Error "disk Management console view is not updated" on Windows 7 64 bit

Hi team,

Is my laptop model Dell Studio XPS 1645

Operating system is Windows 7 Professional 64 bit

Size of HARD drive internal 500 GB

I got 4 partitions initially, 1 for the C drive and remaining 3 storage purpose. I took the backup of all Partitions of sup 3 and then I tried to combine these 3 partitions sup in one partition but I get following error. I refreshed and restarted my system so many times. Kindly help me with this problem.

Hello

I suggest to follow the steps indicated by Arya S Asok in the link given below and then check if it helps.

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/the-operation-failed-to-complete-because-the-disk/4662593a-4AF0-4834-BE27-351ef9d26776

Let us know the status of the issue, we will help you.

Tags: Windows

Similar Questions

  • The operation did not complete because the disk management console view is not updated.

    Disk title management error: Windows 7 original by adding a drive letter
    Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

    "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

    Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

    I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

    Thank you

    Methadras

    Just to follow and finish this, the old MAIN drive has had some problems and was

    continues to worsen, it ends up by crashed.  scannow revealed some Windows system

    Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

    and did a restore of the system since the disks created with the purchase and restored the system to

    "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

    Adding external or internal disks worked without any problem now.

    I created a Windows 7/64 system repair disc.

    I created an Image of the system.

    I have a backup plan.

    I do the scheduled backup.

    I learned a lesson...

    Joe_T45

  • View of the Disk Management Console is not updated.

    I use win 7.
    I tried to change the size of the disk by using the magic of the partion and it failed. He asked me about a wrong address, and I click on continue (I guess he's changed the logical address).
    Now I can't see my partion (D) to the workstation.
    When I run windows disk management and try to change the drive letter, it is said: "the operation failed to complete because the disk management console view is not updated. Refresh the gwendoline by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »
    I tried with windows Diskpart to mount the partition but I can't. If I have the volume list, it shows me only (C), but if I list the partition, then it shows me all the 3 partition:
    Partion 1: OEM
    Partion 2: primary
    Partion 3: primary
    but I can't access partition 3.

    Hello faithful,.

    Have you tried to use other third-party programs to "manipulate" the discs?  It seems that even if Palcouk $ million question with is it compatible, so I shot to the top of Partition Magic site and see the this PM 8 is not compatible with Windows 7.  I would try to see if you can access the partition from the command prompt, but I promise that would work.  Have you created a backup of your data before you do?

    I would say go to the link below and post a question with the community to see if you have viable options to recover from this.

    PartitionMagic 8.0 system requirements

    http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004050716123662?open&docid=2004050712232662&NSF=PowerQuest.nsf&view=6c360f88152ecfce88256e91005066ac

  • Cannot change the drive letter. Obsolete disk management console.

    Original title:

    Help me please. I'm so sad

    my score is not see the...

    I have a problem, I ask you to solve

    I have suffered from an attempt to repeat to restore my driver context

    Please I want a solution to restore my files that were on this context

    and here

    What should I do

    I don't want to run out of data

    Please I want a solution

    big THX Microsoft

    Please take a look at the following links:

    http://support.Microsoft.com/kb/2001877

    http://social.technet.Microsoft.com/wiki/contents/articles/19472.Windows-Server-the-operation-failed-to-complete-because-the-disk-management-console-view-is-not-up-to-date.aspx

  • After effects CC 2015 viewer is not updated after ctrl + z

    After that effects CC 2015 viewer is not updated after ctrl + z.

    I have a simple rect form I've tried to convert using transformations Rect or transform effect. All working and trying to look at Ctr + Z does not change.

    Its impossible to work.

    The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

    Details: http://adobe.ly/1QqMMc6

    Let us know how things work after installing the update.

  • I get the message 0x8007043C error code when I try to get updates for windows xp.

    I get an error message when I try to get updates for Windows XP 0x8007043c. For windows installer pop shows I'll click on it and then I got error handler and also I'm being arrested when I am trying to download things directly, it's a virus than other od are picking up my security programs, is there something I can do? Any help would be appreciated.

    The options provided below may help you solve the problem.

    I quote Maurice N ~ MVP - a regular contributor here:

    This give a try.

    Start button > select RUN > type of services. MSC

    The following services are required by the Windows Update process.

    In the services (services.msc) management console may NOT be * Disabled * in the startup type.

    They show a manual or automatic startup type.

    Here are services and their startup types:

    Background Intelligent Transfer Service (BITS) manual

    Automatic encryption services

    Remote Procedure Call (RPC) automatic

    Restoration of the automatic system of Service

    Another suggestion: browser in Internet Explorer > main menu Tools/Options Internet > Security tab / click the Green Trusted Sites icon / click Sites.

    Click 'require a server secure (https :) for all sites in this zone' to * clear * the selection.

    In the ' add this Web site to the zone: "field, add these entries to the list of"Trusted Sites"- type

    http://download.windowsupdate.com    (click to add)

    http://windowsupdate.Microsoft.com

    http://update.Microsoft.com

    Click OK. Apply the changes.

    Also, make sure that you are connected with administrator rights when you access Windows Update.

    UTC/GMT is 09:00 on Tuesday, June 12, 2012

  • Could not update to Windows 8.1 0xc1900101 - 0 x 20017

    I am on Windows 8 on an Acer TravelMate 5730 and decided to take the plunge to upgrade to 8.1 Windows. Reboot, I received the following message: "could not update to Windows 8.1 0xC1900101 - 0 x 20017. What is the 0xC1900101 - 0 x 20017 error?

    I lost many times that I tried to install Windows 8.1, always for the same message. I searched the forums and my laptop rebuilt despair, assured all the drivers are up-to-date by downloading the software update driver and all the updates of Windows 8 have been installed. Has anyone in the community of the ideas on the problem or issue?

    Concerning

    Malcolm

    Hi Malcolm,

    This error message is displayed when there is a driver problem. Since you've already done so that you have all the updated drivers, I would suggest trying the following steps and check:

    I first suggest you remove all the devices connected to the computer with the exception of essential devices such as the keyboard and the mouse, and then start the computer and check.

    Method 1:

    If you have installed a third party such as antivirus/firewall program security software, they can interfere with the download. I suggest to temporarily disable and check if you are able to download the update.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    If the problem persists, I you suggest to start the computer in a clean boot state and then try to download and install. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

    http://support.Microsoft.com/kb/929135

    Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

    Note: We sent you a private Message, asking for log files continue to troubleshoot the issue. Please respond to the private Message with the requested information.

  • My CS5 Master Collection does not update on Windows 7. Help me CC. How can I link programs and update them?

    My CS5 Master Collection does not update on Windows 7.

    I tried to link programs to my creative cloud account, but they are listed as previously recorded.

    How link apps/programs and update?

    The Adobe update program download files and fails to install.

    I checked the firewall and used to download updates manually, but everything I've seen try to direct me to CC.

    Who would be perfect if CC recognized my product approved and authorized updates.

    @

    Help appreciated

    CS5 is not supported by the CC.  You need to manager updates separated from CC.

    Direct updates
    -----------------

    CC updates: https://www.adobe.com/downloads/updates/

  • Questions-will not update to Windows Update

    Says he needs the Update window to install same Microsoft Fix - It! The only problem is that it will not update to Windows XP - so I'm going around in circles. I just do a repair of the operating system/charging and it's happening now! Can someone help me?

    Thnaks a lot

    Please note that Windows XP is no longer supported by Windows Update until you install Service Pack 3.  This will be the State of affairs from now until April 2014, when to end all support for Windows XP and no other updates will be available.

  • I get error code 802000D when I install the updates of windows. How can I fix this error?

    I get error code 802000D when I install the updates of windows. What this mean and how can I solve this problem? Please answer. Thank you.

    Hello

    ·         Did you change your computer before this problem?

    I suggest to reset the Windows Update components and check if it works.

    See article:

    http://support.Microsoft.com/kb/971058

  • Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

    Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • I uninstalled photoshop cs6 on my machine Windows Pro 8.1 for Windows 10. Now I want to reinstall it because I decided to not update to Windows 10. How can I do?

    I uninstalled Photoshop cs6 on my machine Windows Pro 8.1 for Windows 10. Now I want to reinstall it because I decided to not update to Windows 10. How can I do?

    Download the installer: download Creative Suite 6 applications

    Enter your number of series and if requested in the case of an upgrade, your qualifying serial number.

    Launch Photoshop CS6 and activate.

  • Brother printer has not detected by Windows 7 64 bit.

    Brother DCP145C has not detected by Windows 7 64 bit. What port is recommended for the local printer - LPT1? Windows 7 should detect when the USB connection, but there is no activity. Similarly, the mode to scan on the printer is not responding to "check connection". Thank you.
    Checked the port LPT1 and COM on Device Manager and seem to work correctly. No updated driver needed updated port.

    Hello Richard,.

    If several USB devices are plug-and-play, printers need a print driver to work even on a USB port. I went to the Brother website and a research on the model of printer "DCP145C" increase any responses - are you sure the model number of the printer (not the part number)?

    You have a printer disk supplied with your printer? If you do, try to use that to install the print driver. As far as LPT1 goes, is for a printer with a parallel port (printer), and the COM ports are for those who use the ports series.

    Thus starts with the right model number and look for brother.com right print driver (or use the disc that came with the printer). Try and see if that solves the problem for you.

    Let me know how you fare.

    Kind regards

    BearPup

  • Solution Center does not correctly install Windows 7 64 bit

    I've looked everywhere on the forum about this but still do not have a resolution.

    I have a HP Photosmart C7280, I've had two or three years.  When it is connected to an XP machine it worked fine.  I have since bought a new PC running Windows 7 Home Premium 64 Bit, and although I tried over and over, install, uninstall and reinstall the software from the HP Solution Center, I can't work.  I really need to have the feature analysis of the Cluster Solution that I need to scan documents up to 100 pages.

    Is it possible that this software is not compatible with Windows 7 64 bit?  I downloaded the software later on the site of HP and my PC works always the latest updates of Windows 7.

    If I can't get this resolved, I'll have to buy a new printer all-in-one and believe me it will not be a HP this time.  Help, please.

    Please see below for more details.

    Here is the log of the error:

    Here's a sceenshot of the error:

    I followed the steps listed below and have had no luck.

    Click the Start button and type %temp% term or search programs and files of field

    Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

    Step 2 - download and extract to your system:

    1. Download latest features full software and drivers for your printer from the link below:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-71555-3&cc=us&DLC=en&LC=en&...

    2. once the download is complete, double-click the file to extract the software.

    3. once the extraction is completed, and the installation window opens, press the Cancel button to stop the installation

    4. click on the Start button and type %temp% term or search programs and files of field

    5 find and open, starting with 7z folder (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window (all your open windows), then in the middle of the desktop right-click of your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/?promoid=JZEFT

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Well I'm done chasing my tail.  It is clear that this is never going to work.  I tried to do the installation on another machine in 64-bit Windows 7 (gateway GT5228) which was a clean install and never had a HP product installed on it before and she's not exactly the same way.  I also tried a XP operating system installation and it works beautifully.  So my conclusion is that developers at HP simply no interest to this provision on Windows 7 64 bit, or they are simply too incompetent to make it work properly.  I am a software consultant in real life, and I do installations on servers is not as if I'm inexperienced.  I decided to buy another printer, but after this experience, it will not be a HP.  It is not just that a printer that works very well mechanically must be thrown on the junk-pile because the software cannot be upgraded successfully.  HP is not very favourable to the environment, creation of garbage where it could be avoided.  Sad and disappointed.

  • Smartphones from blackBerry Torch 9800 not recognised by Windows 7 64 bit laptop

    After 2 years of working perfectly my Torch 9800 is not recognized by Windows 7 64 bit laptop - now says 'USB not recognized by Windows device'. Thoughts?

    Hello and welcome to the community!

    First question - what has changed on the computer just before this change in behavior that's happened? An update? A new application? A new anti-virus application? Nothing at all? Carefully because any change on the computer can be causal.

    It can be also the port USB of your computer has not... have you tried others?

    You can also consider a re - loading BlackBerry Desktop software... If Yes, then I suggest this thread:

    It begins with a process to start properly and there is an exchange of views, and there is also a post (15) with links to earlier versions of the Software Desktop, if those who are needed. Note that this is not, by any means, guaranteed to work... but it worked to much to solve the problems they have.

    Good luck!

Maybe you are looking for