Error: Copy of master for the Type definition is not found

Similar Questions

• DDL required for the complete installation was not found. Error 1603. What should do?

  DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.

  I tried everything, but received the same message. Attached to the screenshot.

  

• Error code: 0 x 80070035 the network path was not found.

  Hi all

  I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
  Windows cannot access \\hyd02
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035 the network path was not found.
  
  
  I did the settings below:
  (1) file and printer sharing are enabled in both systems.
  (2) firewall is disabled in the systems.
  (3) in the center of security and network, the network is private.
  and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
  Off, media sharing turned OFF.
  (4) the name of the task force in both the system is the same.
  Can someone help me solve this error...
  Thank you
  Sylvie G

  Hi Sylvie G

  Thanks for posting on Microsoft Answers.

  Are the same username and password on both systems?
  What is the share name you are trying to do on the XP machine?
  Let's say that the share name is music, you would get to it by typing \\hyd02\music

  Can you do a Test PING since the Vista PC on the XP PC?
  Go to a command prompt and type ping followed by the IP address of the computer XP

  Please post back the results... Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• network error 0 x 80070035 that the network path was not found.

  I have problem of network with Win7 pro. When I click on my network folder links to my LAN I geterror 0 x 80070035 the network path was not found.

  The network has been set up for 4 months, it includes 3 PC, so far the only problems have been minor, such that the network links, which restart a system endangered has been necessary to update the network and worked.

  The 2 other PC can see and access each other and see and access PC Win7 Pro troubled, but troubled PC Win7 Pro can even happen to its own network without theerror records 0 x 80070035 the network path is not found, arise.

  After hours of checking, I have found no resolution, but as I restored it the PC several times, sometimes service reappearing for a while.
  In my search for possible causes, I opened the Device Manager with the selected hidden devices, under network adapters and found189 instances of card Microsoft 6to4.
  I don't have 3 PC's networked! Anyone know if it is a normal number for Win7 or I found part of an anomaly.

  Any suggestions?

  c.Maresca

  Thank you for your comments.

  In the search for a solution to my problem of network Win7 Pro, that I've been on all the settings you mentioned before that I posted my question and no problem, everything is as it is necessary to have a comprehensive network and the network was very good except the occasional missing links, which I described in my original post. The only addition to the configuration of PC from the network has been initially implemented has been automatic updates to update from Ms.

  The good news is that, as I studied it to the maximum, I found 2 messages in the network forum Win7 which combined provided the solution for my problem with the network.

  As I did research on it, I noticed that a lot of people have similar problems of network. I know that there are many reasons of connectivity issues, as well as the solutions are specific problems, but if other users of the network are affected by the problem of multiple card Microsoft 6to4 and local network error 0 x 80070035 that the network path is not found, the solution I found worked for me.

  If you want to see more respond to this stream.

  c.Maresca

• When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

  Original title:

  I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

  Hi Comicsancturn,

  Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

  Let us know if that helps.

• LabVIEW:EXE generates the error 1003 calling plugin with the type definition

  Hi all

  I am running LV 2012 on a Win 7 machine. I had this same problem with LV 2011, so I'm sure that's not associated with version/upgrade.

  Go to a LV-built EXE, I try to call a dynamically loaded Subvi. I did it several times with success before, so I think I know how. I prefer to use the call by reference, but I get the error 1003 Open Ref VI (with the type specifier). If I use the type specifier, can I open the Subvi, but the State is listed as 'bad '. Then, I went to recursively through all the subVIs (~ 25 in total) and concluded that the only item with a status of 'Bad' was a type definition.

  I checked several times, several different, that all ways the subVIs (and the definition of Type 'bad') are available to the Subvi dynamics. I did that the type definition is correct. I have also made sure the subVIs are stored as .VI files in the same directory and not within an EXE file. When I try to run the VI run call node, I still get the error 1003. I checked the path that displays in the error dialog box is the exact path for the Subvi (it would be for other VI properties and methods working properly).

  Why can't I run a sub - VI loaded dynamically from an executable if it has a type (a group of 3 trails) as output parameter definition?

  I just tested an idea: rename the library from project to project A create script. Now when it loads, it does not disturb what he must internally with externally called Subvi (dynamic). It worked the first time!

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• "File required for the Research Assistant is not found." How to restore my ability to use SEARCH?

  Whenever I have use SEARCH after STARTUP I get a message saying that a required file is missing, and that maybe I need to run the installation program. How can I retrieve the missing file and difficulty of RESEARCH?

  Try this link:

  "Error message:"a file that is required to run the search wizard is not found.
    <>http://support.Microsoft.com/kb/319949 >

  HTH,
  JW

• Movie Maker error: cannot be used because the audio hardware is not found

  I am trying to use Movie Maker on my lap top, but get the following error: Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  I don't know what is missing, please help

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to update the audio driver installed on the computer. You can visit the link below for the procedure: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Running the scenario of ODI number of command line only (for the linux files) - file not found

  Hi Experts,

  We load data from .txt files in Linux server into a table.
  Scenario runs perfectly when running Windows ODI GUI (on linux agent.we have two agents who perform one is windows and Linux).

  When we try to run it from the command line using startscen.bat getting following error.

  ODI-1227: SrcSet0 (load) task fails on the source FILES FILE_SERVER connections.

  Caused by: java.sql.SQLException: ODI-40438: file not found: /loadfiles/Test/xyz.txt

  By this mistake if we conclude that this file may not exist... But it works well to GUI.

  Infact we have given 777 permissions to file.

  Ideas please share...

  Concerning

  PrakashV

  Hi all

  It works very well by adding the URL of the AGENT in a syntax such as startsen

  StartScen.bat FILE_TO_ORACLE 001 GLOBAL-NAME = OracleDIAgent3-AGENT_URL =http://10.64.165.73:20912 / oraclediagent

• Houston-25058: type attribute Definition is not found in

  JDeveloper - Studio Edition Version 12.1.3.0.0

  Migration project 11.1.1.5 ADF - > 11.1.1.7-> 12 c.

  No problems during the migration and everything works fine (apart from a problem of Javascript).

  Now in the 12 c environment, I created a new application (library) and I am facing the slot issue during execution;

  Houston-25058: xxx attribute type Definition is not found in xxxx

  1. I have 3 of VO and all 3 have the same evaluation office, tables and joins etc.

  2. for VO 2 of his works fine, but 1 of the VO throws exceptions.

  3 cross checked EO to VO to PageDef, throughout all the way all the attributes and references exist.

  4 BC4J Tester works fine, no exception for the VO above with NAV and Associations etc.

  Anyone falls on this?

  (CE mark as answer since I resolved the issue and I managed to progress)

  Subramanian

  Thanks for the elaborate response.

  I want to answer all of your questions, but I managed to deal with that, ok. nothing smart or technical, what I did is recreated a new (exactly the same thing until the last attribute of layout) create VO, LIKE, VL and declarative added page, exactly how I did before, that's his work... to be honest I never thought that it will work.

  Now, this behavior triggered a few other questions: -.

  1. I created 2 sets of features exactly the same way and it works and is not another?

  2 can we do something with the new JDeveloper 12 c?

  3. If this type of behavior will happen at the average / towards the end of the development, I can't recreate / restart never time, due to the complexity of the feature?

  Any thoughts?

  See you soon,.

  Saran.

• "I get this started" error loading winera32.rom the specified module is not found.

  When windows starts, this message appears "error when loading winera32.rom the specified module is not found". the rest of the windows works fine.

  It's a malware. It has been removed from your AntiVirus Scanner and registry entries are always present to start the malicious program at startup.

  Start regedit.exe and search (F3 or CTRL + F) for winera32.romand remove all the entries that you find.

  For more safety, perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• An error occurred when querying for the pending operations

  Original title: sysprep problem
  I have an acer aspire 5738Z, I use windows 7 (64 bit) I try to open sysprep.exe and it does not open, a text box appears saying "an error occurred when querying for the pending operations. What can I do to fix this?

  Hello

  Thanks for posting the request in the Microsoft community forums.
  I understand that you receive the error "an error has occurred when querying for outstanding operations" when trying to open sysprep.exe on the computer.

  You can try the solutions provide and check if it helps solve the issue.

  Method 1:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the steps above fail then you can try the steps and check.

  a. run regedit by typing regedit in start search by pressing ENTER.
  b navigate to the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
  Key: RegistrySizeLimit
  Type: REG_DWORD
  Value: 0xffffff (4294967295)
  c. reset.

  If you need help with Windows, keep us informed. We will be happy to help you.