Similar Questions

• guestScriptManager error: "guest authentication that is used doesn't have sufficient permissions to perform this operation.

  Hello

  I tried several days create a workflow to automatically remove the E1000 adapters on a virtual machine and its replacement by Vmxnet3 while maintaining the configuration of the network adapters.

  Everything works fine with Linux VM (as the configuration is automatically preserved) but I have an error on the virtual Windows computer where I have to run a Powershell script (tried with batch also script) with guestScriptManager package.

  Every script I try to run on a Windows 2008R2 VM does not reach the same step: create a temporary file in the comments. Error: "guest authentication that is used doesn't have sufficient permissions to perform this operation (workflow: create a temporary file in the task (item1) invited / Scriptable #8)"

  Strangely, I am able to run a script, one or two times to just after a VM deployment and then I'm stuck with this error.

  I tried with the local and domain administrator with no luck. I have no other description or log on to the error...

  Any help would be appreciated

  Thank you

  For those who are wondering, I just updated my 5.1 ESXi Update 2 and the problem is solved.

  Thanks to this thread: https://communities.vmware.com/thread/403326

• Error connecting to the Terminal for blackBerry Smartphones

  Hello

  I have a BB 8100, Desktop manager 4.6.

  The synchronization work properly 3-4 weeks ago.

  Today, when I tried to sync, I got this error message:

  0 x 80040fb3

  I tried debug it using the procedure of changing family name, first name, etc... without success

  I tried several times to synchronize again but without success.

  Now, the situation is even worse!

  New message when I connect my BB to my computer. When I run the Desktop Manager, I have the following error:

  "Error connecting to the Terminal. Make sure that your device is connected properly, and then try again.

  I can't not try to synchronize!

  It is very strange, it's never happened before.

  However, Desktop Manager recognize my BB, I can read on the button to the left of the screen: Terminal connected (Pin code) recognized xxxxxx.

  HELLLLP!

  Thank you

  You know what?

  I just read another post suggested.

  They simply offered to take off from the Blackberry battery and put it again.

  Then I tried to sync and IT WORKED! I can't believe! I tried a lot of complicated stuff!

  1 month for this problem! (with this simple solution!)

  Hope that now, everything will be ok!

  Concerning

• Solaris comments vmrun always says ' error: username or password for the guest OS.

  VMware Workstation 6.5.1 build-126130

  Host Linux, Solaris 10u5 x86_64 comments

  No matter what user I try the vmrun will not allow user name or password for the guest OS to accept. I tried the root, a user, and I even tried to make a new user.  Any order requiring - vmrun gu - gp fails with ' error: username or password for the guest OS.

  Is there a journal file, or something that I can look for a specific diagnosis?

  This support is something that we are studying, but I can't give any kind of timeline.

  Certainly, you can file a request for assistance on our Web site.

  If you are more of a do-it-yourselfer, there is the open-vm-tools project on SourceForge, which leverages the VMware tools and includes the part of the code that implements the operations of comments. We'd love to take all the contributions to this project.

• connection error of business rules for outline planning application

  Hi all
  I recently migrated schemas uat to configured prod.i evrything successfully.when database
  I loged in the console of Regional service with the user (other than the administrator) that the user has all access to create business rules.
  I tried to create new business rule to select the planning application.
  I get this error"error connection server essbase < servername >: < appname >
  in the details of the error "connection to the server pllanning < servername > error: < appname >.
  and "error loading of objects from data source: java.sql.SQLException: [Hyperion] [Oracle JDBC Driver] object has been closed."
  
  Please someone help on these
  
  concerning
  SAV

  Hello

  I reconfigure EAS on the machine production and the drop and re-create the database.
  So I'd either use the migration tool to copy rules from one server to another, or just rules the export as xml and then import them again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 4 x WAP4410N VLAN for guest network

  Hi there everyone,

  You want to have a problem of my resolved.  I am running 4 x WAP4410N access points configured with one corporate ssid with WPA2 Enterprise authentication that points to a server in network access protection.  What I'm trying to do is to add a second ssid to all my points of access for guests only and cannot connect to the departmental resources/devices.  I think I have to VLAN so that it works correctly.

  Four access points in various parts of the building are connected and are wired in different switches SG300.  A port on a SG300-52 in my server room is plugged into a port on my firewall that I would use for DHCP.

  What should I do to get this working correctly?  At the time of my comments to test network is not even give an IP address to the devices, which I think is related to the VLAN.

  I do not know what ports I leave the identified tag-no, how to configure the VLANs on multiple switches, etc.  Any help would be appreciated.  It was suggested to me that I could use dedicated to guest access separate access points, but I like to keep the amount of access points down to the minimum required.

  I think you may have found the problem. I apologize I have not asked if you were on layer 2. I would have thought it.

  If they all Layer 3, maybe you could just add a few routes? Switching is not my field stronger.

  Personally as needed I just don't sleep 2 and use VLANs

  Eric

• ISE IOS CLI authentication Quandry

  Im trying to push the limits of the ISE, as Ganymede + is not yet supported. The goal is to authenticate the switches and routers using RADIUS against ISE. I think I'm on the right track, since I can connect against ISE. However, when I login to activate the journal of ISE permissions shows lack of status of RADIUS, with an attempt failed to use $enabl15$.

  I have my unit added to ISE. An authorization profile has been created for each privilege level, I use strategy games and have the correct authz and the autht policies. Some examples of my configuration of ISE and configuration of the router. I hope that helps to solve my problem, or it can help the next troll successfully their own configuration.

  Profile of AUTH: When you choose priv-lvl = 15 after hitting save, web auth is automatically selected.

  

  Strategy game:

  policyset.PNG

  

  the router configuration

  RADIUS AAA server group Rad_AUTH1
  name of the server Rad_Auth
  !
  local authentication AAA CONSOLE connection
  AAA authentication login Rad_Auth group local Rad_AUTH1 no
  Group AAA authentication enable default Rad_AUTH1 allow none
  default AAA authorization exec no
  Group AAA authorization exec Rad_Auth if authenticated Rad_AUTH1
  start-stop radius group AAA accounting exec by default
  !

  Server RADIUS Rad_Auth
  ipv4 x.x.x.x address auth-1645 acct-port of 1646
  timeout 3
  touch 7 052F302B3B7E491B41

  line vty 0 4
  session-timeout 30
  exec-timeout 30 0
  exec authorization Rad_Auth
  authentication of the connection Rad_Auth
  entry ssh transport

  Glad that you got your own problem solved! Also, thank you for taking the time to come back and post the solution here! (+ 5 from me).

  Given that the problem is resolved you must mark the thread as "answered" :)

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• Error connecting to server Apple ID

  I try to connect to the App Store on my iMac running 10.11.4 and get the message "There was an error connecting to server Apple ID"

  I then tried to access App Store from my iPhone and iPad and had no problem connecting.

  What the * beep * is the problem, I can't understand why I would be able to connect from my mobile, but not my desktop.

  The only thing that seems logical is there another server (address) for iOS and OS X to connect to and it is online and working while the other is to have certain types of questions and/or is currently offline.

  Does anyone have any ideas or patches?

  They are two different application for one stores. Mac, you connect on the Mac App Store. Since iOS devices, connect you to the iTunes App Store.

  Firewall, antiviral software and applications such as Little Snitch can interfere with the Mac App Store.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.6.  Watch, 38 mm silver AL, Watch OS 2.2.1. iPad 2 Air & iPhone 6 + iOS 9.3.3;  Apple Airport Express

• There was an error connecting to server Apple ID Windows 10.

  I have 10 Windows on my pc. I have the most updated iTunes and iCloud updates as well. Since the last update, I am unable to connect to all apple from my desktop computer accounts. I can connect without problems on my iphone and ipad and icloud online. When I try to connect through to program desktop itunes or the icloud for windows program, I get a pop up window that says "check failed" - "There was an error connecting to the Apple Server ID." I tried to restart my computer, uninstall and re - install the two programs, I tried to change my apple id password. Nothing seems to work. Help, please! Thank you!

  Hi jwebb88,

  Welcome to Apple Support communities.

  From what I understand, you see a warning message when you try to access the sign in the iTunes Store or access to configure your iCloud for Windows.  Try to take a look at the article below the link that provides a lot of information and troubleshooting tips that will help solve connection problems to the Apple servers.

  If you cannot connect to the iTunes Store - Apple Support

  See you soon.

• "There was an error connecting to server Apple ID" not reliable CRL issue

  I started getting errors connecting to my Apple account on iTunes/App Store / iBooks etc., I noticed today.

  In an attempt to connect, it would return the message "There was an error connecting to server Apple ID"

  

  This debugging with Wireshark, I noticed that iTunes has been disconnected as soon as he saw the server SSL certificate.

  I opened the url field that he was using (https://gsa.apple.com) in Safari to see if reported certificate issues, and he confirmed that the intermediate certificate, although valid, could not be verified on LCR this is because he believes http://crl.apple.com/root.crl is unreliable CRL.

  

  Other computers, OSX, I checked are used the same certificate and validate the certificate successfully.

  I tried to set the certificate to always trust, but it has no effect.

  I changed Keychain Access-> Preferences-> Certificates-> certificate revocation list (CRL) of "Best tent", which seems to fix the problem, but I'm not keen on this change, because it could weaken the security of my computer compared to "demand if the certificate shows."

  Is it possible to restore the confidence of OSX CRL for this problem?

  In fact, I found just Keychain Access from another computer-> Preferences-> Certificates-> CRL (CRL) list is set to "Best tent", and causes 'Require if the certificate shows' the same question, so I guess it's a problem with the server Apple ID certificates themselves.

  I think I put the CRL settings to "Demand if the certificate indicates" some time to try to improve security. At one point, until recently, the https://gsa.apple.com worked with these settings so perhaps they changed the intermediate certificate, which presents the problem of CRL unreliable. It is http://crl.apple.com/root.crl and not https seems suspicious and could be the source of the problem untrustedness.

• verification failed - there was an error connecting to server Apple ID.

  Just upgraded to 10.11.4. Get this error when trying to login to icloud

  Verification failed

  There was an error connecting to server Apple ID.

  I can sign in here with my id, I can sign in icloud via my web browser to my id.

  What I can't do is connect from my imac (model 2015)

  Where should I go form here?

  I have exactly the same problem and I can check that if I create a new user on my MBP (current model of 15 "), I am able to use my Icloud account once again, but not under my main user. Thus, each suggestion found in the forums here:

  • Step 2 review the deactivation
  • Config of Flushing DNS or try another DNS server
  • Uninstalling an Antivirus snake oil product, I do not use

  did not help at all. But there must be something with my user account, the system itself seems to be fine as a new user account works with the same icloud account.

  This can happen now reasons:

  • I went to use the family option one or two months previously - unplausible that this has something to do with it

  Console output for two seconds after clicking on login to icloud prefs: line 2 + y has at least 20 times with different Classes but the same error:

  02.04.16 10:14:57, 409 akd [311]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9807)

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: it has no sense to draw an image when [NSGraphicsContext currentContext] is zero.  It is a programming error. Break on Sub _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be recorded only once.  This may change in the future.

  Next steps for me will be

  • hoping someone here has an idea, so I don't have to wast hours for this
  • try to restore a backup time new machine to a new user account (would be less work) - but this option I think that will lead to problems again. I'll let you know if it is a possible way to solve the problem.
  • From a user account from scratch and selectively import settings - there is no alternative option that takes time. Usually, this is not necessary and one of the reasons why I use a mac - only not to reinstall Windows every 3 months...

• Error connecting to the server Appleid

  Error when connecting Apple ID for server

  You don't need to post the same question twice. This error message you receive if necessary?

  It really helps if you ask a question with some information of base rather than the State a problem in the form of expression.

• an error occurred when checking for a software update

  My iphone6s when I check for the update, dosent work and say:

  an error occurred when checking for a software update.
  Please help me
  

  Greetings harera22dec,

  Thank you for using communities Support from Apple!

  I understand that in trying to upgrade to the latest version of iOS on your iPhone, you get an alert that says: "year error occurred while searching for an update of the software.»

  To begin troubleshooting this situation, I would first work through the steps in the section on your iPhone, iPad or iPod touch in the following article, and then try the update again.

  On your iPhone, iPad or iPod touch

  If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

  1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
  2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
  3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
  4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
  5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
  6. Reset the wireless router by turning and then again.

  If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

  If you cannot connect to the iTunes Store - Apple Support

  If the problem persists, try updating your iPhone from another network or from iTunes on a computer than this article implies.

  If you receive a message that says: "year error occurred downloading iOS ', try again later. If this happens again, try to update your device using a different network or use iTunes to update your device.

  Get help with updates of live iOS - Apple Support

  Have a great day!

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)