Error database that can be updated windows detected 0x8007000D - not been fixed in Windows 8.

Original title: slow startup and commissioning, also blocks windows 8

My computer began to take 10 minutes to start and run. then hangs every now and again when I use it.

I had problems installing an update and I thought that was the problem, so I followed the instructions and installed the update (KB2855336) on a clean restart. When I put the settings back to normal reboot I see the update succeeded, but the computer is still a good 10 minutes to restart.

I tried to do a repair, but this is notauto-start.

I tried to run a sfc/scannow and that froze the verification step 100%, I have waited a long time, checked in the Task Manager and saw that he was inactive and if you click end task.

My Task Manager shows 99% or 100% use of the disk.

I tried to do a system restore to a point in mid-July and which failed, error 0x80071a90 code.

I followed the advice of someone to uninstall the update and restart twice, but the problem persists.

What can I do to fix this? I use my laptop to work and so I need this problem as soon as possible.

I just tried in safe mode and also it took forever to start and run. I tried different jumpers in safemode, maintenance of the system not found no problem, windows update however found two:

Error in database that can be updated windows detected 0x8007000D - not fixed

Windows Update, the components must be repaired to no fixed

Help, please!

Thank you

Hello

This problem is usually caused by Windows Update corrupted downloads or installations. However, virus infections are also known to cause this problem. Before scanning for viruses, please try these troubleshooting steps and check whether the problem is resolved:

Method 1: reset the Windows Update components and check if the error persists:

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

Method 2: use Deployment Image Servicing and Management to fix Windows Update errors.

To do this, follow these steps:

a. press the Windows key + C and type cmd in the Search box.

b. right-click on command prompt and select run as administrator.

c. type these commands and press enter after each:

DISM.exe / Online/Cleanup-image /Scanhealth

DISM.exe / Online/Cleanup-image /Restorehealth

d. close the command prompt, and then run Windows Update again.

Please get back to us with the State of the question.

Tags: Windows

Similar Questions

  • Error database that can be updated windows found 0 x 80070490. access to the path "C:\windows\softwaredistribution" is denied. »

    Original title: error in database that can be updated windows found 0 x 80070490

    When you try to repair windows update on my rt surface I get the following error message - "error in database that can be updated windows found 0 x 80070490.  repair windows update the database, access to the path "C:\windows\softwaredistribution" is denied. "Any help?

    Hello

    Welcome to the Microsoft community.

    It seems that you are facing problems trying to fix Windows update. We're here to help. It would be great if you can answer the following questions:

    1 have had any changes made on the computer before the show?

    2. Why are you trying to repair Windows update? Are you facing problems during the installation of the updates?

    To resolve this issue, follow these methods:

    Method 1:

    I suggest you follow these steps to run the Windows update Troubleshooter:

    a. open Control Panel.

    b. click on Troubleshooting.

    c. click show all in the left pane of the screen.

    d. in the list of options, click Windows update.

    e. click Next and follow the on-screen instructions.

    Method 2:

    I suggest to refer to the article and try to run the system update readiness tool:

    System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    If you are always faced with the question, please answer and we will be happy to help you.

    Thank you.

  • I got this after my laptop 'stuck' and I had to restart everyting = "Basic error of data that can be updated windows found 0 x 80070490"

    My laptop 'stuck' and windows wouldn't load, I had to restart everything (I'm not a technophobe!), on the fact that he told me that I needed to update back to 8.1.

    However, I could not do this as he told me that I had to update windows 8 first of all - but update will not work.

    What do I do on Earth?

    http://support.Microsoft.com/kb/958044/en-us

    Windows Update, error 0 x 80070490

    Step 1: Use SFC system to repair damaged Windows files use System File Checker to repair damaged Windows files. To do this, follow these steps:

    1. Open an elevated command prompt.
    2. Run the command "sfc/scannow".
    3. Try installing the update again.

    For more information about the System File Checker tool, see using the tool File Checker system to repair missing or corrupted system files

    (http://support.microsoft.com/kb/929833)

    . Step 2: Run the DISM tool if the problem persists, use the Deployment Image Servicing and Management (DISM) tool to fix corrupt Windows Update errors. To do this, follow these steps:

    1. Open an elevated command prompt.
    2. Run the command "DISM.exe Online/Cleanup-image /Restorehealth".
      Important When you run this command, DISM uses Windows Update to provide the files that are necessary to fix corruptions. However, if your Windows Update client is already broken, use a Windows install running as the source of the repair, or use a Windows side-by-side folder from a network share or removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:

      DISM.exe / Online/Cleanup-Image /RestoreHealth / Source: C:\RepairSource\Windows /LimitAccess

      Note Replace the placeholder C:\RepairSource\Windows by the location of your source of repair. For more information about using the DISM tool to repair Windows, refer to a windows repair Image

      (http://technet.microsoft.com/en-us/library/hh824869.aspx)

      .

  • Error Windows Update Database that can be 0 x 80070490

    Original title:

    Update of Windows, Java and some problems

    Hello

    My Java and Windows 8 will not get automatically updated.  When I go to all the work this symbol [[[comes in. I have updated Java, nevertheless a message shows to update when I put a cursor over any word of an open page of the internet. I have troubleshooted illustrated message"

    Error Windows Update Database that can be 0 x 80070490

    Miniport Wan (Network Monitor) # 2 has a driver problem

    Windows Update configured to never install drivers '  

    Some keys on the keyboard do not work.  How can I fix these problems?

    Hello Arif,

    Thanks for posting your query on Microsoft Community forum.

    If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that is needed to install updates is corrupt.

    Try it out below mentioned methods and see if it helps.

    Method 1

    Try to follow the steps mentioned in the article below.

    Windows Update, error 0 x 80070490

    Method 2

    Try to run the Troubleshooting Windows Update tool.

    This utility is used to and check if the network card and Windows Update services are running properly.

    Problems with installing updates

    Try other steps mentioned in this article if the issue that you are facing is mentioned in one of the mentioned option it.

    Method 3

    If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

     

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • Can't update windows like systems to give me an error that it cannot find a file and he needs me to insert the media.

    Original title: re install windows 8.1.

    I have problems with my computer and want to re install windows 8.0. I had upgraded my computer windows 7 to windows 8 but can't update windows like systems to give me an error that it cannot find a file and he needs me to insert the media.  I insert the windows disc 8, but the system indicates that it is not the correct information.  He is looking for another disc?  I created a recovery usb drive, but that doesn't seem to help.  I feel that I have completely new install windows 8 but I am nervous of course think I mess up something.  given that this computer was originally shipped with windows 7, I have to use the recovery discs I've done initially or is there a way to create new ones with the new windows 8?

    Hello and welcome!

    If you are using a CD to upgrade of Windows 8, then there not all reinstall the files included for a full Windows.

    Your best option is to use the recovery partition on your hard disk or the recovery CD from your PC back to Windows 7. Then Windows 7 SP1 upgrade and get all updates. Then, move to Windows 8 again.

  • I can't update windows. I get error 0x8024D007

    I can't update windows.  Under XP.  He's trying to download updates but will not continue to the web page.  I get error 0x8024D007.  What can I do?

    I can't update windows.  Under XP.  He's trying to download updates but will not continue to the web page.  I get error 0x8024D007.  What can I do?

    Not knowing what you tried to do so far to remedy this, here are my suggestions...

    Make sure that your time and time zone are set correctly.

    If you are not on the level of service pack 3, you need to get there.

    Go through the following, in order, as needed.

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Try to get updates.

    If it still does not work, try this...

    1. Start an elevated command prompt.
    2. Run the following commands pressing on enter after each line:

      net stop wuauserv

      CD %SystemRoot%\System32

      Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

      net start wuauserv
    3. Reset
    4. Try to reinstall updates


    * Important *
    the following issues occur when you perform this operation:

    • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
    • When you remove the Software Distribution folder, your download history is deleted.
    • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.


    * Note *
    if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  • Why I can't update windows and fail. and the error is 0x8007001F

    Why I can't update windows and fail. and the error is 0x8007001F

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    and/or

    Claire on your temporary internet cache.

    and/or

    Rename the folder C:\Windows\SoftwareDistribution

    Click Start, choose run.
    In the run box, type services.msc.
    Click OK.
    Right-click the automatic updates service.
    Click on stop.
    Stopping the service will take a moment.

    Rename the folder "C:\Windows\SoftwareDistribution":
    a. Click Start, click Run, type %any and then click OK.
    b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
    c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

    Click Start. Choose run.
    In the run box, type services.msc.
    Click OK.
    Right-click the automatic updates service.
    Click Start.
    Starting the service will take a moment.

    Restart if necessary and try and update again.

    You will notice that you will lose your history of updates, but it's not important.

    If everything works well again, you can delete the old renamed folder.

  • I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

    I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

    Hi kriplurr,

    Thank you for keeping us posted about the State of the question.
    I'm glad you are able to run the updates.
     
    You can download the Windows Installer under the following link and check.
    Windows Installer 3.1 v2 (3.1.4000.2435) is available
     
    Or you can download it directly at the following link.
    (a) click on the above link.
    (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
    (c) install and check.
     
    Hope this information helps.
  • For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

    For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

    U44... Update error http://forums.adobe.com/thread/1289956 can help

  • Error code 80070032 trying to update windows Vista

    Error code 80070032 trying to update windows Vista Hi I forgot I'm doing an update of windows & cant I disc clean up as well as other tasks that can do?
    can you help me please? Thank you please hurry my e-mail address below
    E-mail address is removed from the privacy *.

    ERROR_NOT_SUPPORTED 80070032
    Failed to create the directory or file

    Is this a sudden, new problem or a course?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • SE 8024008 error when you try to update Windows Vista 32 Service Pack 1 to Service Pack 2

    Hello

    This Dell Inspiron notebook running Windows Vista 32-bit Service Pack 1 and Windows Vista stopped editing about a year ago.  I just got the Service of update to start working again, a sort of...
    However, when I tried to update to Service Pack 2, it gave me error 80246008 and when I tried the link to fix, Services did not show the background BITS Intelligent Transfer Service () in respect of the services, so I followed the suggestions of Jose Antonio Ponton Posada CEO and tried the repair tool valid my Windows Vista 32 BIT and run the tool , but he said that repair BITS is not required on this computer.
    I checked the State of the Windows event log, and it was running.
    Please tell us how can I update Windows Vista Service Pack 1 running on this computer for the current Service Pack.
    Thank you
    Roxy111

    To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-vista-update-service-failure/b89bca27-9739-4bde-9f6c-a57ade14781d

  • Error 0 x 8007005 seeking updates Windows

    Original title: Windows Update errors & problems

    I'm checking the updates of windows and I get error 0 x 8007005. What should I do to fix this error, so I can check updates?

    Hi Tanishabradford,

    1. were you able to check the updates before with no problems?

    2. you will remember to do recent changes on the computer before this problem?

    You can read the following article and try the steps and check if that helps:

    Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

    http://support.Microsoft.com/kb/968003/en-us

    Note: Applies to Windows Vista.

  • Can't update Windows Live Messenger version 2009 14.0.8089

    Can't update Windows Live Messenger 2009 version14.0.8089

    You will find support for Windows Live Messenger in this newsgroup (at least for the moment):http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.windows.live.messenger

    And in the Windows Live Messenger Support Forums (News March 8, 2010)
    http://windowslivehelp.com/forums.aspx?ProductID=2

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I can't update windows xp sp 1 PC to sp 2 or 3

    I can't update windows xp.  I had to restore original windows service pack (sp1).  However, when I try to update windows I can't connect to the windows update site.  I tried to update manually for windows xp sp 3, but that wrong on.  Can someone please?

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure
    http://support.Microsoft.com/kb/875364

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    http://taurarian.MVPs.org/WU_XP/0x80240036_0x8024400A.html

  • Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMo

    Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMovie?

    Error message #1: these applications cannot be accepted by your Apple ID. These applications have already been assigned to another Apple ID, and they will be available in this list of purchases Apple ID. If you don't have access to this Apple ID and would like to receive future updates, you will need to purchase applications.

    Error message #2: update are not available with this Apple ID. This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

    Error message #3: we could not complete your request. There was an error in the App Store. Please try again later. (null)

    Unfortunately, free updates are available to the original purchaser of the computer. The iMovie is locked to his Apple ID, so unless you have to grab his ID, you can buy iMovie.

Maybe you are looking for