error detection of 2103 on ssd0 (m2)

Similar Questions

• Remote Desktop - due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected

  Original title: Remote Desktop

  I get strange messages when trying to do Remote Desktop (and also connect using Logmein). Sometiems I get this:

  Due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected.
  Try to reconnect to the remote computer.

  Sometimes:

  Due to an error in data encryption, this session will end.
  Try to reconnect to the remote computer.

  For Logmein, I just get a mismatch. I'm running Windows 7 Pro sp1

  Can someone help here?

  Hi Peter,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

• Constant error detection - dialog box - Interactive Services

  Starting this morning, that I was bombarded by a dialog box "Interactive Services Detection" - I have never heard of the program and am not sure what to do with it. Him will disappear for minutes about 10 close the dialog box or if, at which it will then return. I got a bluetooth or error detection warning this morning as well (I didn't see what he says before he went).

  I'm running Win7 x 64 on an Alienware Laptop - I've run Mcaffee, as well as a few other security programs and nothing came up with a security issues - so I'm guessing that it is actually a windows program (although I have not heard of it). I went through some of the sites from Microsoft and Google and have yet to find all the information about what the parent program is, what it does, how to disable, etc.

  I bought this new laptop about 6 months ago and this is the first time I have encountered this particular error dialog box /-I do not install, download or change programs recently (within the past, minimum week). So I'm a bit puzzled as to why it rises now - no change in my system. So if someone could provide some help/literature on what this program, it's program of parents and any matter relating to this fact, is, etc. and if this program is actually a virus or a simple program and what I would do with it (delete, repair, etc.) would be greatly appreciated.

  > Win 7 x 64

  > Computer laptop Alienware

  > Most if not all of the drivers, updates, etc. downloaded and applied

  > Router wireless, Bluetooth printer/fax(not connected to this laptop)

  Thanks in advance!

  For more information on the detection of Interactive Services:
  http://wiki.blackviper.com/wiki/Interactive_Services_Detection

  More on Blog MSDN (Microsoft Development Network):
  http://blogs.msdn.com/patricka/archive/2010/04/27/what-is-interactive-services-detection-and-why-is-it-blinking-at-me.aspx 
  Itknowledge24.com

• Error detected while trying to perform the work

  Hello world

  
  

  One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred: error detected while trying to perform the work

  
  

  When I went to Essbase, I found that when I launched the rule an error pops up:

  
  

  ERROR - 1006059 - invalid block header: illegal block type - please use the IBH Locate/Fix utilities to find or fix the problem of IBH.

  
  

  I read it could be a problem with corrupt blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could give me a help?

  
  

  Kind regards
  

  IBH errors when there is an incompatibility between the .pag file and the index file (.ind). In other words the file pag and .ind file are not synchronized.

  run it separately in maxl

  change the HYPCOLAN database. Invalid_block_headers repair COSTS

  Still the error ibh, then reload metadata and data backups and try to re start batch Scheduler.

  After re - run batch Scheduler the same problem persists, then

  1 save the relational tables of demand in 11.1.1.3

  2 backup essbase objects (rul, otl, CSC, rep)

  Planning enforcement

  (A) create a new planning application

  (B) restore all the 11.1.1.3 relational tables in the newly created application application

  (C) to restart the Services

  (d) copies of objects like .csc, rul, .rep in db (excluding the .otl)

  (e) re - import the data into db

  (f) to run batch Scheduler

  Or you can make use of LCM method

  Try also to optimize your planning applications

  Kind regards

  Sreekumar heraud

• Internal error detected, cannot generate the eBook (11 Robohelp)

  Hello

  I'm new to Robohelp (I've been a user long term of Framemaker for print publications).

  The generation of Ebook of the carrycot single Source Layout has stopped working and I get this message: internal error detected, cannot generate the eBook (11 Robohelp eBook preprocessor 11.0.0.179)

  Compilation G:\Development\Course Development\CONE-online\Characteristics-of-light\Robohelp\Characteristics-of-light\Charac light\ Ta! SSL! \eBook\! epub_tmp_folder_0\Characteristics_of_light. EPUB...

  Preparation create eBook...

  Compensation output folder...

  Preparation of files for eBook...

  Copying files...

  Updating files...

  Finish the preparation in 4 seconds

  Initializing the compiler...

  Generation of output - eBook eBook Manager (11.0.2.240)...

  Transforming XHTML topics...

  About XHTML preparation "Questions_about_light.xhtml"...

  About XHTML preparation "The_Electromagnetic_Spectrum.xhtml"...

  Preparation of subject XHTML ' Using_wave_properties/Interferometry.xhtml '...

  Preparation of subject XHTML ' Using_wave_properties/Mach - Zehnder_modulators.xhtml '...

  Preparation of subject XHTML "Using_wave_properties/The-wave-properties-of - light .xhtml"...

  Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/ITU_bands.xhtml '...

  Preparation of subject XHTML ' Wavelengths_and_Frequencies_in_optical_networks/Light_sources_and_wavelengths.xhtml '...

  Preparation XHTML topic ' Wavelengths_and_Frequencies_in_optical_networks/Wavelengths_and_Frequencies_in_fibre_opt ics.xhtml '...

  Preparing to Table of contents...

  Output EPUB 3...

  EPUB 3 output generation failed.

  Internal error occur, could not generate the eBook.

  Could someone give me advice on what to do to fix? What have I done? I tried to install Adobe digs Eds 4 and it seems stop working after that, but I tried to uninstall that and it is always the same. I also tried to reinstall TCS5. Reactive out of HTML5 still works ok.

  Thanks in advance,

  Sarah

  It could be a longshot, but try to move the project to a place where the path is shorter. I had a similar problem (I think I got the same error a few months ago, but I can't be 100% certain), where the epub was not able to generate, and I tried to move my project to another location where the path to the files was shorter. This solves the problem for me.

• Size of incorrect Page or error detected in Live Preflight Orientation

  Wednesday, November 10, 2010 12:16:40 PM PST

  I am preparing a newsletter created in Adobe InDesign to send to a printer in Germany.  This is the first time I send a document to the press since her arrival in Germany in February and the first time since upgrading my computer and software for:

  MacBookPro: Model 5.3

  Adobe InDesign: version 6.0.6

  Adobe Acrobat Pro: version 9.4.0

  The size of standard paper in Europe is "A4", slightly larger than the size of our 'letter '. Document has been implemented a 'A4' size of the document. A4 is also selected in the print menu.

  Webcam live Preflight shows "size incorrect page or orientation" and wrote:

  Required: 612 PT. x 792 pt.

  Current: 595,276 PT. x 841,89 pt.

  FIX: Choose File / Document configuration to specified the required page size.

  I tried to change the format of the document to the 612 x 792 'compulsory', and the document was tight in the smallest space, ruining the formatting of document! I have undone the damage and looked further for the preferably incorrect setting.

  There is a wrong setting somewhere, but I can't.

  Distiller rejects the document and does not generate a PDF file. The only other errors detected upstream are from the RGB color space.

  All InDesign Menu print and PDF generator preferences settings are set for A4 format, yet Preflight insists on the fact that the Document

  Size and Orientation are incorrect and suggest to change the size to 612 PT. x 792 pt.

  I also noticed that when you configure the PDF file, I did not check "Optimized for Fast Web view," but when I generated the PDF, it "optimized for fast Web view." It seems that there is some preference somewhere is the substitution of my selections. But where...? !

  I was able to generate a PDF from InDesign (without Distiller) and the printer has been able to use the PDF file.  I learned to always use distilled when sending files to printers and to "Pack" the files.  Is there some risks by sending files without using Distiller?

  In addition to the question of size and page orientation, Europe has different standards for space colors and ink printers also. I would be grateful if someone could shed some light on how I should adapt to European standards.

  I was disappointed that Adobe has offered only paid a pension, even if I bought Adobe CS4 less than a year ago. For a pricey

  product, I think that assistance would be available for a minimum of one year.

  ...??? This message to distill indicates you throw your InDesign file on it. Distiller can only distill the PS files.

  Why not use export to PDF?

• Edge e530 - 2102 error: error detection in HDD2 - press ESC to continue

  Hallo,

  The last two days, I get this error 2102: error detection in HDD2 during each cold and hot start. It appears even after a complete shutdown for overnight and the next day to start. In addition, the shoe itself became very slow - white screen shows until it appears the Thinkpad logo, followed by which the error message.

  Thanks for the pointers!

  PS: I looked into the community to find similar errors - only couple found and no solutions.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------

  ThinkPad Edge E530 - i5 - 3210M - upgrade 8GB RAM - 750 GB, 16 GB mSATA Booster of HARD Disk Performance

  This error comes from the BIOS, it means that something is wrong detecting mSATA SSD.  It can point to a hardware problem.  It is certainly not a software problem.  I call the helpline in your country and ask what they recommend on this subject.

• T530, 2101: Error detection on HDD2 (Sata Mini)

  I started to get this error every time that I reboot my machine. If I press boot ESC is going very well.

  Whats strange is that I watch have a Mini Sata HDD2 and if I do that I've never known about it and I can't put it in the Device Manager, etc..

  How can I get the machine to stop trying to detect this? Very annoying.

  Hi guys,.

  Thanks for the replies. This message was made four months or if there is, and the problem is now resolved. IBM came and replaced care mini sata on the bottom of the laptop. I had no idea I had this card at all, I was not using it. Unfortunately, the message went to replace.

• Think error detection HDD Pad X 230 2100

  Hello, always get HARD drive detection error after that computer go mode "Eve".

  2100: HDD0 (main HARD disk) detection error

  Protected by bitlocker, Win8 Pro system HARD drive. Intel SSD has been verified by intel software control: without fail, latest firmware.

  How to solve this problem?

  Should I change drive under warranty?

  Thank you

  Forward

  I had this with an mSATA M5M Crucial SSD, and the solution was to turn the machine off for 20 minutes with no battery and no power connected, then try again.

  The reader is not quite about 2 weeks later if.

• Windows 7 PE USB, CD/DVD driver required error detection not

  I try to install Windows 7 Home Premium with a USB 2.0 with the placed using Rufus .iso image file. -Sha1 hash is checked if the .iso image file is not corrupted and I get the infamous error of necessary the CD/DVD driver. However, any USB I put in any port is not recognized, when I go to browse. All that I can see is the boot X:\ drive, nothing else, so even if I get the drivers on my USBs they will not be detected at all. I tried to move the USBs to different ports, nothing helps. The USB ports work because my keyboard works, so what's the problem?

  Motherboard is MSI Z170A Gaming m5, trying to do a clean install of Windows 7 on SSD, but it won't let me even go beyond the section missing drivers. Extremely frustrating.

  What I ended up doing was turn off all other bootable devices on my bios and install an MSI tool called win 7 smart tool that installed the drivers on my USB in case children, everyone has the same problem. I do not know how fix it actually since I applied two patches at the same time, but I guess that's the thing about the pilot.

• Drive hard error detected on the HP Pavilion dv6835nr with Vista Home Premium bits

  Lately, my laptop has been slow to start. Yesterday, after control electronic, I noticed the screen turned black and only 3 icons were visible: Trash, Firefox and File Recovery... And a lot of small cascade titled windows: System message. and a file recovery window appears and scans to find out the necessary repairs. The message is "your computer is in critical condition. Hard drive detected error. "7 questions of repair, the next screen offers to upgrade my 'demo' (don't have the slightest idea what they're talking of)

  When I click here to activate it, they want to buy such a product.

  Is this a scam or a virus? How can I fix this problem.

  HP Pavilion dv6835nr

  Processor Intel Core 2 duo T5550

  with 250 GB HDD

  3072 MB DDR2 SDRAM

  Please help me...

  Hello:

  Yes, you should try it but do not for get rid of the virus. The drive is bad, but you can try to recover the files you want to keep using this disc.

  The GUI will allow you to explore your hard drive and if there's still life in it, you may still be able to see and copy your files to a storage device portable usb.

  If the Kaspersky Rescue CD cannot access your hard disk, then all is lost.

  Things to consider... dv9000 models are plagued by questions of the motherboard and you can opt for a new PC, rather than fixing you.

  I do not work for HP, so I don't have to think that you buy a new laptop, but you have to consider the possibility of throwing good money after bad.

  If you decide to buy a new hard drive, you can get a 7 200 RPM one which has better performance on a disk of 5 400 rpm, but it shorten the time between charges of battery a bit.

  You will also need to buy a set of recovery disks.  Info to do this is on the link below:

  http://support.HP.com/us-en/document/bph07143

  If you can still read the Vista product key 25 character on the bottom of your laptop, you can also make your own Vista installation DVD.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• SQLPLUS is not the error detection

  Hi all

  I recently came across a script that has not been tested properly and she experienced an error that sqlplus not found.

  Here is the example:

  SQL*Plus: Release 11.2.0.1.0 Production on Thu Nov 12 11:50:18 2015
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>
  SQL> update emp
    2     set comm=1
    3   where empno=7369
    4
  SQL> commit;
  
  Commit complete.
  
  SQL>
  

  As you can see, the update failed the semicolon at the end or the slash on the next line and the update statement does not run.

  Is it possible to avoid this problem (part write correctly and properly test the script)?

  Kind regards.

  Alberto

  > I was wondering if there was another way to detect these errors. Apparently not.

  It was * not * a mistake, which is the point.

  Sqlplus begins to accept several lines of code until complete you the statement with a semi colon, or run the buffer with a slash.

  Until the first word is a valid keyword in Oracle, it will continue to accept the lines until you enter a blank line.

  Sqlplus has no way to 'know' what your intentions are.  It is not also analyze your sql statement line by line as you type.

  SQL > select

  2 blah blah blah

  so forth and so 3

  4

  SQL > commit;

  Validation complete.

  However, you CAN enable sqlblanklines

  SQL > set sqlblanklines on

  SQL >

  SQL >

  SQL >

  SQL > select

  2 blah blah blah

  so forth and so 3

  4

  5 engage;

  blah blah blah

  *

  ERROR on line 2:

  ORA-00923: THE KEYWORD not found where expected

  Or in your example:

  SQL > update emp

  2 set comm = 1

  3 where empno = 7369

  4

  5 engage;

  Commit

  *

  ERROR on line 5:

  ORA-00933: SQL not correctly completed command.

• Pavilion 23-q055na: hp not pavilion no noise at all, but no error detected by the operating system

  I installed Windows 10 on a brand new Pavilion - HP 23 - Q055NA and now no sound at all.

  Troubleshooting Windows Audio will return no error, the device drivers for each of the sound systems say they are up-to-date and 'works '.

  Device-> Manager

  The inputs and outputs audio

  Speakers (Realtek High Definition) Audio Driver Date 07/09/2015 Version 10.0.10240.16384

  Audio, video, and game controllers

  -CyverLink WebCam

  -Intel (RR) Audio display: 24/10/2014 Version 6.16.0.3160 driver Date

  -Realtek High Definition Audio: Driver Date10/08/2015 6.0.1.7580 Version

  The latest windows updates were installed: there was a problem with one, a reboot loop, but after power off the computer, which has disappeared, the computer has been updated and restarted again.

  I ran the update from the HP support and had some 6.0.1.7584 for Realtek Audio driver that fixed my problem

• Computer connect using wpa2-psk, but wifi error detected every 20 seconds.

  I have xp sp3 and belkin F7d4101 game adapter, I can connect using wpa2-psk, but wifi protected setup will work not (error found). If I can't use wifi how it stop coming every 20 seconds.

  Also the adapter can't access all of my computer or the command prompt. I get to connection 17, bulbs work but the wifi light flashes. (2 lights).

  Any help I can get I would be gratefull.

  I do not have a web cam, I figured out that in the House use a different configuration. It won't work.

  I'm connected because I answer, the adapter, I can't see what about that, I have it plugged into the usb port and it works. I'll try to delete everything on it and start again, but I can't access it from the command prompt or windows workstation.
  I fixed the wifi window to come every 20 sec with user profile Hive Cleaner and windows zero CONF. fix, I do not know who did the trick but it closed the window boring and stopped my wireless to modify different config (or earlier).

• MSG for error detection of dialogue of interactive services, C:\Windows\System32\spoolsv.exe

  I constantly get an error message that an application requests an execution it unusual way.

  Microsoft Visual C++ Runtime Library

  Program: C:\Windows\System32\spoolsv.exe

  Recently had a Lexmark technician solve some printing problems.

  Hello

  Is the error specific to execution of any program or is this random?

  Please follow the links below to solve the problem.

  Method 1

  Try to leave you is clean boot computer in order to eliminate the causes as interruption of third party software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2

  Run a file system Checker to verify system files corrupted.

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  Method 3

  Remove temporary files in the folder of spool.

  a. click on start

  b. type Cmd (right-click and choose Run as administrator before you open the program)

  c. Type or copy paste the following command

  net stop spooler (press enter)

  d. navigate to C:\Windows\system32\spool\PRINTERS
  e. delete all files with the following extensions
  
  *. SPL and *.shd

  f. copy - paste the following command in the command prompt window
  
  net start spooler (press enter)

  Now restart and check if you receive the same error message.

  If the steps above do not in normal mode, and then repeat the method 3 in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this helps