Error computer repair at each reboot of Windows Vista. Startup Repair says error ""could not repair.

Similar Questions

• Application installation Bluetooth on each reboot of Windows 8

  Got two older laptops Vostro 1310 and 1510.
  Both migrated from Windows XP to Windows 8 and so far, works fine, aside from a small problem of Bluetooth.

  Because it is not no matter what driver Bluetooth of Windows 8 for the Module Bluetooth Dell Wireless 360 (Toshiba), I installed Windows 7 (Toshiba 28.07.2009 drivers; (Version 6.0.1928.0).

  While this Windows 7 driver/software allows the Bluetooth works very well and also to provide the activation and the deactivation of the Bluetooth module with the mouse, click on (as in Windows 7/Vista/XP), he leaves after error at each reboot of Windows 8:

  Do you want the following program to make changes to this computer?

  program: instdev
  Publisher: toshiba
  origin: hard drive
  Location: c/program files/toshiba/bluetooth toshiba stack/instdev.exe /btsrv rereg

  The answers are 'yes' or 'no', but neither nor seems to make no difference to the functioning of the Bluetooth technology. Bluetooth works, but the annoying message appears again on the next reboot of the system.

  The message is triggered by the registry entry next autostart:
  ITSecMng-> %ProgramFiles%\TOSHIBA\Bluetooth Toshiba Stack\ItSecMng.exe/Start

  No idea how I could get rid of this repetition error?
  Thank you very much in advance for any advice.

  Hi mate

  Toshiba BT stack can be used as part of Toshiba products.
  If you own a laptop from another manufacturer, you need to check and install drivers and tools provided by the manufacturer of the laptop.

  I have no experience with your laptop, but on my computer Toshiba laptop, I had to install the driver for the Toshiba system before the BT stack to win 8 would be installed.

  I think you should check the info to install it on the page of the manufacturer of your laptop.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error, "could not stop main service of McAfee Amti-malware on the Local computer. Error 5: access is denied. "when trying to stop the McShield service.

  Original title: mcshield is a nightmare for me.

  McShield is a nightmare for me.  Its location is c:\program files\common files\mcafee\ACore\mcshield.

  When I try to stop it in services.msc I get the error "could not stop McAfee Amti-Malware Core service on Local computer.  Error 5: access is denied. »

  I have administrative rights at sign on. How to stop this monster?

  http://www.pchell.com/virus/uninstallmcafee.shtml

  read this through

  If it was me I would uninstall McAfee, it is not highly recommended by someone I know.

  Once it is removed, try a free antivirus, I use MSE, but you have to read the instructions first!

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Download MSE

  http://experts.Windows.com/w/experts_wiki/89.aspx

  MSE installation checklist

  If you choose to use Mcafee, download autoruns, which shows which takes over at the start and you can disable here.

  AUTORUNS

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  Above is autoruns to loadup questions

  If you still can't find the entry in the registry, download Autoruns.  Let it finish the scanning, then click the Services tab.  Find the name of the service 'wrong' in the left column ("Autorun entry").  Right click and select ' go to '.  You will go straight to the appropriate entry in the registry for editing.

  I would like to examine what you load at startup. You should see if you have any programs from loading during the startup process, which can be changed on request.
  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  When you use Autoruns, you will need to click on the "Connection" tab to see what runs at startup.

• Error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Original title: sbdbrbs

  When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Can anyone offer any assistance?  Could not find this particular dll through search engines file.

  Thank you

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

  original title:. Error loading windows

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

  First of all, download, install, update and scan with these two free utilities:
  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

  Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.

• Error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

  When I boot, the following message is displayed: error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

  Anyone know what it is? I have not noticed a difference in the way the computer runs

  Looks like it is or was part of the malware. Download ccleaner install then run it. Go to tools / startup highlighted / delete

• I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office.

  Model F730 laptop and notebook product S/n CNF7415WH7

  I bought a laptop (compaq F30 us in the United States) and windows original vista came with the compaq laptop (bought in US). Now, I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office. I don't have the cd or the software with me key since they have not provided for me at the time of purchase

  Hello

  No there is no way, how the do, because the license of Windows Vista is part of the computer compaq laptop - this is the license OEM - and cannot be separated.

  (in case the laptop is broken and cannot be repaired, then the license expiresand cannot be used on another computer)

  LC

• Error: 0XC004F050 Windows Vista Home Basic product key is not valid for activation

  I bought this dell laptop 2 years. my laptop is to sometimes have blue error screen, but when I restart it, allows it to function normally. recently, when I turn on my laptop, my screen goes black and a box come up saying that the Windows Vista Home Basic product key you typed is invalid for activation.
  

  Then he gives me 3 options
  1. access your computer with reduced functionality
  2. enter a different product key
  3. contact Microsoft to help solve this problem

  I was trying to enter the product key as indicated on the sticker attached to the bottom of my laptop but still invalid product key. Code: 0XC004F050

  I had

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 4WD8X - M9WM7-CH4CG

  The Windows Product Key hash: EkdqJZ28Y9zyrh7DU/lHNjTXlQY =

  Windows product ID: 89572-OEM-7332166-00096

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6001.2.00010300.1.0.002

  ID: {B353C367-9E97-407C-A335-269CB0707324} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows Vista (TM) Home Basic

  Architecture: 0x00000000

  Build lab: 6001.vistasp1_gdr.100608 - 0458

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0x80004005

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Caching the result: 103

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 103 blocked VLK

  Microsoft Office Enterprise 2007 - 103 blocked VLK

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\Tien Siew\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {B353C367-9E97-407C-A335-269CB0707324}1.9.0027.06.0.6001.2.00010300.1.0.002x 32*-*-*-*-CH4CG89572-OEM-7332166-000962S-1-5-21-2878899211-3288161655-3842348923Dell Inc.. Inspiron 1420 Dell Inc.. A07 20080203000000.000000 + 00034303507018400EA04090409peninsula malaise Standard Time(GMT+08:00)03DELL M08 103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6588114 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->

  C:\Windows\system32\slmgr.vbs(1635, 9) (null): 0xC004E017

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current HWID of Hash: PAAAAAEABwABAAEAAQABAAAAAwABAAEAnJ80kiKfGtPqTSSWoFyuf/yQRoPeS1K88vTm9 + 9aSGmsViqF

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value ValueOEMTableID

  REFERENCE DELL M08 APIC

  FACP DELL M08

  HPET DELL M08

  STARTING DELL M08

  Original title: my windows vista Home Basic product key is not valid for activation

  MCFG DELL M08

  M08 DELL SLIC

  SSDT PmRefCpuPm

  How can I solve the problem? Thank you.

  Run the Diagnostics of Genuine tool at this link http://go.microsoft.com/fwlink/?linkid=52012.

  Hi steph_ts,

  In addition to the suggestion of Andre.Ziegler, following links and check

  1. you remember to make changes to the computer before this problem?

  You can consult the following KB articles and try the suggested methods for error: 0XC004F050

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers

  http://support.Microsoft.com/kb/938450

  Error message when you try to activate a copy of Windows using the Windows Activation Wizard: "the Software Licensing Service reported that the product key is not valid: 0xC004F050.

  http://support.Microsoft.com/kb/950756

  Also see the following link for more information about reduced functionality mode:

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Error at startup: error loading c: | windows | izameweb.dll the specified module could not be found

  RUNDLL error

  The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.

  Error loading c: | windows | izameweb.dll the specified module could not be found

  Kind regards

  Anne-Marie

  Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix

• I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer. If yes how can I do this?

  I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer.  If yes how can I do this?

  If Vista is preinstalled on your OLD computer, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  If it is a retail Vista license, read the information on the clean install and then reactivate it:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11