error "device could not be calibrated" to PXI-5105

Hello

I want to calibrate my PXI-5105. But I get an error in MAX and a calibration vi. I tried to install NO-SCOPE 4.1.3 on PXI, but that does not solve the problem. I have labview time real 13.0.1 installed. I enclose the error messages.

See you soon,.

Syed

Syed,

So there is not a lot of good information on this error.  Automatic calibration works by connecting a known signal that is embedded in the digitizer at the ADC and to adapt the constants and phase shift.  The 234107 error means that there is a problem with this calibration signal or the signal to the ADC path, etc.  This known signal is calibrated during the external calibration and since your device is off external calibration (calibration necessary since February 2011), the problem is probably the calibration signal drifted too far from its known value.

To resolve this problem, you will need to send the jury in external calibration, and I would recommend National instruments, send it because if there is a problem with the hardware with the Commission, we might be able to solve this problem, as well as of him have calibrated.

I hope this helps.

-Nathan

Tags: NI Products

Similar Questions

  • vSphere device instant Reversion fails: A general system error occurred: could not remove change tracking file

    Many people, I'm a little in the soup this time!

    My goal is to improve of vSpere 5.0 to 5.5 has. I have the new device ready to go, but the old device just not show me the upgrade tab. Because I had already taken a snapshot, I thought that I would give to the 'update' a go. Then I changed my mind and tried to go back to the snapshot and received the error in the title:

    A general system error occurred: could not remove the file change tracking.

    I wonder if there is a difficulty, I can try to get back to a good functioning device 5.0 before I retry upgrade - or if I should just set up my new 5.5 a device from scratch. I use only 3 guests on more Essentials.

    Thanks for all the tips!

    If he has only 3 guests, I will deploy a 5.5 device costs.

    Concerning

    Girish

  • Device could not start - Code 10 - Intel Wireless Card on NB550D

    Hello world

    It's just a normal Toshiba NB550D netbook

    The only thing I change is the card inside Wireless: the original is an Atheros common half mini card. Recently, I have the urge to use internet in 5 ghz (frequency).

    So, I decided to replace the old with the * half mini card Intel Wifi Link 5100 AGN *.
    It turns so well. The pilot is not recognized or specifically the windows tries to install the driver but FAIL is reported. Device manager tool shows a "!" next to the network adapter and when I go the properties on the general tab: "* the device could not start - Code 10."

    I tried many ways to uninstall the driver and reinstall it again; also tried to download the drivers from the website of toshiba for the network card intel.

    Nothing works so far and yes I don't know what to do now.

    The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm.

    Please help me solve this problem. I really need to use two strips (2.4 and 5 ghz) internet.
    Appreciate any help!

    > The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm

    Regarding the error code 10:
    http://support.Microsoft.com/kb/943104/en-us

    + The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. +

    I put t think deliver its wireless network card might be a compatibility problem between the BIOS and the wireless network adapter.
    All devices are supported by the BIOS.

    But the WLan card already appears in Device Manager and so I think that there should not be a BIOS compatibility issue.

    Have you checked if the chipset would properly address the Wlan card?

  • I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.

    I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.

    Hijimm

    Please make sure that you have the correct version of Camera raw installed and that you use a camera supported supported by Camera Raw devices check the raw version of camera you have help > on Photoshop(Photoshop>>About Photoshop on MAC)

    Check by using Updates.Select > updates (from bar of menus in Photoshop)

    Or manually install here Adobe - Photoshop: for Macintosh: Adobe Photoshop CS4 11.0.2 update - multiple languages

    Adobe - Photoshop: For Windows: Adobe Photoshop CS4 11.0.2 update - multiple languages

    You can check this thread for the other Possible solution

    Also move this thread of Discussion General bridge in Photoshop General Discussion

    Concerning

    ~ Assani

  • Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

    I can't get my Age of Empires 2: Age of Kings drive on my computer.

    It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

    What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

    Help, please!

    What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

  • I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

    I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

    What is your operating system and Service Pack?

    What is your anti-malware?

  • I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. »

    I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage.  You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows?  Y at - it an easy fix?

    Have you tried to manually install the hotfix by clicking on it, and as an administrator?

  • Error 1606: Could not access network location % APPDATA%\.

    I am trying to install a game for Windows: Zoo Tycoon 2 Ultimate Collection (which is Zoo Tycoon 2 + 4 expansion packs), on a Vista Home SP2 machine.  When you install disc 1, I almost immediately get the error above,Error 1606: could not access network location % APPDATA%\. I looked at the error on this forum, who led me to the installation page for the installation package located manual download page offline at the: http://www.java.com/en/download/help/error_installshield.xml. When I tried to install the offline installation package, I got the same error, 1606.  I don't know what to do next?  This game comes without a product key, this support won't even take my call.  Thank you-

    This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

    The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

    Here are the steps to fix it.

    1. click on start, run, typeregedit in the Open box, and then click OK.

    2. look for the following registry key:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

    3 remove the entries that show the path that is listed in the error message.

    886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

    Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

    Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Game Top Spin 2 ERROR 1402 could not open key

    I try to install the game Top Spin 2, but I have the problem with the Error 1402.Could not open key: UNKNOWN/components and more numbers.

    Any solution for Windows XP?

    Contact technical support anywhere where you bought the game.

  • I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

    I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

    Hi Leif,

    Where do you get this error message?

    I suggest you to follow the steps and check if it helps.

    Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

    http://get.Adobe.com/reader/?promoid=DINRS

    Method 2: If the problem persists, perform a system restore and check if that helps.

    How to restore Windows XP to a previous state

  • Error message: "could not cop files. Make sure that the target disk is not dead", during the installation of the drivers scanner Epson Perfection V500.

    Original title: the scanner driver update problems.

    Problem: I am trying to install a driver for an Epson scanner update.  I get the error message: could not copy files.  Make sure that the target disk is not read-only.

    I'm running Windows XP Home edition.  Scanner is an Epson Perfection V500 Photo.

    What I did:

    • A release with the support of Epson.  They tell me that I have the admin rights.  However, I am the administrator and log on as administrator
    • I downloaded the epson driver update, which is an executable zip file.  I right-click on the file, select Run As..., opt to run it as an admin user, enter my password and select run.  The files are decompressed, but at some point in the installation, I get the message "couldn't cop files.  Make sure that the target disk is not read-only.  (Target is C:\)
    • Furthermore, I installed this driver successfully on my other computer that is running Windows XP Professional

    Why not copy the driver files?

    Hi Passport35,

    You can try the following steps and check if it helps.

    Method 1:

    You can try running the fixit article and following cjheck, if it helps.

    Diagnose and solve the program installation and uninstallation problems automatically

    Method 2:

    If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

    a. click Start, click Run, type cmd in the Open box and then click OK.

    b. at the command prompt, type sfc/scannow, and then press ENTER.

    Note: the scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Wait for the analysis of complete and then check if you can install the drivers.

  • _ ERROR 1402 could not open Key__ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\OptionalComponents\MSFS__

    When I try to download the latest update to Adobe Reader, I get the following error message:

    ERROR 1402 could not open key
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\OptionalComponents\MSFS

    I searched this error on the Adobe Reader website and they said to uninstall the current version of Adobe Reader on my computer with the command install/uninstall via the control panel - I tried to do, but the I get the same error message when I try to uninstall my current version to reinstall.  I'm so caught up in a "catch 22".  I really need to know how to correct this error so that I can update/install this program.

    Thank you

    Sandi

    sandib5532,
    Try to use The Windows Installer Cleanup utility and see if it is able to remove your current version.  Alternatively, you can consult the Adobe removal instructions.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error 1402 could not open key HKEY_Local_Machine\software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

    Error 1402 could not open key HKEY_Local_Machine\Software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

    We have solved this problem by granting explicit permission at the same time "domain users" and "domain administrators" you can plug in "domain" in the field and the search for the users and select them.  But this solved the problem for us.

  • install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

    having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

    error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

    I managed to install the software on my laptop using windows 7.

    spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

    have tried to install it on the internet from the site of epson, but same error

    any help would be greatly appreciated

    < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
    Do you mean that you have downloaded the Epson driver?

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

    Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

    If that wouldn't work, try to run the System File Checker:

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
    http://support.Microsoft.com/kb/929833?WA=wsignin1.0

  • Error 2738 could not access VBScript Runtime for custom action

    Well, I have the same problem error 2738 could not access VBScript run time for action custom when I try to install incredimail I just do a restore to factory in the last 2 days I do not even have all yet loaded things back and I came across this problem so here is my contact information and what I tried already :

    I'm running Windows Vista Home Premium Service pack 2 32 bit
    I use Mcafee and installed and after reading just down to you ensure that I uninstalled and ran the cleaner program suggested and she has still not work, I reinstalled and not yet did not work so I've currently uninstalled again and the vacuum again 3 times
    I ran all the advice from the command prompt still does not work
    I tried to delete the registry entry suggested HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}, but he's not here to remove
    I ran this command suggested reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8} and I think that maybe it wasn't a good idea but may not know whether it was or not.
    Then I read in this thread on Mcafee to a registry entry and redirecting somewhere it should not so I went to look at and that's what I found:
    HKEY_CLASSES_ROOT\CLSID\ {B54F3741-5B07-11cf-A4B0-00AA004A55E8} \InprocServer32 - default REGSZ C:\Program Files\Fichiers Files\McAfee\SystemCore\ScriptSn.20110417221023.dll
    and no I have not yet reinstalled McAfee and ran to the 3 times vacuum why is there always a register McAfee entry I followed the path C:\Program Files\Common Files\McAfee\SystemCore\ScriptSn.20110417221023.dll and guess what it's not exist, and yes I looked into the hidden files I even ran a search in all files and it is not anywhere
    I had already run the sfc/scannow once before I deleted the McAfee and it found corrupted files, but said they have been fixed as well, I ran again just to check and this time no errors
    HELP, I am at a loss of what to next in addition to another factory restore which I really really DON'T want to because I have an I had my computer since February 2007 as well as the amount of updates to Vista I need to do well is all together besides the Service Pack 1 and 2 there are more than 300 reviews have even not looked optional and yet if pardon my language is a pain in one @.
    Please can someone HELP!

    Whoo Hoo!

    Someone told me how to change the permissions on the registry key and DUH! I knew how to do this, so I changed the and then changed the key to C:\Program Files\Common Files\McAfee\SystemCore\ScriptSn.20110417221023.dll TO C:\\Windows\\system32\\vbscript.dll
    Restarted checked and then ran the installation for incredimail and IT WORKED!
    Thank God I've been playing with this for 2 days I really doesn't want to have to do another restore of factory which is what I was about to

Maybe you are looking for

  • Problems of El Capitan

    Since the installation of El Capitan, I am unable to load or update Adobe Flash Player (revision 21).  My Mac Mini appears to perform the installation, telling me it was a success and asks me to restart my browser (Safari 9.1).   When I try to use th

  • driver card reader?

    model-hp2000-450 caWindows 7 Edition home premium 64I installed the new hard drive, found most of the drivers to get my internet working.  I use my laptop for photography and my card reader does not work, stopped reading. worked before the new HD.mus

  • Graph of the complex number in plan of Argan

    I need help to make a graph with Phasers current in three-phase network voltage and... I have a graph of the complex numbers, but I want an arrow in the end, to represent a vector.   rsduarte

  • Someone hacked into my Hotmail account and now I can't access my e-mail address.

    original title: my hotmail has blocked. Hello my hotmail account has recently blocked due to someone me hacking and sending spam from my account. the account is old enough, and with the current information, I account it says that I don't know enough

  • BlackBerry Z10 mobile internet tethering with Z10 and my laptop?

    How can I use my Z10 as modem wireless for my laptop. The feature is part of the BB desktop but I do not see the link for BB. Thanks Brian