Error code Windows Update 80070490 and the message "Windows cannot check the updates.
Windows Update 80070490 error code appeared yesterday (21 September 2013) and the message "Windows cannot check for updates. I'm using Windows Vista 32-bit, Service Pack 2. I tried almost all the suggestions on the Internet (including on Microsoft Web page) on this way to solve this problem, including Microsoft fixed it, the update of the system, file Windows Update DIAGCAB Diagnostics tool and etc, but still getting the message. The last successful update was on 13.09.2013. All updates done before and September 13 are written as a 'success' in the folder "Update history", but when I open the folder "Installed updates", I don't see anything and it says "no update are installed on this computer", which is strange, because at the moment, Windows Update was made automatically without any problem. Please help me to solve the problem with this error code.
Thank you, you shared your experience with me, but I already solved the problem. Niemiro of Sysnative.com forum helped me for this
Tags: Windows
Similar Questions
-
OP: Action Center... PC problem: 1 important message
After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?
Hello Irfan,
Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!
wandrinstar
Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.
Keep up the good work,
wandrinstar
-
Error code 0 x 80070490 during the installation of service pack 1
* Original title: HELP
desperately trying to update my leptop with service pack 1 for vista home B.
downloaded service pack 1 manually, but for only error code0x80070490.se
Help:)Hello
Please follow the steps mentioned below and check if it helps.
Method 1: Run System File Checker
Scan system file checker on the computer that solves the problem with the system files. You can check the link for the steps below: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:http://support.microsoft.com/kb/929833
Method 2: Run the system update tool
Run the tool update of the system from the link below: Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821
You can also check: you receive an error code '0 x 80070490' when you use Microsoft Update or Windows Update Web sites to install updates: http://support.microsoft.com/kb/958044
I hope the information is useful!
-
don't really know where to post:
Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
System Restore error code 0 x 490 and Sys files integrity check..... .and now after trying to make the (that failed) repair and restoration * who failed 3 times) and the "clean boot" of http://support.microsoft.com/kb/929135 here my laptop charge a temporary office that does not record my personal settings. I uninstalled programs I thought that maybe the problem, but it always loads the Temp. desktop computer. I have no one.
drive recovery for this Toshiba laptop but I do it to my another Tower, which is a Toshiba as well. I really want to do a restore if I can help it. I have too in my bookmarks/favorites to lose. I just want to know what the problem is and fix it.
Any help would be appreciated. I don't really have the money to take it to a computer store.Concerning
BTHello
See if this helps you:
"Error of the user - logged on with a temporary profile profile".
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html
"A temporary profile is loaded after you connect to a Windows Vista-based system.
http://support.Microsoft.com/kb/947242
If you do not have to make a recovery here is the use of the Toshiba Recovery Partition.
https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true
See you soon.
-
Update error Code 646 when stopping and the installation of the Vista updates
I had problems with these updates... When I hit the closing down and install updates my computer installs the update but will have problems starting windows when I try to start my laptop. If I try to do it through the control panel error code 646 comes up... im on Windows Vista Home Premium, updates are as follows:
Update of security for Microsoft Office Excel 2007 (KB982308)
Update of security for Microsoft Office InfoPath 2007 (KB979441),
Update of security for Microsoft Office PowerPoint 2007 (KB982158),
Update for Microsoft Office Word 2007 (KB982135) security,
Update of security for Microsoft Office System 2007 (KB976321),
Update of security for Microsoft Office System 2007 (KB982312),
Update of security for Microsoft Office System 2007 (KB982331),
Update for Microsoft Office OneNote 2007 (KB980729),
Update for Microsoft Office System 2007 (KB981715)
Hello
Here are my recommended steps to resolve this problem:
1 disable UAC. Down comes the restrictions - turn it off completely.
2 restart your computer for the change to take effect.
3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
4. install. It should work fine.
5. If it still does not work, try to open all or part of your MS Office applications.
6. follow step 3. -
Recently, I reloaded a fresh load XP on my laptop. I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site. I tried several times to install updates, one, five and all at the same time and is unable to install. I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them. I also tried to update after the launch of a clean boot, always to nothing does not. I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results. FixIt has reported the following:
-------------------------------------------------------------------------------------------------------------------------------------
Details of the update of Windows editor
Problems found
Registration for the service is missing or corruptService registration is missing or damaged do not fixed
Sign up for the service Reset Succeeded
Problems installing recent updatesProblems recent updates installation not fixed
Fix Windows Update succeeded
Problems installing recent updatesProblems recent updates installation not fixed
Fix Windows Update succeeded
Check verrouillesfichiers missing or damaged missing or corrupt files fixed
Repair missing or corrupt files Succeeded
Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
Reset Windows Update of the data store Succeeded
Verified issues
Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
Some security settings are missing or have been changedSome security settings are missing or changed Checked
Key of registry corrupt Patch registry Patch keysCorrupt
Detects the hotfix or corrupt cache Checked
Windows Update services aren't runningWindows update services do not run checked
Encryption services components are not the registeredCryptographic service components are not registered CheckedProblems found details
Registration for the service is missing or damaged do not fixed
Sign up for the service Reset Succeeded
Recent updates installation problems not fixed
Fix Windows Update succeeded
Recent updates installation problems not fixed
Fix Windows Update succeededCheck missing or corrupt files fixed
Repair missing or corrupt files Succeeded
Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
Reset Windows Update of the data store SucceededIssues checked the details of the detection
6 environment variables Windows Update are incorrect Checked
Restore the Windows Update environment variables is not running
Some security settings are missing or changed Checked
Reset the security settings is not running
Key of registry corrupt Patch Checked
Detects the cache fix corrupted or missing
Fix registry patch not working
Fix registry patch problems
Windows Update services do not run checked
Required for Windows Update registry files works not
Encryption services components are not registered Checked
Save the cryptographic components not workingDetails of detection
The service status
---------------------------------------------------------------------------------------------------------------
Can someone point me in the right direction to solve this problem?
Thank you.
Original title: Windows Update will not install on the new load XP
Hi all
Thanks for your replies. Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.
I clicked Start, click on run and typed the command following, and then click OK:
Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.I was then able to start the updates. There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86. He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update. I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night. I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.
This morning, when I rebooted, it installed some updates at startup, and I restarted again. He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date. N BITS issue for that. It took time, but completed settle. Restart again and now there are only 21 updates to high priority required. My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.
However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again. After I have re-enter the BITS service and restart it, the downloads are working again.
I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.
Ideas, suggestions or comments? I am slowly solve problems and if I persist, I can get this all taken care.
Hi Dan,.
From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.
Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll
Research should show this file in the following locations:
C:\Windows\System32
C:\WINDOWS\ServicePackFiles\i386
C:\WINDOWS\system32\bitsI hope they are all present, follow these steps to register the service.
Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
(If you do not have the command run in the start menu, hit the Windows key + R, instead)Do the same with this file: regsvr32 qmgrprxy.dll and then restart.
Here are the next steps.
Copy / paste this command in the field to run, and then click OK
%windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.infWindows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386
Then restart the PC again and continue with the rest of the troubleshooting steps.
Click on start, run and copy/paste the following and click OK: services.msc
You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.
Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.
If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dllRestart then try and start the BITS.
If you get the same error again, copy / paste the following text in the field run and click OK:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackupReboot once more and then try and start the BITS.
Let me know how you please.
-
Error 80070005 "Windows cannot check updates"
Can someone help me solve this problem?
Hi sballeh,
Thank you for using answers Forum.
This error means usually you do not have permission appropriate to run the update.
You use an account with administrator privileges?You could disable your anti-virue and malware/spyware protection temporarily to see if they are in conflict with the update installation program.
If this does not work, I suggest opening a session on the Administrators account integrated and update from there.
Click Start, right-click computer, and then click on manage.
Expand local users and groups, and then click the users folder.
Right-click on the connection of the administrator, and then click Properties, then remove that checking the account is disabled.
You can now restart the computer and log on to the administrator account and try the update again.
Give that a try and let us know how it works.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot install updates for Windows, error code: 0 x 80070490
Original title: Errornumber 0 x 80070490
My update of window does not work. It says something about the Place information has changed and give no suggestion how to repaire it. Its also impossible to reconfigurate windows. Do you have any suggestions?
With greetings
Filip
Hi Filip,
Were there any changes (hardware or software) to the computer before the show?
When you use Windows Update or Microsoft Update to install updates, you may receive error code: 0 x 80070490 if the manifest of components (CBS)-based services is corrupted.
Perform the steps from the link below and see if it helps.
Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates
Note: Make a backup of all your data to an external device as performing on-site upgrade may cause loss of data.
Note: updating of Windows 8 will remove all third-party applications installed, and it resets all default Microsoft applications.
Answer please if you have any questions.
-
Install Windows Vista Service Pak 2 upgrade
I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere.
http://support.Microsoft.com/kb/958044
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: window update problem.
Error code: 80246008 error Code 0 x: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 what its means? And how to solve this problem to?
(merged thread)
Hello
Did you do any hardware changes or software on your computer before this problem?
You can follow these links & check if it helps:
Hope the helps of information.
-
I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.
Hi Happyrockgeek,
Welcome to Microsoft Windows 7 answers Forum!
This problem occurs if the Windows security .dll files are incorrectly registered.
To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
Method 1:
Run (Checksur.exe) system update readiness tool.
To do this, follow these steps:
1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/default.aspx/KB/947821
2. try to install the updates again.
Methods 2.
Reset the Windows Update components.
1. to reset the Windows Update components automatically, click the fix button in the link below.
http://support.Microsoft.com/kb/971058
2. click run in the file download dialog box and follow the steps described in the fix it Wizard.I also suggest you to install the latest version of Windows Installer 4.5.
Follow the link below to download:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
and you can also try to install after you turn off the firewall.
It will be useful.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum.
-
Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work. I haves Windows Vista Home Premium SP2
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
Unable to get the error Code Windows Update 0 X 80076424
When the Windows Update of Vister site I get error Code 0 X 80076424 and I am unable to find a solution, can help you?
Thank you
Shashi
Hi Shashipatel,
1. were you able to download and install updates as soon as possible?
2 are you able to verify updates?
3. have you made changes on the computer before this problem?
4. What is the error message or an exact error code?
5. have you connected external devices other than the keyboard and mouse?
I would suggest trying the following methods and check if it helps.
Method 1:I suggest you to run the fixit from the following link:
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2:
Put the computer in a clean boot state, and then try to install the updates and check if the problem persists.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.
Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.
-
When you install Windows 7, receive the error Code 0 x 80070490
At the beginning of the installation of Windows 7, I get this error message.
* original title - Error Code 0 x 80070490 Windows Setup can't find a place to store temporary installation files. Intall Windows, make sure that a partition on your startup disk has at least 686 megabytes of free space
Try these suggestions:
Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:
Reset permissions
============1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
2. go to your desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
5. copy the following commands, and then paste them into the opened Notepad window:off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = fSubinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f@Echo =========================
Completed @Echo.
@Echo =========================
@pause6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
8. you will see a window of type BACK treatment.NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."
If the same thing happens, move to the next step.
Run the upgrade by using the built-in Administrator
================================
1. click the button start-> all programs-> Accessories.
2. right click on command prompt and select "run as Administrator".
3. click on continue when user account control window appears.
4 copy the following command and press ENTER:
NET user administrator / Active: Yes
5 restart the computer and then log on the computer of this administrator account.
6. run the upgrade to windows 7.
Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade. You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.
BTW, for your references, I found similar questions:
Windows could not create a required installation folder. Error code: 0x80070005
http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/"Cannot create file" error when you try to install Windows 7
http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856Error 0 x 80070005 when upgrading to windows 7 from vista
http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/See also:
http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d
CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
How can I fix error code 0 x 80070490. (windows update stopped running)
Windows Update has stopped running and I get an error code 0 x 80070490. windows8 running
I discovered were not installation of updates after the update of my PC (I guess they have never installed before).
Tried all 4 methods.
Try Method 1, I managed to install the older windows Update in the list (from early 2012) and the following. After that my PC tried to restart and update no longer works with any restart of the msconfig dialog box options.
I ran the command 'DISM.exe Online/Cleanup-image /Scanhealth', but the progress indicator is passed quickly to 20% and then did nothing for 30 minutes until I've finished the process.
What else can I try?
Maybe you are looking for
-
I'm a new logic/Mac user, so I think I'm missing something obvious. I use Logic Pro X I used the cycle recording recording a few songs - but changed the following setting: -went to folder, duplication of Audio recordings, create titles selected and M
-
Sync account deleted by mistake
I've updated to the new firefox 29 and to synchronize with the email as well as the former, I created a new account, BUT synchronization works ever, so I went back to version 28, but I eliminated the old account to not have conflict. Unfortunately, i
-
Power upgrade and help upgrade video card
HP Pavilion p6367c OS version: Microsoft Windows 7 Home Premium, 64-bitProcessor: Intel (r) Core (TM) 2 Quad CPU Q8300 2.50 GHz, Intel64 family 6 model 23 Stepping 10Number of processors: 4RAM: 8157 MBGraphics card: Intel (r) Chipset G45/G43 Express,
-
LabVIEW Professional 2012 development system
Please provide us the link to download 2012 LabVIEW Professional Development System.
-
BlackBerry Blackberry classic classic froze during reset to factory settings
Hello I wanted to do a factory reset on my classic Blackberry settings. But, it has benn 4 dayx and it is not yet complete. It is stuck at 99%. I read that I had to download BBLink and reinstal the os from there, but my phone is not recognized becaus