Error creating - snapshot operation is not allowed in the current state

Similar Questions

• "The operation is not allowed in the current state" message when you delete the folder

  I'm test ESXi 5.5 and mounted a datatsore of oriented export NFS in an attempt to redirect my ScratchConfig at this place. I found that I can create a folder in the datasore NFS fine but when I try to delete it, I get a message saying "the operation is not allowed in the current state. This happens on any of the files/sub-sub-sub-folders and only used account's root - I also confirmed that these directory drwxr-xr-x permissions.

  As suggested by KB1003829 which is a bit useful, but not really, I restarted the management on the host agents but it made no difference. Has anyone else seen elsewhere?

  I got this resolved, stumbling on the good guid for the NFS data store. Only after clicking around in WinSCP and realize that the NFS data store guid secondary, shorter - I then tried again to remove the original test directory and it worked.

  On a separate but similar note, then I tried to update my position zero config by applying this same guid with the command "vim - cmd hostsvc/advopt/updated updated ScratchConfig.ConfiguredScratchLocation string vmfs/volumes / [guid] / logs" (followed by a restart of the host) and it worked also.

• vSphere HA is inside in vain. Operation is not allowed in the current state.

  Hello

  I'm testing vSphere HA with two hosts ESXi in my lab. I have a VM on each ESXi host and when I try to open HA by closing the port connection from the switch to one of the hosts, the cluster of vSphere tries to failover of the VM on the host failed to another host, but he is not successful.

  The events under the Cluster gives this warning:

  vSphere HA switched in vain < VM - > < Home > cluster < cluster name>. vSphere will try again if the maximum number of attempts has been exceeded. Reason: The operation is not allowed in the current state.

  Screenshot of the error is attached.

  I tried to restart the service of server vCenter and that did not help. What could be wrong here?

  Thank you.

  Shivani

  Hello adel.

  Do not disable the HA data store. If you have a physical server just power the server by pulling the power plug or just it crash. If you have virtual server vESXi, and then directly 'Power Off' there instead of the stop.

• Unable to connect to the MKS: the operation is not allowed in the current state

  Hi all

  After the upgrade of vmware tools, we have a problem while safeguarding a guest vm with avamar. VM freezes and he said; "Unable to connect to the MKS: the operation is not allowed in the current state.  It can be stopped only by killing the task in the service on the host esx console.

  VMware vCenter Server 5.1 - 5.1.U1b - 1235232

  2013 12-19 T 00: 49:15.146Z | vCPU-1 | W110: MONITOR PANIC: vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | I120: Core dump with construction build-1065491

  2013 12-19 T 00: 49:15.156Z | vCPU-0 | I120: Exit vcpu-0

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | W110: Writing monitor corefile "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmmcores.gz".

  2013 12-19 T 00: 49:15.202Z | vCPU-1 | I120: Save the anonymous memory

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | W110: Dumping core for vcpu-0

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: VMK battery for vcpu 0 is 0 x 412248155000

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:16.454Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | W110: Dumping core for vcpu-1

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: VMK battery for vcpu 1 is at 0x4122481d5000

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:17.420Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:17.421Z | vCPU-1 | W110: Dumping extended monitor data

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | W110: A core file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmx-zdump.000".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: Msg_Post: error

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: fatal error [msg.log.error.unrecoverable] VMware ESX: (vcpu-1)

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.haveLog], a log file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmware.log".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.withoutLog] you can ask support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.vmSupport.vmx86]

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + to collect data to be submitted to the technical support of VMware, run 'vm-support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.response] we will respond on the basis of your entitlement to support.

  We realized that the problem is our url filtering service checkpoint firewall. When we have disabled all begins to work very well.

• the operation is not allowed in the current state

  I have vm havea which leaves me not add more than 2 GB of ram. whether its hotadd or cold Add.

  ESX host has a lot of memory and no limits were set on the virtual machine.

  other virtual machines on the same host can add memory.

  This virtual machine is mounted on this host because of vmdirectpath

  This is a problem caused by the need of the reservation and the current HA admission control configuration. Defining a reservation for a virtual machine will increase the size of the slot and so reduce the number of places available in the HA configuration. In this case you may need to reconfigure the control admission HA parameter and change failover "cluster of chess hosts tolerate" by a percentage. Usually 100/number-of-hosts (for example 25% in a cluster of 4 guests).

  André

• When you use Device.device.os, it throws error #1079: native methods are not allowed in the loaded code.

  Hi all

  When I tried to use the Device.device.OS to get the string from the bone. It is compiled smoothly. But it throws error when the application started on my desk.

  Error #1079: Native methods are not allowed in the loaded code.

  It does not error in the emulator, but he did not get the chain of the OS.

  Someone knows how to use the device class? Is it still not currently supported?

  Thank you very much!

  Error #1079: Native methods are not allowed in the loaded code.

  This error is thrown on the desktop because your qnx - air.swc is probably in the process of fusion as code instead of being tied to your project as external. The reason who need to be external is that it contains classes that exist in the execution of AIR in the Simulator and not in the AIR runtime on your desktop. The device classes use the custom air extensions we wrote to get the properties of the device.

  If you want just the operating system, you can also use the Capabilities.os, which is a standard API Flash Player and does not require the use of custom extensions.

  My guess on why it does not work on the device thus is that the qnx - air.swc is not defined externally. Return to externally set and run it in the Simulator.

  Hope that helps

  Julian

• Subtract operation is not allowed on the parking METER, INTEGER operands to appeal

  I'm running a weird problem that I've defined a formula in the RPD to calculate the service life. When I bring this column with any other column made it gives me error: subtract operation is not allowed on the parking METER, INTEGER operands to appeal
  
  But if I set the same calculation in answers using the formula edit column it works very well. I need to define in the SPR for the column to be present for ad-hoc. Where is my mistake?
  
  Definition of the answers: case when "job events (Previous). "Rental Date #1" > ifnull ("job events (Previous)" "." ")" Date expression","job events (previous). "Rental Date #1") then cast (floor (case when "job events (Previous)". "))" "Rental Date #1" > ifnull ("job events (Previous)" "." ")" Date expression","job events (previous). "Rental Date #1") then the case when 'Employment events (Previous)' "." " Rental Date #1 "is not not null then TIMESTAMPDIFF (SQL_TSI_MONTH, 'Employment events (Previous)'". ")" Rental Date #1 "(, CURRENT_DATE) ELSE NULL END ELSE NULL END 12) as char) |' year (s) ' |" Cast (Mod (case when "job events (Previous)" "." ")) Rental Date #1 "> ifnull (" job events (Previous) "". "") " Date expression","job events (previous). "Rental Date #1") then the case when 'Employment events (Previous)' "." " Rental Date #1 "is not not null then TIMESTAMPDIFF (SQL_TSI_MONTH, 'Employment events (Previous)'". ")" Rental Date #1 "(, CURRENT_DATE) ELSE NULL ELSE NULL END, 12) as char) |' months ' end of another null"
  
  
  SPR: case when "Core". «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "' End Date ', 'basic '. «Fact - job events ".» "Rental Date"(-1) then "
  Cast (floor (case when "basic".)) «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "' End Date ', 'basic '. «Fact - job events ".» "Rental Date"(-1) then "
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END/12) as char) |' year (s) ' | Cast (Modcase what of"basic". «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "' End Date ', 'basic '. «Fact - job events ".» "Rental Date"(-1) then "
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END, 12) as char) |' months '
  otherwise null end
  
  Help, please!

  Try this: -.

  case when "Basic." «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "" Date of term ", TIMESTAMPADD (SQL_TSI_DAY,-1,"Core". "Fact - job events". "" Rental Date"))
  then
  Cast (floor (case when "basic".)) «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "" Date of term ", TIMESTAMPADD (SQL_TSI_DAY,-1,"Core". "Fact - job events". "" Rental Date")) then
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END
  ((/ 12) as char) |' year (s) ' | Cast (Modcase what of"basic". «Fact - job events ".» "" Date of hire "> IfNull ('Core'. «Fact - job events ".» "" Date of term ", TIMESTAMPADD (SQL_TSI_DAY,-1,"Core". "Fact - job events". "" Rental Date")) then
  case when "Basic." «Fact - job events ".» "' Rent ' is not null then TIMESTAMPDIFF (SQL_TSI_MONTH,"basic". «Fact - job events ".» (' ' Hiring date ', CURRENT_DATE) else null
  end
  Another null
  END, 12) as char) |' months '
  otherwise null end

• A SQL server management studio 2012 error: PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  Our company just upgraded to SQL Server Management Studio 2012 and it has been very useful because I needed to use the percentile for the code I wrote. As a first step, the function did not work because I set the compatibility mode 110 level. After that I did, the function worked. However, now it does not work yet, and I get the same error:

  The PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  I went to the properties of database section, then options and noticed that the compatibility mode has not changed, it is set to "SQL Server 2012 (110). I even used the following code to see if that would help at all even if the compatibility mode is already on this mode:

  ALTER DATABASE Analytics
  SET COMPATIBILITY_LEVEL = 110 
  

  Someone already had this problem or knows if I need to change something in the properties of database for this function work? Is this just a bug in the new version?

  Hello

  I suggest you post this question in the SQL Server 2012 TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/sqlserver

  Thank you.

• vmrun return "this operation is not supported with the current permit.

  Hello

  I just installed the 5.1 esxi and I have 2 vm windows works well.

  I use the vSphere client to manage the hypervisor.

  I have not installed vCenter stuff, so it is just bare hypervisor os.

  When I ran the following:

  «vmrun t h 10.10.0.9:443 u vpxuser Pei xxx list esx»

  He returns with "this operation is not supported with the current permit.

  In fact, I have installed esxi5 on hypervisor licensing, do not know why I get this error message.

  Access the esxi5 through the sphere client works very well (I could create vm, take snapshots, etc.).

  Please let me know if I missed any steps. Thank you

  -antony

  Welcome to the community,

  with the free license of the hypervisor, access to vSphere API is restricted, which is most likely causing this issue. To unlock the API, you must have a paid license. Unless your host has already exceeded the 60-day evaluation period, you could try to revisit the evaluation mode to see if the command works as expected.

  André

• States, how to access the components not included in the current state?

  I have two State put in place for my application. I have a creationComplete triggering my init function and a lot of listeners are then added here and there throughout the app. The only problem that I am running is that an element is not included in the default state, but I'm trying to add a listener to this component on my init function, and it gives me a runtime error stating that the component (which is not included in the default state) is a null object.

  How can I force this component is instantiated when the application is created?

  My best guess was to put a creationPolicy on 'something' to instantiate components "all".

  Thank you!

  See the section "Creation of Custom and Destruction policies ' of this specification:

  http://opensource.Adobe.com/wiki/display/FlexSDK/enhanced+States+syntax

• [Fatal error]: 1:1: content is not allowed in the prologue.

  When Analyzer of Java XML - one you get:

  DocumentBuilderFactory f = DocumentBuilderFactory.newInstance();
  DocumentBuilder docBuilder = f.newDocumentBuilder();

  Don't like what it is fed during an analysis, you see the message above on the console.
  
  Why in the world someone take it upon themselves to do and not to pass this as an Exception instead? If you happen to be watching the console (the unlikely to the programs on the server), you never know you have a problem.
  
  I saw this problem everywhere on the web, but the responses were on the way to correct the XML. I'd be interested in how fix the parser so that it allows us to know the problem. (I'd also be interested by twisting of the ear of the programmer who has done this, but this isn't the question :).
  
  Does anyone know how I can 'catch' these error messages?
  
  Thank you
  
  Kevin
  
  Published by: KevinRyan on November 16, 2010 06:14
  
  Published by: KevinRyan on November 16, 2010 06:27

  DocumentBuilder #setErrorHandler ()?

• vmrun start leads to a "error: operation failed because of the current state of the system.

  Hello

  I am running the vmrun like this on the console command.

  / usr/bin/vmrun t CR h https://ourhost/sdk u ouruser Pei ourpwd start ' build001/build001.vmx [datastorename] '.

  I get the error text:

  Error: The operation has failed because of the current state of the system
  

  When I opened the Vsphere client, I see that the operation began, but also with an error: the operation is not allowed in the current state.

  I'm running on VMWare Vsphere Server Version 4.1.0 Build 258902

  How can I make sure via command line that the State of the system is correct. Is there a way to get corrected through an order status?

  When I try to power to the top of the image within the user interface, it works, but I need to know the opposite effect.

  Thank you.

  Hello and welcome to the forums.

  check via the State of the line of command of this virtual machine if necessary, unblock the process using vmsuport x how to show in this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004340 Ko

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• "The operation is not allowed" error when you click on the SUBMIT"" button.

  I created a form in Acrobat 9 with a "submit" button in order to send the entire form by e-mail.  Under the export format, the PDF the complete document option button is selected.

  The submission is a hidden button until the user presses a button (accepting a warning in the codument; irrelevant); then the Send button appears and can be clciked on. It works very well

  It seems to not work on some browsers MS Internet Explorer or Reader 9 and will return the error "the operation is not allowed.

  The URL field is defined as

  mail to: [email protected]

  On Safari (MAC) browser, when you press the option button to display the Send button, the Send button at all.

  Any ideas?

  I have no idea about the appearance on the MAC, but submit with drive problem, it's that you must enable the form for readers to submit the entire form. There is no need to submit the entire form as FDF or XML data files are easily import the form in Acrobat. The problem with the activation of the rights of the reader, is that you are limited by the license to 500 copies. If you get more than that, you're violating the license. You can negotiate with Adobe if you plan to spend for a substantial sum. If you do not enable the rights of the player, then people should have no problem with the submission (with the exception of any mail problems - a danger of using electronic submission) and you would not have a problem with the license.

  It would be useful to know if you have created the form in Acrobat or Designer. There are significant differences.

• Another beginning... "" This operation is not allowed?

  Hi everyone - I hope someone can help.  I created a form in Acrobat Livecycle and when I go to preview it in. PDF, I get the error (informative) message "this operation is not allowed.  I press the 'ok' button and things go as usual.  I can't have this error message appearing all the time, but for the life of me I can't understand what talking about 'Operation' Adobe!  Where can I get the details behind the information error message?

  I'll be happy to send the document to someone who may be able to help me

  Replace your button a button of 'Normal '.  In object Panel of the button set control Type of shipment (in the field tab) and then (on the tab submit) value submit it as a PDF and send it to the URL to the email address:

  mailto:[email protected]? subject = applications filed to the Leadership Cayman