error code: Stop 0x0000008e

When you start windows (Vista 32 bit), it shows my desktop for about 10 seconds and then BSOD with 0X0000008E error code; on the advice of Microsoft, I downloaded and run msert.exe, however, it does not solve the problem; I ran several ladies of virus, but they do not find virus or other problems. I ran the memory diagnostic, who also finds no probs. I don't know where to turn (or what to try) next. If anyone can help, please do.

Thank you/Bravo

Hello

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

--------------------------------------------------------------------------------------------------------------

Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

See methods of update driver generic in the next message.

BCCode: 8th 0x0000008E is the same as 0x1000008E

Cause

Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

Solve the problem

If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

You can solve the problems of BIOS by upgrading the version of the system BIOS

BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

=============================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------

Also this, so you can see the probable bluescreens. (If necessary)

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

It comes to my convenience store generic bluescreen:

Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • get error codes; STOP: 0X0000008E

    Original title: keep getting error codes

    I get a blue screen that says STOP: 0x0000008E, (0 x 80526476, 0xA9577C28, 0x00000000 whenever I turn on the computer I need help please)

    Hi emikikmybenisa,

    (1) since when are you facing this problem?

    (2) remember to make changes to the computer?

    Error message Stop is normally caused due to hardware problem. I suggest you try the following steps:

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    Step 2: You can follow the steps mentioned in the articles below which deals with a similar question

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

     

    General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

    http://support.Microsoft.com/kb/945658/

     

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error code: Stop: 0x0000008E (0xc000001D, 0xF0Fe6005, 0xFA018D9c, 0x00000000

    This is the error message that I receive on my Dell - any help?

    It can help to look at the files minidump against accidents with a debugger.

    Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

    In addition, you do not necessarily have compress the minidump files, you can download one at a time.

  • 800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics

    800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics

    Hello Michael,

    Thanks for posting your query on the Microsoft Community.

    You can improve your current PC to Windows 10 by going to the Windows 10 software download page to download the media creation tool. The media authoring tool can be used to create a USB or DVD media to upgrade your current PC to Windows 10 or install Windows 10 on another PC.

    Follow the instructions on the download page of Windows 10 software: http://www.microsoft.com/software-download/windows10

    Note:

    When upgrading to Windows 10 using media, you must run setup.exe from in your version of Windows 7 or Windows 8 and authentic. If you want to boot from media, you must have upgraded to Windows 10 previously. Boot 10 Windows media directly without upgrading to Windows 10 previously is not supported and will have problems with activation.

    See also:

    Helps the upgrade to Windows 10

    How to: solve the Setup and stop common mistakes during the Installation of Windows 10

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Error code: __Stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) can anyone help please

    My laptop Acer gives me a blue screen on start, or crashes on startup.
    I just got an error code:
    Can stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) anyone help please

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
    You must identify which exception has been generated.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Blue screen with the error code STOP 0x000000ED (0X8A518690, 0XC0000006, 0x00000000)

    Hello

    My son has installed a CD on my laptop & then my laptop invite STOP error code 0X00000ED &

    I try to boot my laptop & it keep starts & restart.

    I have try it on safe mode also does not work.

    Pls help.

    I would take a peek at this thread in this link instead:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

    I doubt that last good Configuration know you will help (this is not what it is for) and if you say that you can not boot mode safe (of course), none of these other "methods" will help you to either - this isn't the problem.

    What a pity that it knows absolutely nothing about your system.  This is because the MS Answers forum does not prompt for any information system when a new question is asked.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  • Error code "STOP: c000021a" with "0 x 00000080 (0x00000000 0x00000000).

    I recently had a blue screen of death error. I looked at the error on the microsoft Web site and the help file describes the solution had it used xp cd and repair of windows. I don't remember the exact error code, but it is a missing or damaged *.dll file.

    I put the xp cd in the tray and restarted my computer and booted from the cd. In the repair window I pressed 'enter' and then press 'r' when my score has been selected. Once the files have been copied from the cd on the hard drive of the computer restarted. When the computer has been restarted another blue screen of death appeared. This time, the error is:
    "STOP: c000021a {fatal system error}.
    The windows logon process ended unexpectedly with status 0 x 00000080 (0x00000000 0x00000000)
    The system was stopped.
    I tried to start in safe mode and it does not work. A screen will appear which says that «the installer is restarted...» "and then I get the same error hat that I mentioned above. I tried pressing F5 and load the last known configuration and the same sequence of screens appear (as already mentioned in this paragraph) and I get the same error after the screen «setup is restarted...» ».
    I have the latest updates and SP3 on my computer.
    I tried to fix my computer and it seems that its broke now.

    As I said before, choosing to do a repair install and not being only unable to complete there is the reason of your problems. All I can think is to do the following:

    1. get an external hard drive if you have not already.

    2. create an emergency boot disk (e.g., UBCD4Win, Hiren, Knoppix, Ubuntu) and boot top to copy all your data to the external hard drive.

    3. try to use the Recovery Console again (boot from your XP CD again) in order to run chkdsk/r a second time.

    4. you may even run chkdsk /r a third time.

    5. If still no joy, grit your teeth and perform a clean installation. There is no need to install SP2; You can go directly to SP3. Here are some very good instructions for your own installation:

    http://www.WindowsXPHome.WindowsReinstall.com/installxpcdoldhdd/indexfullpage.htm

    And for maximum benefit, I recommend you to follow these suggestions:

    1. download the installation of SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

    http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

    And if you wish, download the Setup file of a good anti-virus program. I recommend the free version of Avira AntiVir:

    http://www.Avira.com/en/Avira-free-antivirus

    2. disconnect Internet.

    3. temporarily disable the automatic updates.

    4. install the SP3.

    5 move to IE8.

    6. install anti-virus software.

    (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

    7. make sure that firewall Windows is activated (it should be).

    (Now you can go physically reconnect to the Internet.)

    8 visit Windows Update to download and install only the critical security updates.

    9. reactivate the automatic updates.

    After the back if you need guidance.

  • Error code: STOP: 0X00000ED UNMOUTABLE_BOOT_VOLUME

    HOW CAN I RESTART WINDOWS XP?  It always comes right away at this message, UNMOUTABLE_BOOT_MENU

    STOP error code: 0X00000ED (0X8234B900X, 0XC0000006, 0x00000000, 0x00000000

    What have you tried and what does not work?

    What happened when you tired of everything that you tried not working?

    You did the recovery CD of Console.
    Assure you it works by testing on another system (if possible)
    Have been able to boot to the CD from Recovery Console, you are.
    Have you been able to run the chkdsk /r command.

    Note that every Wednesday, my crystal ball is going bowling so please try to add a little more detail on what happens here and answer these questions to the best you can:

    Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    If the system works, what do you think might have changed since the last time it did not work properly?

  • BLUE SCREEN of DEATH error CODE * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4)

    I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times.  I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.

    Alex

    While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

    * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

    http://www.Knoppix.NET
    http://www.nu2.nu/pebuilder/ - Bart PE Builder

    When you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.

    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

    And for future disaster recovery programs:

    http://www.elephantboycomputers.com/page2.html#Backing_Up

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

  • I have an error code Stop 0 x 00000050 on a blue screen when I turn on my pc and there is nothing I can do.

    Hi I was using my computer and I went to a Web site. It is then loaded something that resembled the command prompt. It came then with a blue screen. I had these before, but after restarting my laptop everything worked normally again. When I turned it back on, he asked what I want to do e.g. start in safe mode. I tried all the and he arrives with windows at the loading screen for a split second and then returns to the blue screen. Everything I try just brings back me to the blue screen. I still have the disks that came with my laptop I f it's any help. Its xp edition and home.

    aaron1122,
    Well, it sounds as if you might have picked up a virus (possibly).  I hope you have your data backed up.  If you see a real error code then after return what it is.  I'll try to get back to you if possible (it seems all MVPS and people intelligent people are hanging out in Win7 and Vista forums-XP is kind of old).  But hey there are some of go us around. :)   If you do not see the error msg, then on the boot selection screen select the option for 'Stop on error' (I can't think the real verbage but it's something like that).  Then you can get an error code.  If you get any errors, make sure that you have tried the steps in this thread: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e
    Then if you can boot into safe mode with command prompt and run "sfc/scannow" you will need the XP disc for this.

    If all else fails or you just want to get on the fast track, you can use your recovery disk and do a factory restore.  (Most of the time) will delete everything on your PC and update you 1.  If you go this route, make sure to get antivirus and backup of your data in the future.

    Hope this helps. QQ learn manage!

  • Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

    I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

    Hello

    You are able to install some other updates?

    I suggest you follow these methods and check.

    Method 1: Run the fixit.

    The problem with Microsoft Windows Update is not working:

    http://support.Microsoft.com/mats/windows_update/   

    Method 2: Run the clean boot and install the updates.

    To do this, follow the steps in this link:

    http://support.Microsoft.com/kb/929135

    NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

    If the method above does not work, proceed to the next method.

    Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

    If the method above does not work, proceed to the next method.

    Method 4: Rename the Software Distribution folder.

    Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

    1. Open an administrative command prompt window.
    2. Run the following commands and press ENTER after each command:
      1. Net stop wuauserv
      2. CD %SystemRoot%\System32
      3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
      4. Net start wuauserv
    3. Try to install updates again.

    Important: When you use this method, the following problems occur:

    ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

    ·         When you remove the Software Distribution folder, your download history is deleted.

    ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

    Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

    I hope this helps!

  • Windows no longer starts 7, error Code Stop: 0x0000007B

    Hello

    Recently, I have rebuilt my computer and now my OS does not start.  I use windows 7.  Windows starts too boot, then fails. I get this error code.  STOP: 0X0000007B

    I think my hard drives are on the right type of SATA, so I don't know what to do now.

    If you have any ideas then let me know, thanks!

    -Joseph-

    It is rare for Windows run when ported to different hardware. In most cases, you must perform a complete reinstallation.

  • 0x8050800c error code, stop Windows scans, how do you overcome this?

    0x8050800c error code, how can it be overcome so that the scans can be run?

    Hi MichaelJCCR,

    Are a. When you facing this problem?

    B. what tool do you use to scan your computer?

    C. recent changes made on your computer?

    I suggest these steps.

    Step 1

    During a review, if the removal tool detected malicious software contained in a malware archive file, such as a .zip file. You need to determine if the file is a malware and remove it to archive manually.

    1. To determine whether the file is malicious, visit the Microsoft Malware Protection Center:

    http://www.Microsoft.com/security/portal/ (http://www.microsoft.com/security/portal/)

    1. Search the Microsoft Malware Protection Center encyclopedia to see if the file is listed as malicious software.
    2. If the file is listed as malicious software, remove the file and perform the analysis.

    Step 2

    Run a check disk on your computer.

    1. click on Start

    2. type cmd in the start search box.

    3. right click on cmd at the top and choose run as administrator.

    4. in the command prompt type the command chkdsk /r and press to enter.

    Note: The disk check will try to fix bad sectors on the hard drive. If the data on the bad sectors will be lost. You can also try to run the Diagnostic tool to check your RAM memory.

    How will I know if my computer has a memory problem?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

    Step 3

    If you use windows Defender, try the steps from the post below, who has worked for some people. These steps also applies to vista and it is mentioned in the post

    http://social.answers.Microsoft.com/forums/en-us/msescan/thread/a5810b32-5470-46aa-8BE4-634f06064131

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Blue screen with error code * STOP: OX000000F4 (OX00000003, OX8A30X, 8A30F2680

    I get this error blue screen frequently on the pc, the problem occurs intermittently. There is no point. Please help me solve the problem and what is its cause. "THE PROBLEM HAS BEEN DETECTED AND WINDOWS IS SHUT DOWN TO PREVENT YOUR COMPUTER."
    A SYS OPR PROCESS A UNEXPECTEDBLY HAS EXISTED OR TERMINATED.

    STEPS-

    TECHNICAL INFORMATION

    STOP: OX000000F4
    (OX00000003, OX8A30X, 8A30F2680

    BEGINE PHYSICAL MEMORY DUMP.

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:

    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy.
    * Join ZIP archive to your message by using the button (attachments) "trombone".
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

    To ensure the minidumps are enabled:

    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    Please also run MSinfo32 and download the output as well.

    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    (Instructions for XP, Vista, Win 7, Win 8)

  • blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

    blue screen code error 0x0000007e

    http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182

    http://support.Microsoft.com/kb/953356

    Or more articles in this search:
    http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20

    Hope one of these AIDS. QQ learn manage!

Maybe you are looking for