without any problems?
 
Check the prerequisites to install Internet Explorer 9 first, and then install Internet Explorer 9.
 
Here are some articles that might help you to do the same thing:
 

Tags: Windows

Similar Questions

  • I get the error code 8007005 when downloading updated 951847

    I get the error code 8007005 when downloading update 951847. It produces about 60-70% of fact. I tried a few times and still nothing. I have an Acer Aspire M5620 running Windows Vista hope first Edition, SP1. I use the automatic updates. I tried following the instructions on changing permissions, but I do not have the same path as in the answers here. He said that this is an important security update. Any help appreciated.
    I tried to use Mr. FixIt and he could not run the error code giving 2838

    Hello Redbiker_co,

    Method 1: -.
    Please download Windows Installer CleanUp utility from the link, below
    http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    After installation, run the tools by clicking Start--> Programs--> Windows Clean up.
    On the inside of the window, you will see different installed versions of the .NET Framework. You should choose & Remove only that versions of the .NET Framework, that fails to deploy every time-for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

    Then, restart your computer and manually install the following updates in the order
    (1) package Microsoft .NET Framework 3.5 from the link below:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

    (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

    (3) now, download the KB951847 patch manually.

    Method 2: -.
    Error code: 8007005 means of problems with permissions. Please perform the procedure below

    Run cmd.exe with administrative previlliges (right click on this file as an administrator)
    and type: secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

    Now restart your computer & try to visit the Web site updated Microsoft or try to download the file manually from the link below

    If no help verify the steps using the link below
    http://update.Microsoft.com/microsoftupdate/v6/showarticle.aspx?articleid=13&ln=en

    [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

    --

  • error code C050004 when downloading updates.

    Hi all
    I'm using inspiron 1525 with ram 2 gb hard drive 160 GB running on Windows vista. while I'm down loading updates error code comes from April which is C050004. IF SOMEONE COULD HELP ME.

    Hello

    Try to reset Windows Update components:
    http://support.Microsoft.com/kb/971058

    You can also try to start mode minimum troubleshooting:
    http://support.Microsoft.com/kb/929135

    All the best!

  • How can I fix error code "0xE0434F4D in downloading updates?

    I was not able to get Microsoft Update for 2 weeks... help!

    tests-

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • Error code: 0x800A0046 while windows update sites access & installation of updates... ?

    Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

    "Resolution of the error code: 0x800A0046".

    To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

    1. Click Start and run, type Dcomcnfg, and then click OK.
    2. Expand Component Services and then expand computers.
    3. Do right click my computer and then click Properties.
    4. Click the COM Security tab
    5. Under access permissions, click on change by default.
    6. Check that the following accounts are listed:

      On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

      The collapse of this Expand table this table
      Account name Permission type Permission
      Gites, administrators or a user who belongs to the Administrators group Local access Allow
      System Local access Allow

      On clients based on Microsoft Windows 2000

      The collapse of this Expand table this table
      Account name Permission type Permission
      Directors Local access Allow
      System Local access Allow
    7. If either of these accounts is missing in the access permission box, follow these steps:
      1. Click Add, click Advanced and then click locations.
      2. In the location box, click the Local_Computer_Name and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK twice.
      5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
      6. Repeat step 7 for all accounts that you just added, and then click OK.
    Step 2: Check the DCOM default properties
    1. Click the default properties tab.
    2. Make sure that the following configuration:
      • The Enable Distributed COM on this computer check box is selected.
      • In the default authentication level box, the connection is selected.
      • In the default impersonation level box, the identification is selected.
    3. Make the necessary changes and then click OK.
    4. Restart the computer.

    Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

    1. Click Start, click settings, and then click Control Panel.
    2. Double-click Administrative Tools.
    3. Expand computer management, and then expand local users and groups.
    4. Click users.
    5. In the right pane, double-click the account that you used to log on the computer.
    6. Click on the Member tab of.
    7. Click guests, click on remove and then click OK.

    Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

    1. Click Start, run, type cmd, and then click OK.
    2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
      SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

      Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

    Windows 2000-based clients

    1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:

      http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
    2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
      C:\Program Files\Windows Resource Kits\Tools
    3. Click Start, run, type cmd, and then click OK.
    4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
    5. Type the following command and press ENTER:
      Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
    1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
    Step 5: Check the local security policy

    Notes

    • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
    • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
      810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
    1. Click Start and run, type gpedit.msc, and then click OK.
    2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
    3. Click user rights assignment.
    4. In the right pane, double-click on impersonate a client after authentication.
    5. Verify that the Service accounts and directors are included.
    6. If the Service account or the Administrators account is missing, follow these steps to add the account:
      1. Click on add a user or group, click Advanced, and then click locations.
      2. In the location box, click Local_Computer_Name, and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK three times.
    7. Restart the computer.

    Step 6: Enable the persistence of user data in Microsoft Internet Explorer

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Security tab, and then click Internet.
    4. Click on custom level.
    5. In the settings dialog box, scroll down to the Miscellaneous section.
    6. Under the Userdata persistence, click Activate.
    7. Click OK two times.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Error code: 8024200d (cannot install updates)

    Error code: 8024200d (cannot install updates)

    Error 0x8024200D code is:
    SUS_E_UH_NEEDANOTHERDOWNLOAD
    The Setup program requires more data to download

    Option 1 - Download updates manually and install the same (you can find the same via number KB) -http://www.microsoft.com/downloads/en/default.aspx

    or you can simply try.

    Option 2 - How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    FYI - read - http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

    I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

    Hello

    You are able to install some other updates?

    I suggest you follow these methods and check.

    Method 1: Run the fixit.

    The problem with Microsoft Windows Update is not working:

    http://support.Microsoft.com/mats/windows_update/   

    Method 2: Run the clean boot and install the updates.

    To do this, follow the steps in this link:

    http://support.Microsoft.com/kb/929135

    NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

    If the method above does not work, proceed to the next method.

    Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

    If the method above does not work, proceed to the next method.

    Method 4: Rename the Software Distribution folder.

    Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

    1. Open an administrative command prompt window.
    2. Run the following commands and press ENTER after each command:
      1. Net stop wuauserv
      2. CD %SystemRoot%\System32
      3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
      4. Net start wuauserv
    3. Try to install updates again.

    Important: When you use this method, the following problems occur:

    ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

    ·         When you remove the Software Distribution folder, your download history is deleted.

    ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

    Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

    I hope this helps!

  • Error Code C800044E for Windows updates.

    I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.

    Hello

    1. all the troubleshooting steps have followed so far?

    2. the updates could not be installed?

    3. what fixit did you run?

    4 have have there been recent changes made on the computer before the show?

    I suggest you to follow the steps mentioned below and check if it helps.

    Method 1: Put the computer in a clean boot state and try to install the updates.

    http://support.Microsoft.com/kb/929135

    Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

    Try to download the update and install.

    Download Center.

    http://www.Microsoft.com/download/en/default.aspx

    Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 3: How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Then try to reinstall updates.

    I hope the information is useful!

  • error code 80070673 for windows update for vista

    error code 80070673 for windows update for vista

    Hello Jwisetoyo,

    Thank you for your message.  Please click HERE for a possible solution to your problem.

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Error code 646 when installing updates KB2288953, KB2288621 and KB2291599

    I get the error code 646 when installing updates KB2288953, KB2288621 and KB2291599.  My Dungeon udates on default.

    read the problems known in this page, they explain what to do. There is a link to a fix the article.

    http://support.Microsoft.com/kb/2258121

    Let us know if this helped.

  • Vista - Error Code: 646 (cannot install updates of work)

    Microsoft Works important updates. error 646?

    Here is an article with a fix for updates, get the error code 646 (mainly Office updates):http://support.microsoft.com/kb/2258121.

    If this does not work, try the Windows Update Agent to:http://support.microsoft.com/kb/949104/.

    If that still does not help, please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Update for microsoft security essetials KB2804527 (4.2.223.1) installation failure error code: 0x8004FF83 all other updates installed OK

    Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.

    What version of Microsoft Security Essentials you run?

    What operating system and service pack?

    Prior security software?

    No matter what security software installed again?

    Please read the following:

    A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

    You may need to use a cleaning tool to remove your prior security software:

    http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

    The current time and the date now in Ohio, the United States is

    07:28

    Wednesday, February 27, 2013
    UTC - 0500 (EST) Eastern Standard time

    UTC/GMT is 12:28 on Wednesday, February 27, 2013

    Current weather conditions in Columbus

    Cloudy4 ° C / 40 ° F
  • Error code 80070032 trying to update windows Vista

    Error code 80070032 trying to update windows Vista Hi I forgot I'm doing an update of windows & cant I disc clean up as well as other tasks that can do?
    can you help me please? Thank you please hurry my e-mail address below
    E-mail address is removed from the privacy *.

    ERROR_NOT_SUPPORTED 80070032
    Failed to create the directory or file

    Is this a sudden, new problem or a course?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • What can be done to solve the error code 000641; all windows updates fail

    I get the error code 641 trying to update the 17 items that need to be addressed. I tried several times and the same error message. Updates are marked as critical. Demand appears in my bar for letting me know that I've updated to install tasks.

    Hello

    You did changes to the computer before the show?

    Method 1: Run the fix - it of the article mentioned below:
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2:

    How to resolve problems connecting to Windows Update or Microsoft Update
    http://support.Microsoft.com/kb/818018/

    Method 3: Put the computer in a clean boot state, and then try to install the updates and see if that helps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

     

    Method 4: Temporarily disable UAC and see if that helps.

    Reference:

    Enable or disable the User Account Control

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

    Important:

    User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  • Error Code BC2 when Windows Update links intall Windows Live ID

    I get an error code BC2 whenever Windows Update tries to install Windows Live ID

    Hello

    ·         Are you able to install any other Windows update?

    ·         You will remember to do recent changes on the computer before this problem?

    I suggest you follow the steps mentioned below:

    Method 1:

    0x00000BC2 error means Error_Success_Reboot_Required. This means that you must restart the computer. If you have already connected to a live application, you can restart the computer and check if the problem occurs.

    Method 2:

    If the previous step fails, follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    For your reference if you have any particular Windows installation updated question. You can follow the steps in the link:

    http://support.Microsoft.com/kb/822798

Maybe you are looking for

  • camera for ec16000 file

    Hi all I'm looking for the camera for Pricenton Instrument EC16000 file. (http://www.princetoninstruments.com/products/imcam/megaplus/#7) I bought a pice of framegrabber OR cameraLink 1427. I also downloaded generator of file OR a camera, but don't r

  • How to rotate my office of 90 degrees to the right so I can read without turning my head to the side?

    Original title: guidance office How to rotate my office of 90 degrees to the right so I can read without turning my head to the side? Thank you very much

  • vCenter 5.5: Web services management service could be started or ended unexpectedly

    Helloin our vcenter costs installed 5.5 (on Windows 2012r2), we are not able to start VMware VirtualCenter Management Web services, we have a lot of messages in the system log:"The service of VMware VirtualCenter Management Webservices ended unexpect

  • How to re install photoshop 5.1

    I had to uninstall my 5.1 Photoshop, the program does not directly open Lightroom 5. I have my registration number and need to know which of the downloadable files must be downloaded to re-install version 5.1 full.

  • How to add a link to the tables

    HelloIf all goes well, there is a simple answer to this question - I had this long table that I created and I separated it until the broadcast on several pages, which links the tables so that the information in the table would pass. -a worked very we