Error code Win32 returned by the print processor: 2147500037. Unspecified error
I see that this error code has been resolved. I have a few questions on this topic tho. Loop here, is where the fun begins. If i see this exact problem in my hosted cloud envorioment. The printers are installed locally and are drawn on the network when the user logs in the hosted environment. The user connecting to a full desktop, which is a Windows 2008 R2 server server. They only receive this problem when printing via the cloud. that uses the same printer drivers installed on the local PC. On-site printing has the success rate of 100%.
Here are the mistakes I see:
Https://rem.exactbid.com/ServiceRequest/SRFsmart/srprintable.as, belonged to craig_REM, document failed to print on printer HP LaserJet P2050 Series PCL6 (from CRAIG) in session 18. Try printing the document again, or restart the print spooler.
Data type: NT EMF 1,008. Spool file size in bytes: 589824. Number of bytes printed: 540384. Total number of pages in the document: 2. number of pages printed: 0. Client computer: \\VS-XA35. Error code Win32 returned by the print processor: 2147500037. Unspecified error
Where I am confused, is that I have no driver installed on the server. they are all drawn in front of the user login local machine solange. With printing works fine locally. Uninstalling the drivers will make them any good? or where should I be looking next?
Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Serverforum.
I have two PCs connected to a "2wire gateway" I got ATT. I can read and write files to write to the network, but I can't print from the remote computer or client.Hi KennethBurns,-Are you connected to any network domain? If so, contact the system administrator to solve this problem.Here's a similar post on this issue. Follow the suggestion given by "Afzal Taher - Support Engineer" to solve this problem:Note: The suggestion given in the link is applicable for the Windows XP operating system.
When I try to print to a network printer, the print job does not print anI getting the error code: win32 error code returned by the print processor: 6. the handle is not valid. All ideas
In this case seems to be with the corrupted printer drivers.
Follow the steps below to reinstall the driver.
1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
2. find the icons that are associated with the printer, and then remove them.
3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
4. on the tab drivers, select the printer listed and click Remove. Please, select Remove driver and driver package.
5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
6. try to remove all related printer software.
7. then download the latest driver from the printer manufacturer's Web site.
8 install the driver.
All the best!
Impossible to install Brother printer (even with the latest drivers for windows 7). I suspect it's other print network drivers. During installation, the Brother software reports "the operation cannot be completed (error 0 x 00000706).» The print processor
I upgraded from Vista to Windows 7
When I try to add the printer manually, I can't select all ports.
Plug the printer causes Windows to try to install a driver, but it fails.
I suspect it was due to my University Pharos printing system. (It worked when I updated from Vista). After that I installed Win7 and started having all these problems, I was unable to uninstall due to errors of RPC ports. So I deleted manually and deleted all the registry entries.
Installation of a Brother printer still does not work.
Is anyway to reset all the settings of the printer? Wipe the slate clean? To restore all network ports?
Edit: I read other entries... My Printer Spooler kept crashing before and I had to restart via services.msc
Also ran sfc/scannow without error
Edit: I have since deleted all other printers listed in the management of printing, restarted, but still there is no listed ports.
OK, I found the solution. It turned out that all my print processors and ports have been replaced by the Pharos system (used by my University to charge for printing) DLLS. After the upgrade from Vista to Windows 7, it did not work.
They have become like this:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
«Pilot '=' "PSS08B07."» DLL.
«C:\\Windows\\system32\\spool\\PRTPROCS\\W32X86\\PSS08B07 "=" PSDriverPath "."» DLL.
«Pilot '=' "C:\\Windows\\system32\\PSS08B05."» DLL.
«C:\\Windows\\system32\\PSS08B05 "=" PSDriverPath "."» DLL.
Manually, I changed ALL the print processors, drivers and ports in CurrentControlSet, CurrentControlSet1, CurrentControlSet2 to their original values and deleted the Pharos irritating ones.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
restarted and it worked!
Too bad, the troubleshooting of Microsoft tool could not detect it.
See you soon!
I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...
Problem solved. Use another port.
Windows 7 Enterprise 64 bit. I am able to install HP LaserJet printers but no virtual printer. I can not load the XPS from Windows printer or Print to OneNote. I also tried to load more than one PDF printer and none of them work. The error I keep gettig to "cannot install the printer. The print processor does not exist. »
Any ideas would be appreciated.
My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.
Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction. We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.
[Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]
You wanted to post this in case someone else ran into a similar problem.
This is what worked for me.
I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).
Step 1: Stop the print spooler service.
Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.
Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.
Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.
Step 5: Start the print spooler service.
Try to connect or install your net printer and it should work now.
I hope this work for all of you.
I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?
Yes, you can try to replace localspl.dll winprint.dll
Create a restore point from the system beforehand and restart the computer later.
I am trying to connect to a printer on my home network. LaserJet 1020. Who lives on a different computer on windows 7. It works fine on his 'home' of that Win 7 cannot connect to the printer. but when I try to network I get this message. "Unable to connect to the printer. The print processor does not exist. I downloaded a new driver from HP without success. All of the suggestions. Thanks in advance.
Print processor which is using? Properties of the printer, Advanced Print processor. See if changing to wil Winprint allow the connection of the printer. Note the current so you can change back if required. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
Thanks to you two. I used the square brackets since they are in this season...
According to the scenario:
DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.
DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.
Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.
I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.
I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.
The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.
There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.
Is there anything I can do to get the job to the printer on DC2?
(And for those who ask why install on a domain controller, there is no member server in this site).
Thanks for posting your question on the Microsoft community.
The question will be better suited to the audience of professionals on the TechNet forums.
I would recommend posting your query in the TechNet forums.
I'm trying to install an XPS printer on windows 7-64, but get the message "Print Processor does not exist". Can someone help me please
For any question on Windows 7:
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
With the latest Lightroom CC on a Windows 7 with the latest updates, all of a sudden the printer profile in the print job / the color of the right side of the print Module management framework is therefore more pre-filled with the last printer profile I used. It is always empty when I re-enter the print Module.
Anyone else got this problem?
I tried to create a new preferences file, but that did not help.
Could you please create a new catalog and a few images to test if t works well in a new catalog of import?
OT: Print processor.
During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly. The print processor is unknown. The printer name is invalid. Also "printer error code - 20 and the 1798 error.» I need CBWP. DLL to work properly in order to be able to use this program.
1. are you able to install other applications?
2. are you able to print from other applications?
If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.
Try to re - install a printer (Knoica/Minolta MC-2300-DL) and installation of the process works fine until you click the final OK... then I get the error message "cannot install the printer. The print processor does not exist. »
I used the FIX IT program and because he can't see this printer as installed, is not able to help.
· What is the edition of windows that is installed on the computer?
· What is the service pack installed?
If you have installed Windows XP Professional edition, there is a fix that allows you to solve the problem. The fix is included in Windows XP service pack 3.
Link to the fix: you cannot install a printer that uses a print processor in Windows Server 2003 Server or Windows XP Professional: http://support.microsoft.com/kb/906752
To install Windows XP service pack 3 access the link below: http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en
If you already have service pack 3 on the computer can see: you receive an error message when you try to use the Add Printer Wizard to add a printer in Windows XP: http://support.microsoft.com/kb/2410007
With regard to:
Samhrutha G S - Microsoft technical support.
I have Windows XP Media Center Edition 2002 series, and the PRINT PROCESSOR does not exist so my Kodak printer will no longer work with her. How can I get the processor of the printer on my computer? It works perfectly until a month ago, then the printer has stopped working with my computer. Kodak has been contacted and took control of my computer, and then could not solve the problem and reminded earlier. With control even once, Kodak showed me that the error led to a printer on Ms missing processor.
I have automated updates of Windows, so I don't understand how this 'left' my computer element. Ms. wants $99 back on my computer... but there must be a simpler solution. Any suggestions? Thank you
The computer has service pack 3. The error says"cannot install the printer. The print processor does not exist"... does this help?
Not really. I had this error before.
There is a Microsoft KB Article that address this issue: http://support.microsoft.com/kb/906752 but I'm a little suspicious of the applicability of this article because (a) you probably have a printer standard consumer (which is unlikely to have a "custom print processor"), (b) If your printer requires a "custom print processor", then Kodak should have known on this subject and what is provided , and (c) your system apparently works OK without the hotfix mentioned in the article.
Although I can't guarantee it will solve your problem, I suggest that you clean your printer drivers by following the instructions here--> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
Before you start to follow Bruce, open Control Panel > add or remove programs and remove anything related to your printer. Restart the computer.
Then follow the steps of Bruce 1-5. Restart the computer. As Bruce wrote, these measures should be sufficient, but if you want to be great depth, download and run cleanspl.exe OR follow steps 6-14 (in step 9, do not start the spooler or you will probably not be able to delete the files in the later stages; the spooler is restarted in step 14).
When you are finished, reinstall the printer as if you were doing so for the first time. Do not connect the printer to your computer until you are prompted to do so by the software. You should probably go on the Kodak website and download the latest software for your printer package; Otherwise, use the CD that comes with it.
Maybe you are looking for
I had problems to achieve this: 1. I have the ISO for windows 10. 2. follow the guests in boot camp 3 choose the second internal drive, which is not the startup disk. 4 wipe the drive and create a single partition for windows. Why this error occurs?
I just bought a Toshiba L40 - 14F laptop and it won't start at all. He didn't have any OS. When I turn the power on, the screen is black and nothing happens. The battery is charged (at least his indicator is green).So, can help me to have my new comp
I left my computer on last night and today my Notepad notes disappeared and when I bring up WordPad it doesn't list all the recent documents even if the documents are still there. is it possible to recover the files from Notepad?
My speakers just started humming and the volume is low I can mount the speakers but it still sounds low. I blew my speakers?
The question that I have is Windows "forget" that he uses the device. I will transmit data, and all goes well when the transfer suddenly stops and the program I use wrote that the device settings are wrong. But the device still shows to work correc