Error during talk on network

Similar Questions

• HP support assistant, could not be installed error"1603 Fatal error during installation".

  Original title: HP support assistant failed to install

  After the update for hp support assistant failed I uninstalled, downloaded the update & tried to reinstall. It fails to install... network error 1316.A reading from the file c:\windows\installer\hp support assistant.msi. Setup restores the action with error - 1603 Fatal error during installation, see msi.chm or msdn for more information. Help!

  Hello
  Is that the question is specific to HP support assistant?
  Method 1: Run the following fix - it:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
  Method 2: Verify that the Windows Installer service is set to automatic, to do this, follow these steps:
  a. Click Start, type services.msc in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  b. in the list of Services, double-click Windows Installer.
  (c) in the properties of Windows Installer dialog box, click Automatic in the startup type list.
  d. click on start, click on apply and then click OK.
  e. start the installation of the software.
  Method 3: Unregister and register the Windows Setup program again
  See the following steps:
  a. Click Start, type cmd in the dialog box, then right-click on command prompt and click Run as administrator
  b. in the command prompt, type the following command:
  "MSIEXEC /Unregister." without the quotes and then click OK.
  Note: Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  "MSIEXEC/REGSERVER" without the quotes and then click OK. After you run this command, the operation is complete.
  c. try to install the program and check if the problem persists.

• C309g fatal error during installation

  Used the last full installation for C309g AIO. Under XP SP3. Wireless installation. Installation froze near the end to "product Configuration".

  After about 30 minutes, it is reported in a window titled: "C:\Documents and Settings\ (my username) \Local Settings\Temp\7zS5BFB\hpzsetup.exe"-«Fatal error during installation»

  Then place a file on my desktop that was supposed to fix the problem. But it wasn't only for installation of USB.

  Before that, the printer has been detected. The network is OK. Print 'Wireless Network Test report' shows all pass and no problems found. I can print and scan from another laptop on this wireless network.

  I totally uninstalled all HP software using Panel of control-add/remove, then reinstalled several times.

  This c309g worked at one point.  Also had a C4780 AIO as an old scanner flat 4570c on this network.

  I'm heading for Kodak, Lexmark or Brother.

  Click on the link below to find out how I completely uninstalled all HP "stuff" before you try to reinstall the full package all-in-one.

  He said do not to use the uninstall file - L4.bat, but I use it after the other 3.

  Before doing anything, I used "Revo Uninstaller" (free), instead of add remove, uninstall anything with HP or Hewlett-Packard in the title.

  Takes some time that whenever may require a reboot.

  I have not found all the HP files that are listed in the article, or in "services.msc".

  "Uninstall-L1..." 2, ... 3 and... 4 also require restart when everyone is finished.

  When does all this uninstall must start > run, type %temp%. Select all and remove the mess.

  Now, you can run the installation package.

  My c309g is now operational in printing and scanning. Also the Solution Center is back.

  Good luck

  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• Error during application deployment - an error occurred to deployment Cordova plugins.

  I get the below error when deploying the application of MAF.

  [18: 23:30] "org.apache.cordova.network" Installation - information for android [18: 23:30] error Code: INTERNAL_ERROR [18: 23:30] error during the processing of the action! Attempt to return...

  [18: 23:30] oracle.maf.mafhelper.api.MafHelperException: oracle.maf.mafhelper.api.MafHelperException: java.lang.Exception

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.runProcess (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.executeCmd (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.addPlugin (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.deploy (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.MafHelperMain.main (unknown Source)

  [18: 23:30] caused by: oracle.maf.mafhelper.api.MafHelperException: java.lang.Exception

  [18: 23:30]... 5 more

  [18: 23:30] caused by: java.lang.Exception

  [18: 23:30] to oracle.maf.mafhelper.api.MafHelperException. < init >(Unknown Source)

  [18: 23:30]... 5 more

  [18: 23:30] Server Android Debug bridge closure...

  [18: 23:30] deployment cancelled

  [18: 23:31] - incomplete deployment.

  [18: 23:31] an error occurred the Cordova plugins deployment. (oracle.adfmf.framework.dt.deploy.android.deployers.plugins.AndroidPluginDeployer)

  Help, please.

  Thank you and best regards,

  Paul Davis

  Hi all

  I solved this problem.

  This can happen to the below reasons:

  1.) location of the android SDK is too long.

  Solution: Put SDK in a path runs like: C:\Android\SDK

  Set the same in places tools-preferences-MAF-Android SDK.

  2.) location of the application (file .jws) is too long.

  Solution: When creating application MAF choose a short path, say: C:\ADF\Application

  The names of project application/3.) contains spaces. for example:(Sample Application.jws)

  Solution: Please do not include a space for Application for the name of the project.

  I hope this helps...

  Thank you best regards &,.

  Paul Davis

• Installer of creative cloud: persistent error 201 without any network problem

  Hello

  I had endless problems for creative cloud Setup to install correctly. He was to launch a 201 error during installation, but when looking what is the error, it says I have a network problem? It is the only app that says I have a connection error and have exhausted my options. How is it no direct support?

  I'm running a rMBP 2015 w / OSX 10.10.5. I tried to use the CC cleaning tool, but it's nothing and any attempt to uninstall applications CC, fail as well.

  Any help would be appreciated again because for some reason, you cannot not simply to contact Adobe support directly?

  Thanks for the help.

  I spoke with live support, it seems my payment information was not updated correctly, and so my subscription went up as suspended.

  I see that in trying to access the 'Contact us' link under help for cloud creative for installation problems, it gives only the forums as an option, when you use the link provided John T Smith, I could see the 'Live Chat' option, and spoke to a friendly person who helped me solve the problem.

  Will update here if it suits altogether.

• HP DL380p G8 with ESX 4.0 and 5.0 of error during installation

  Hello

  I need it please your help to the next question.

  I want to install ESX 4.0 or 5.0 on HP DL380p Gen8 ESX, installation of ESX I received the following error message:

  32.networking - drivers failed to run script and installation cannot continue

  What can be the problem? is it the driver problem if yes how can we add the ESX driver during installation.

  your quick replay is very much appreciated.

  Thanks in advance.

  Default PowerShell restricted running unsigned scripts. To allow them to perform, you must set the ExecutionPolicy setting properly. Depending on your system configuration, you may need to do that with PowerCLI start with "Run as Administrator" see set signature Remote Support properties

  For more information on how to use the Image Generator please read Using vSphere ESXi Image Builder CLI. There are also many available exapmles when you do an Internet search.

  André

• There are errors during the operation of sanitation

  What started as a quick and easy update turned into a mess. I wanted to update my host esx 3 lab. The first host was a running iSCSI device and the three hosts connect to this target. Now, I forgot first well remove the target on the three hosts. So when I stop this unit the three hosts lost their target and froze. The article KB 1016291 talks about this behavior and I was about to be updated because of this hotfix

  Now, since the first host was trying to go into maintenance mode, but never did, I had to kill the virtual and also rebooted the host machine. Now it seems I broke Update Manager. When I try to remedy or organize one of the three hosts, I immediately get an error: "There are errors during the clean-up operation".

  On the vCenter server, I checked the logs in C:\Users\All Users\VMware\VMware Manager\Logs update but I can't find no manifest error. However, I give some log files that has changed today.

  At this point I don't know where to look now. Restarted host, restart services, etc, etc..

  Any help is appreciated.

  Gabrié

  
  
  http://www.GabesVirtualWorld.com

  Check the var/log/vmware/esxupdate.log. Probably, you will find information more useful.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Download error during the download for iPad

  I took publications that I created on the pre-release program and have installed the new tools on CS5.

  I managed to import my publication and I can watch online on adobe.com, as well as in the Folio Builder in CS5.

  I did a preview in CS5 and it makes them all right there and I can see it on the PC.

  Did I miss a step?

  When I launch the content on the ipad and the connection Viewer, I see a reference to my publication. When I press download I get the following error

  Error during download

  Unable to start the download of the file is missing or invalid

  Patience. This is Apple we're talking about.

  You can test it on the Viewer from the office, but that is certainly not as good as get it on the iPad.

  Bob

• "Sync has encountered an error during synchronization: unknown error." Synchronize automatically retrying this action. »

  Hello

  I want to switch to Chrome, Firefox, but I have a problem with the synchronization feature.
  It always displays the following error message: ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  I already tried this work around, but it did not work: remove my account from syncing, completely reset my Firefox profile, import my favorites of Chrome (using an HTML file), set up a new sync account (using the same e-mail address then that previously deleted).
  But I still get the error message.

  I saw in other threads that could be a problem with the story, so I also tried to delete, but it doesn't work anymore.

  Here is my last sync-log file: https://pastebin.mozilla.org/8219943

  Thanks for your help.

  I finally found a solution to this problem of synchronization:

  I downloaded the add-on 'Housekeeping' and run the integrity check routine, and it seems to have solved the problem.

  https://addons.Mozilla.org/en-us/Firefox/addon/places-maintenance/

• Sync has encountered an error during the synchronization. Unknow error

  I get the following error message: 'Sync has encountered an error during the synchronization. Unknown error. Synchronize automatically retrying this action. "In addition, currently, my favorites are useless: I lost all my favorites and I can't add any new.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Problem with sync error: synchronization has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Hi, I started recently a problem with the sync on my desk. My partner Android and Mac laptop no problems when you attempt to synchronize, but office always gives the same error. I tried to disconnect from the desktop computer, erase all files, restart and then adding the Office to synchronize once more, but the error persists.

  All bookmarks on the desktop disappeared, but are still in my sync data and have no problem being viewed on other connected devices. It also tells me that the issue is not the sync server and that there is something unique to the desktop machine.

  I hope that this will not require a reinstall, but if all else fails, it's an option. I'll try to attach a log file once I put the question.

  I think the error message is in the title of the thread:
  
  Sync has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• unknown error during the synchronization of large amount of bookmarks

  I have thousands of bookmarks, but has not been able to sync. I always get the error message: ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  In order to solve the problem several times I reset the remote data, but always the same error after a retry.

  I also export bookmarks and re-imported (which replaced the existing bookmarks). Still the same problem.

  Any ideas how to fix?

  Hi Christophe,

  It may be a bug corrupting your data. Please, fill a bug by following these instructions: https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/

  Generally the bookmarks are not the majority of the data synchronized (story takes a big piece of storage).

• Solution for Power Saver error during installation

  Hello

  I've read several topics on the error during the installation of this utility powersaver.
  I had the same problem even with a clean install of windows XP and I FOUND the solution.
  The error seems to disappear and Powersaver works great after installing the Hotkey utility:
  http://support.toshiba-tro.de/tools/satellite/SA60/win-XP/hotkey-DD/hotkey-DD-XP-10008sa-du.zip

  Let's hope this message where it's useful.

  Greetz DeLorean

  [Edited by: admin]

  Hi DeLoren

  Thanks a lot for this useful information. I thought that this relocation tool will solve the problem. As we can see the usefulness of the shortcut key is also very important.

  If you have several solutions or useful information, please share it with us. ;)

  Best regards

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck