error during recovery

Similar Questions

• Volume \Device\HarddiskVolumeShad... encountered an error during recovery

  Hi, I got this error in the event viewer:

  The resource transaction on \Device\HarddiskVolumeShad volume manager... has encountered an error during recovery.  The resource manager will continue recovery.

  Only from google, is your error? - http://www.eventid.net/display-eventid-134-source-Ntfs-eventno-10844-phase-1.htm

  If so, backup your data now and then a full disc check error may be trying to see if it finds problems

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  IF you can provide more information, including the number of the event real, are complete you any specific task when the event occurs etc, someone can be able to give more specific advice.

• Satellite A210 - error during recovery

  Hi all

  I received a Satellite A210 (opportunity, about two years old) by a friend. The laptop does not work at the moment. When the laptop is turned on, it displays a message "Missing Operating System". I tried using the recovery disk supplied with the machine, but it doesn't help. I get the same message "error restoring image."
  ERROR = ImageX would not apply VISTA F = \05853XSP.swm Index 2 of ODD to C =------! Press a key to continue, and it is as he goes. Currently a une machine machine second hand, that I don't know what works and what does not.

  Any ideas on where to go from here would be much appreciated.

  Hey Buddy,

  I never had an error message during the installation of recovery so I m not sure what the reason for this problem.

  Have you checked the BIOS? Is the drive recognized properly it?

  What happens if you try to install Windows from a Microsoft installation disc?

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• Equium L40 - error during recovery

  I need to recover my Toshba Equium L40 running Vista.

  So I put in the disk that come with the laptop when I got it, he began to do what he needed to do, I have chosen the language and press next and then Next again, then a BACK screen appears and begins to do things, this only getts so far and then stops and appears with errors and then after a while it's just closes the window BACK. I try to start the computer laptop nornmally but now I can't do same.

  What can I do to fix this?

  I am confused with this choice of language. Language is not editable and you must leave just already marked language.
  Can you continue with the installation of recovery if nothing is changed?
  Do you use a recovery media for the first time?

• Equium A210 - Diskpart error during recovery

  Hello

  I am recovering an Equium A210 to factory condition. I run the recovery utility and select the default settings. I get an error in diskpart and the recovery process stops. This I what it shows:
  "
  Try to remove all possible partitions on the HARD disk letters 0...
  Try to remove all the possible partitions on 1 HARD drive letters...

  Microsoft DiskPart version 6.0.6000
  Copyright (C) 1999-2007 Microsoft Corporation.
  On computer: MINWINPC

  Disk 0 is Noah the selected disk.

  DiskPart succeeded in cleaning the disk.

  DiskPart has encountered an unexpected error.
  Check the event log system for more information about the failure.
  ERROR: DiskPart failed!
  Press a key to continue...
  "
  How can I check the system event log when I have no way to look like the HARD drive has no operating system present.

  Any help and advice would be great.

  I don't really know what the problem is there but, if possible, get Microsoft Vista DVD facilities to see if you can install Vista correctly.
  If yes then there is something wrong with the recovery image files. If this isn't the case, I assume that there is something wrong with the HARD drive.

  Sorry, but that's all I can say at the moment.

• Error during recovery on Qosmio G30

  Hello

  I'm trying to recovery my Toshiba Qosmio G30 computer laptop (PQG31A). At the end of the restore process (15 seconds to finish), I get an error code 10E7160017 and instructions click OK to shut down the computer.
  I put the boot on CD/DVD first sequence (before that I didn't that I loaded the recovery CD now button 'C' and the same error came in halfway through the installation).

  My BIOS version is 1.4. I tried to install latest BIOS (v 3.60) last, but the program downloaded from the toshiba Web site States that my computer is not supported.

  Any ideas? Help, please!

  Thank you

  Nick

  Hello

  I Fund this thread on the message error 10e7160017
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22596

  A guy, he fixed by updating to the latest version of the BIOS and turning off the power and hard drive passwords.

  About you update the BIOS;
  You must first select the G30 series right from the page of European driver of Toshiba.
  I checked the page and there are various series G30. So choose the right ;)

  Bye and good luck

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• RMAN recovery failed with the incarnation of target of error 03002,11003 and recovery 19906 changed during recovery

  Hi all

  I was cloning a Prod DB (Oracle 10.2.0.5) from tape backup. So the cloning is going on it failed with the below error in RMAN:

  archive log thread = 2 sequence 23044 = filename=+DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.848348137

  output channel: ch01

  output channel: ch02

  output channel: ch03

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 23/05/2014 20:15:48

  RMAN-03015: an error has occurred in the script stored memory Script

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' +DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.84

  8348137'

  ORA-00283: cool cancelled due to errors

  ORA-19906: embodiment of changed during recovery recovery targets

  Any possible solution to the resume and cloning complete successfully?

  Kind regards

  Ritu

  incarnation of the list;

  It listed 2 incarnation. I have reset the previous incarnation

  RESET DATABASE TO INCARNATION 2;

  and recovered again and it solved my problem.

  After that added temp files as usual after failing RMAN duplication;

  After this nest of DB and open reset logs.

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck

• SL500 new w / XP - failure internal error creating recovery disc

  I tried several times to create my Windows XP Recovery disk set (license is for Vista with downgrade to XP).  Whenever I get this error during extraction of the files operation: internal year error has caused this process to fail.  This occurs also during "create rescue media.  How can I fix?  Is there a file that can be downloaded?  I really need to create my discs of recovery, just in case... and I do NOT put upgraded to Vista.

  Any help or assistance will be greatly appreciated

  Ann

  Call lenovo support Office, explain your problem and ask you to send a Rescue and Recovery disk free.

• PROBLEM WITH SHORTCUT - fatal error during Installation

  I seem to have trouble downloading anything.  I am trying to download iTunes and after download is successful - I clicked on the icon on the desktop (& Start Menu) and Windows Installer comes up - said his tent to configure iTunes... after a minute or so... appears a fatal error during installation.

  In the efforts to solve this problem - I installed the Windows Installer Clean Up and the SAME thing happens.

  It seems that something is blocking me to download anything.

  All my updates window are updated.

  Any help would be greatly appreciated.

  Thank you!

  Hi 08twinsmom,

  You run the computer as an administrator?

  I suggest you try the following steps:

  Step 1: Delete the Temp folder

  To clear the temporary files folder, follow these steps:

  1. on a computer that is running Windows Vista, click Start, type % temp % in the box start the search in the list and then click on Temp programs.

  2. If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  3. on the Edit menu, click Select all.

  4. on the file menu, click on delete.

  5. When you are prompted to confirm the deletion, click Yes.

  Step 2: Check if the Windows Installer Service is started and Auto value

  1. click on start-run, type services.msc, the, click OK.

  "2. when loads Services window, navigate to the" " " Windows Installer Service ', double click on it to open it,

  3 make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.

  4. If he once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  Now check if the problem is resolved

  Step 3: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below that relates to a similar question:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error during reconfiguration (at 96%)

  Hello

  I'm trying to convert a physical Windows 2008 std server in a virtual machine, using the vCenter Standalone Converter, but I always get an error to 96% of the conversion process. The error that I see on the "Log highliths" part of the window that says "error: an error during reconfiguration.» ".

  I exported the newspapers from the last test, which I am placing below:

  2013 09-18 T 20: 54:47.968 + 03:00 [info 02448 'Default'] [user, 890] successfully authenticated the user administrator

  2013-09-03:00 [error 03600 "Default"] Found dangling SSL error + T 18, 20: 54:48.390: error:00000001:lib (0): func (0): reason (1) [0]

  2013 09-18 T 20: 57:55.248 + 03:00 [info 02160 "Default"] connection to host on port 443 10.2.8.2

  2013 09-18 T 20: 57:55.248 + 03:00 [info 02160 "Default"] at localVersion is: vim.version.version7

  2013 09-18 T 20: 57:55.279 + 03:00 [info 02160 "Default"] remote version is: vim.version.version7

  2013 09-18 T 20: 57:55.295 + 03:00 [info 02160 "Default"] root user authentication

  2013 09-18 T 20: 57:55.357 + 03:00 [info 02160 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res

  2013 09-18 T 20: 57:55.357 + 03:00 [info 02160 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool

  2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res

  2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter

  2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] vim VM root folder. Datacenter: ha-datacenter is vim. File: vm-folder-ha

  2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] reuse existing connection of VIM to 10.2.8.2

  2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  2013 09-18 T 20: 57:55.389 + 03:00 [info 02160 ' vmomi.soapStub [6]'] adapter reset for Server TCP:10.2.8.2:443 heel: closed

  2013 09-18 T 20: 57:55.389 + 03:00 [info 02160 "Default"] connection to host on port 443 10.2.8.2

  2013 09-18 T 20: 57:55.389 + 03:00 [info 02160 "Default"] at localVersion is: vim.version.version7

  2013 09-18 T 20: 57:55.420 + 03:00 [info 02160 "Default"] remote version is: vim.version.version7

  2013 09-18 T 20: 57:55.436 + 03:00 [info 02160 "Default"] root user authentication

  2013 09-18 T 20: 57:55.498 + 03:00 [info 02160 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  2013 09-18 T 20: 57:55.514 + 03:00 [info 02160 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res

  2013 09-18 T 20: 57:55.639 + 03:00 [info 02160 ' vmomi.soapStub [7]'] adapter reset for Server TCP:10.2.8.2:443 heel: closed

  2013 09-18 T 20: 57:55.639 + 03:00 [info 02160 "Default"] created a new element of planner with id = '2', firstTimeToRun = '20:57:55.389 2013-09-18', source = ' ', targetRPOInMinutes = '0 '. -__thiscall Converter::Server:Scheduler:SchedulerItemImpl: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/schedulerItemImpl.cpp:87")

  2013 09-18 T 20: 57:55.639 + 03:00 [info 02160 'Default'] point planner with id = '2' created - __thiscall int Converter::Server:Scheduler: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:49")

  2013 09-18 T 20: 57:55.639 + 03:00 [info 02360 "Default"] Scheduler scheduling pos.2 executing time = 20:57:55.639 2013-09-18. -Sub __thiscall Converter::Server:Scheduler:SimpleScheduler:Run (void) ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/simpleScheduler.cpp:109")

  2013 09-18 T 20: 57:55.920 + 03:00 [info 02372 "Default"] connection to host on port 443 10.2.8.2

  2013 09-18 T 20: 57:55.920 + 03:00 [info 02372 "Default"] at localVersion is: vim.version.version7

  2013 09-18 T 20: 57:55.951 + 03:00 [info 02372 "Default"] remote version is: vim.version.version7

  2013 09-18 T 20: 57:55.967 + 03:00 [info 02372 "Default"] root user authentication

  2013 09-18 T 20: 57:56.029 + 03:00 [info 02372 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res

  2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool

  2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res

  2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter

  2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] vim VM root folder. Datacenter: ha-datacenter is vim. File: vm-folder-ha

  2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] reuse existing connection of VIM to 10.2.8.2

  2013 09-18 T 20: 57:56.123 + 03:00 [info 02372 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  2013 09-18 T 20: 57:56.139 + 03:00 [info 02372 ' vmomi.soapStub [8]'] adapter reset for Server TCP:10.2.8.2:443 heel: closed

  2013 09-18 T 20: 57:56.639 + 03:00 [info 02372 "Default"] Started task 'task-25' for job = ' job-25 ", item '2' = - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:383").

  2013 09-18 T 20: 57:56.686 + 03:00 [01184 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded

  2013 09-18 T 20: 57:56.701 + 03:00 [info 01184 ' vmomi.soapStub [5]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed

  2013 09-18 T 20: 57:56.732 + 03:00 [info 03928 'Default'] [task, 338] [task-25] - BEGIN - convert

  2013-09-03:00 [03928 error "Default"] Found dangling SSL error + T 18, 20: 57:56.779: error:00000001:lib (0): func (0): reason (1) [0]

  2013 09-18 T 20: 57:56.920 + 03:00 [info 03928 'Default'] [taskSpec, 467] task [25] [TaskMap] - 25:task - 2

  2013 09-19 T 00: 25:57.006 + 03:00 [03928 error 'Default'] [task, 350] [LRO] Unexpected Exception: converter.fault.ReconfigurationNoSystemVolumeFault

  2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [task, 379] [task-25] - ERROR - convert: converter.fault.ReconfigurationNoSystemVolumeFault

  -> (converter.fault.ReconfigurationNoSystemVolumeFault) {}

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> description = "InternalError"

  -> msg = ""

  ->}

  2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 267] retrieved taskInfo for ' converter.task.Task:task - 25 ' mapping to "converter.task.Task:task - 25". "

  2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 307] the task with id = 'task-25' proved to be a task 'recent '.

  2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-25" The task is still 'young' so a bundle of newspapers going now is assigned.

  2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-25"

  2013 09-19 T 00: 25:57.146 + 03:00 [info 02364 "Default"] passage work 0 'job-25' completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")

  2013 09-19 T 00: 25:57.287 + 03:00 [info 02364 "Default"] suspended 1 elements of Planner for employment (job-25) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")

  I tried to convert the machine with vSphere Standalond converter from several machines (running just the customer, not the converter itself). I use version 5.0.0 build-470252 of the stand-alone converter and I am trying to host it on a 5.0.0 ESXi hypervisor 469512.

  Any help would be really appreciated...

  Kind regards

  Angelos Pitsos

  Hello

  It took me almost a week, but the problem is finally solved!

  In the meantime, I did several tests which I want to mention in order to help others.

  I used a nice backup/cloning tool, called EaseUS ToDo Backup. Who created images of two readers, I have so been able to get back them in the VM to boot with the rescue disk (the CD iso file) EaseUS. Unfortunatelly even that did not help, because I was getting the message "BOOTMGR is missing" at the start of the system.

  So I tried to restore these images to the bare metal on a HP DL380 server. It took several hours to complete that, comparing with the previous trial on the virtual environment, but when it finished I got the same problems. BOOTMGR missing.

  On these two options, I tried to start with support for Windows Server 2008, but I couldn't "see" the disc. Also, it not there no other options repair that might help. I've tried everything. No luck with the Windows Server CD.

  Then I tried to see if I can fix it from the command prompt using the DISKPART command. Unfortunately I could not fix again.

  I was thinking about giving up, but I remembered my motto, that said 'Everything is possible', so I started to think about another way. I thought it might be a good idea to try to search for the problem that I see and not what I believe. I mean the problem started because the conversion went well, but the virtual machine was there. It was migrated into the virtual environment at the end, and finally he just was not able to start. Also, I restored "images" of the physical machine, created with another way, but I always got the same message. So it should not be the conversion itself, but something else that was causing the problem with the trunk.

  After spending some time searching the web for a solution I found here: BOOTMGR is missing in Windows Server 2008 R2

  Start with an image of the DVD Windows 7 x 64 Pro and try to automatically fix problems twice, gave me a c. bootable disk and an operating system of Windows 2008...

  I hope that helps someone else who will be the face of similar problems with a migration/conversion which will give after an error "BOOTMGR is missing".

  I would also like to thank you all who spent time with my problem and posted about it. I really appreciate it a lot.

  Kind regards

  Angelos Pitsos