Error Code C800044E for Windows updates.

I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.

Hello

1. all the troubleshooting steps have followed so far?

2. the updates could not be installed?

3. what fixit did you run?

4 have have there been recent changes made on the computer before the show?

I suggest you to follow the steps mentioned below and check if it helps.

Method 1: Put the computer in a clean boot state and try to install the updates.

http://support.Microsoft.com/kb/929135

Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

Try to download the update and install.

Download Center.

http://www.Microsoft.com/download/en/default.aspx

Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

Method 3: How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

Then try to reinstall updates.

I hope the information is useful!

Tags: Windows

Similar Questions

  • error code 80070673 for windows update for vista

    error code 80070673 for windows update for vista

    Hello Jwisetoyo,

    Thank you for your message.  Please click HERE for a possible solution to your problem.

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

    Original title: my "Windows Installer is not installed properly.

    I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

    Hi Mark,

    Did you do any hardware changes or software on your computer before this problem?

    You can follow this link & check if the problem persists:

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

    Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

    Because of Windows Installer, you can follow this link & check if the problem persists:

    Error message "Could access the Windows Installer Service" when you install the application

    Hope the helps of information.

  • Error code: 0x800A0046 while windows update sites access & installation of updates... ?

    Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

    "Resolution of the error code: 0x800A0046".

    To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

    1. Click Start and run, type Dcomcnfg, and then click OK.
    2. Expand Component Services and then expand computers.
    3. Do right click my computer and then click Properties.
    4. Click the COM Security tab
    5. Under access permissions, click on change by default.
    6. Check that the following accounts are listed:

      On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

      The collapse of this Expand table this table
      Account name Permission type Permission
      Gites, administrators or a user who belongs to the Administrators group Local access Allow
      System Local access Allow

      On clients based on Microsoft Windows 2000

      The collapse of this Expand table this table
      Account name Permission type Permission
      Directors Local access Allow
      System Local access Allow
    7. If either of these accounts is missing in the access permission box, follow these steps:
      1. Click Add, click Advanced and then click locations.
      2. In the location box, click the Local_Computer_Name and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK twice.
      5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
      6. Repeat step 7 for all accounts that you just added, and then click OK.
    Step 2: Check the DCOM default properties
    1. Click the default properties tab.
    2. Make sure that the following configuration:
      • The Enable Distributed COM on this computer check box is selected.
      • In the default authentication level box, the connection is selected.
      • In the default impersonation level box, the identification is selected.
    3. Make the necessary changes and then click OK.
    4. Restart the computer.

    Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

    1. Click Start, click settings, and then click Control Panel.
    2. Double-click Administrative Tools.
    3. Expand computer management, and then expand local users and groups.
    4. Click users.
    5. In the right pane, double-click the account that you used to log on the computer.
    6. Click on the Member tab of.
    7. Click guests, click on remove and then click OK.

    Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

    1. Click Start, run, type cmd, and then click OK.
    2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
      SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

      Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

    Windows 2000-based clients

    1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:

      http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
    2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
      C:\Program Files\Windows Resource Kits\Tools
    3. Click Start, run, type cmd, and then click OK.
    4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
    5. Type the following command and press ENTER:
      Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
    1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
    Step 5: Check the local security policy

    Notes

    • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
    • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
      810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
    1. Click Start and run, type gpedit.msc, and then click OK.
    2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
    3. Click user rights assignment.
    4. In the right pane, double-click on impersonate a client after authentication.
    5. Verify that the Service accounts and directors are included.
    6. If the Service account or the Administrators account is missing, follow these steps to add the account:
      1. Click on add a user or group, click Advanced, and then click locations.
      2. In the location box, click Local_Computer_Name, and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK three times.
    7. Restart the computer.

    Step 6: Enable the persistence of user data in Microsoft Internet Explorer

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Security tab, and then click Internet.
    4. Click on custom level.
    5. In the settings dialog box, scroll down to the Miscellaneous section.
    6. Under the Userdata persistence, click Activate.
    7. Click OK two times.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Error Code BC2 when Windows Update links intall Windows Live ID

    I get an error code BC2 whenever Windows Update tries to install Windows Live ID

    Hello

    ·         Are you able to install any other Windows update?

    ·         You will remember to do recent changes on the computer before this problem?

    I suggest you follow the steps mentioned below:

    Method 1:

    0x00000BC2 error means Error_Success_Reboot_Required. This means that you must restart the computer. If you have already connected to a live application, you can restart the computer and check if the problem occurs.

    Method 2:

    If the previous step fails, follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    For your reference if you have any particular Windows installation updated question. You can follow the steps in the link:

    http://support.Microsoft.com/kb/822798

  • Error Code C800044E when the update of Windows Vista

    Please can someone help me with a problem I tried to download updates for windows.
    Whenever I'm looking for download the error code c800044e is displayed.

    I don't know much about laptops but can follow directions.
    I've been on microsofts website and fact as they advised IE SafeMode etc but nothing works.

    Please can someone help me... Ive had the phone for two years and I want to give my young children to use for school work etc but it keeps crashing.
    I did several scans for these two viruses & spyware etc but they come up clear.

    I hope someone can help me and talk me through how to fix this problem with steps clear lol...

    Thank you very much

    Hello

    I googled a bit more for this Microsoft error message and information refers to this MS knowledge base article:

    http://support.Microsoft.com/default.aspx/KB/971058

    Try the solution given by Microsoft, run the fix it Wizard

    Maybe it helps.

  • Error code 646 for Windows Microsoft Office Update.

    I have Microsoft Office 2007, and for weeks now Windows Update is not able to update the necessary updates. Error code 646 appears after updates fail, but all of the other Windows updates work very well but these Microsoft Office simply don't work and it happened for weeks. I searched for answers, but all lead to dead ends. Help!

    BROWNEY,

    Gives it a try and see if it solves the problem....

    http://support.Microsoft.com/kb/2258121>

    Let us know if this helped

  • Error code 80070490 in Windows Update (5 important updates failed)

    I am very close to give up because I tried to solve this problem for days now :( I get an error every time in Windows Update (error Code 80070490) and I tried so many times to install these updates, but the exact same error happens every time. I tried to delete all the files in the folder C:\Windows\SoftwareDistribution and start again, but it happens again and again.

    5 updates failed are as follows:

    Update for Windows Vista KB2756822

    Update security for Windows Vista KB2705219

    Update security for Windows Vista KB2731847

    Update for Windows Vista KB2661254

    Update for Windows Vista KB2749655

    My Windows/OS is Vista, and it's a real version enabled.

    Please help will highly appreciated!

    Joe

    Your problem KB948465, which is the update to Vista SP2.

    2016-03-19 20:21:22, info CSI 000001e8 [SR]

    Cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2016-03-19 20:21:22, 000001ea CSI Info [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2016-03-19 20:21:22, 000001eb CSI Info [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

    Your operating system is corrupted. To eliminate the problems on your computer, you need to restore factory settings and rebuild your computer system.

    A recovery of the system partition contains a copy of the operating system as it was when the computer was purchased new. Using the copy of Vista, you can restore the computer to factory settings. Of course you must back up your data files to an external before restoring support as the process reformats the disk thus clearing all existing files before writing new files.

    Please read Chapter 13 (page 33) Manual:
    5738 http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=633967123940952836&STEP1=notebook&Step2=aspire&step3=aspire & OS = ALL & LC = en & BC = ACER & SC = EMEA_27

    The manual suggests that you have an option to restore the operating system and retain user data that I've not seen in a manual before. It is worth trying because it reduces the work involved but I would again as a precaution, back up your data files on external safety precaution if things go wrong.

  • What can be done to solve the error code 000641; all windows updates fail

    I get the error code 641 trying to update the 17 items that need to be addressed. I tried several times and the same error message. Updates are marked as critical. Demand appears in my bar for letting me know that I've updated to install tasks.

    Hello

    You did changes to the computer before the show?

    Method 1: Run the fix - it of the article mentioned below:
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2:

    How to resolve problems connecting to Windows Update or Microsoft Update
    http://support.Microsoft.com/kb/818018/

    Method 3: Put the computer in a clean boot state, and then try to install the updates and see if that helps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

     

    Method 4: Temporarily disable UAC and see if that helps.

    Reference:

    Enable or disable the User Account Control

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

    Important:

    User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  • error code 646 for the updates of Microsoft office

    error code 646 for Microsoft office updates KB949710, KB951550, KB973593, KB950130, KB951944, KB973704, KB974561. Help, please

    Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

    Read the info on the above link to error Code 646.

    With the compliments of: David_O - Support Engineer

    This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

    Method 1: Save the Windows Update files

    1. click Start and type notepad in the box start the search .

    2. click on Notepad in the programs list.

    3. copy the following commands, and then paste them into the opened Notepad window:

    REGSVR32 WUPS2. DLL/S
    REGSVR32 STINKS. DLL/S
    REGSVR32 WUAUENG. DLL/S
    REGSVR32 WUAPI. DLL/S
    REGSVR32 WUCLTUX. DLL/S
    REGSVR32 WUWEBV. DLL/S
    REGSVR32 JSCRIPT. DLL/S
    REGSVR32 MSXML3. DLL/S

    1. in Notepad, on the file menu, click on record under.

    2. in the list record under , click all files.

    3. in the file name box, type register.bat.

    4. save the Register.bat file to your desktop.

    5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

    6. try to install the updates again.

    Method 2: Download and install Windows Update agent

    For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

    949104

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not help:

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • ERROR CODE 80070490 INSTALL WINDOWS UPDATE

    Separated from this thread.

    I GET THE ERROR 80070490 CODE WHEN THE WINDOWS UPDATE IS RUN.
    CAN A HELP ON THIS?
    I READ THE ANSWERS TO MOST OF THE SIMILAR COMMENTS, WITHOUT SUCCESS.
    Thank you
    AMEER

    Hello

    What operating system is installed on your computer?

    I suggest following the steps mentioned in the link and check:

    Windows Update, error 0 x 80070490

    https://support.Microsoft.com/en-us/KB/958044

    It will be useful.

  • ERROR CODE 643 whejn windows update

    get them help error code 643 trying to update windows vista,

    Try the fix it http://support.microsoft.com/kb/971058

  • Error code 646 in windows update update of security for MSXML 4.0 Service Pack 2 (KB954430)

    Lack of this continuous update and when I tried to download it from Windows Center it says error opening installation log file. Verify that the specified log file location exists and is writable. Grateful for any advice, because this is my oldest update and seems to be the origin of the later updates to fail

    http://support.Microsoft.com/kb/2258121/en-AU

    You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

    http://www.Microsoft.com/downloads/en/default.aspx

    Also, try to put the KB numbers in the search at the above link > then download them manually.

    If the above does not solve it:

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • error code: 80070645 for definition update for Windows Defender

    I need help I tried to install this update for weeks, without success. For some reason any the definition update for Windows Deffender has something in it. It keeps showing the error code 80070645. Please answer.

    DJSkywalker,
    Take a look at this article as it addresses the error you see.
    Let us know if that helps.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a prob with my windows update... some of them not yet... install the error code is the window update 646.can u help give solution for me please? Thank you appreciate

    ... my window update error code 646 error

    See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • access to documents in icloud macbook

    Hello..  How do you see all your documents in icloud/drive? you first drop them in the drive to icloud on your pc?

  • iMessage received read

    Someone know when you read their iMessage according to whether an iMessage not a SMS if you disabled "send read receipts" in your iphone message setting menu or not?

  • HP Officejet PRO 8610: No Option "form to tray assignments.

    Hey,. I just installed a HP Officejet PRO 8610 with accessory extra tray 2 (A8Z70A) on a 64-bit windows 8.1 computer. The printer is connected. What I'm asking, it's for my users to be able to send legal documents of sizes to the printer and have it

  • Is there a driver for Mac OS 10.7 and HP Scanjet 4600?

    I upgraded to Lion not knowing he had a problem with PowerPC applications. My HP Scanjet 4600 does not work on the new OS 10.7, and I need to work, as is the best scanner I've ever used. I want to continue to use is that I travel with my laptop MacPr

  • Search for floppy drive error

    every time I start the computer, I get the same message then press F1 or F2.  It is with xp.