error during the upgrade to windows 10

Similar Questions

• Error during the upgrade to Windows Live 2011 2520039 KB

  I tried to install the upgrade to Windows Live 2011 2520039 KB, but it was not successful.

  Windows Update informs 800706BE error. I have installed all other improvements for Windows Vista Home Premium (32 bit).

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• 0xC1900101-0x2000c error during the upgrade to Windows 8.1.

  Hello

  I tried several times to Win 8.1 without a bit of luck.  I have download, he checks everything and then will restart and the PC stops the Party feel, although the installation.  I have to turn on the pc several times (thanks to its closure on its own) before it rolls back to the previous version.

  Once it does not restore it informs me that it has not been successfully and displays the code in the title.  Advice would be appreciated.

  I had exactly the same problem.  After 4 attempts, I went to the control panel (right click on the Start button in the lower left)

  Click on the control panel

  Click Action Center

  Click on troubleshooting

  under system and security, click on "solve problems with windows update.

  When he finds nothing try troubleshooting administrator-click

  After, he corrects the problem try to charge again 8.1

• UNMOUNTABLE_BOOT_VOLUME during the upgrade to Windows 7 from Windows Vista

  I'm getting an unmountable_boot_volume during the upgrade to Windows 7 from Windows Vista.  It occurs after Windows 7 software loads and restarts.  If I restart the computer, I have the option to start the upgrade to Windows 7 or Windows Vista.  If I select Windows Vista, the computer restarts without problem.  If I choose Windows 7 Upgrade, I get the blue screen of death with the unmountable_boot_volume error.  Of course, nothing wrong with the boot volume because Windows Vista starts without error.  The boot drive is 1.5 TB.  Any suggestions on how to accomplish the upgrade to Windows 7?

  Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I turn off my PC during the upgrade to Windows 10?

  Original title: Upgrading Wondows

  Can I turn off my PC during the upgrade to Windows 10

  Can I turn off my PC during the upgrade to Windows 10

  Hello.

  No.; You can't turn it off while improving to 10.

  See you soon.

• It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have?

  Original title: Windows 10 upgrade options

  It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have? I know there are problems with the upgrade a 32-bit version on 64-bit directly, but it is possible to install 64-bit and have a backup installation files in the Windows.old folder.

  If you are currently running a 32-bit version of Windows 7 and you want to migrate to 64-bit Windows 10, you will need to download the 64-bit Windows 10. ISO and make a custom installation:

  How to: perform a customized Windows installation

  A custom installation will produce a Windows.old folder, but as that mentioned, it is none functional. The best thing you can do is to create an image of the system in advance if you need to go back to Windows 7:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  See also:

  What are the official update paths to Windows 10?

  Microsoft has revealed in a video of 9 Channel official upgrade paths to Windows 10:

  

  Users of Windows XP and Windows Vista will have to do a clean installation of a. ISO, so Windows 8.0 users.

  Source: http://channel9.msdn.com/Events/WinHEC/2015/OWD100

  If you try to upgrade to Windows 7 by using Windows Update, it will keep the same architecture.

  How knowledge publishing Architecture, canal and the construction of 10 Windows installed.

• How can I work around the compatibility test during the upgrade of Windows Vista Edition Home Premium to Windows 7 Home Premium?

  During the upgrade of Windows Vista Edition Family Premium of Windows 7 Home Premium, he stopped at the compatibility check and asked to uninstall McAfee Personal Firewall Plus. I uninstalled McAfee Total Protection, but the problem remains. I contacted the technical support of McAfee and it installed and running a deep cleaning products McAfee removal. But the problem remains. What should I do to work around the compatibility check, so that I can complete the upgrade to Windows 7 Home Premium.

  Go to C:\Program Files

  Remove the McAfee program from there folders

  Restart the installation again.

  Also:

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• error during the upgrade codes to win 10

  I got this error code pops up OX8009000F. Anyone have any suggestions?

  Thank you very much!  Kel

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Problems during the upgrade of Windows 98 Service Release 2 for Windows XP Professional Service Pack 3

  Well, I have an old Dell Dimension that I wanted to use and I decided to upgrade from Win98 to WinXP Pro.

  In the process as soon as I start the upgrade process it gives me an error message"
  " Error 589FF5Ch" I checked around the Web sites and found nothing.

  If no response would be appreciated.

  E-mail * address email is removed from the privacy *.

  Thank you.

  Dear God. I can't believe how much a long time ago, I asked this question. Over 2 years later I see something in my Inbox (right now). Honestly, I know more ask this question.

  And more now, I would say try the upgrade to Windows 2000 if you happen to have a product key. Then go to Windows XP. If not, is it possible to restore Windows 98 updates? Perhaps the latest edition of Service causes a conflict with the upgrade. You be left with a clean cloth. I'm curious, that you still have a machine running Windows 98? What is the material/specs on this platform? I can't believe anyone is still out there running old technology like this to use out of it.

• Error during the download of Windows 8 on Windows 7: "download failed. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  I don't know what to do.

  Original title: download Windows 8 Windows 7

  Hello Travis,

  Thanks for posting your question on the Forums of community of Microsoft.

  To better understand the issue please help us with these questions.

  from which site you try to download Windows 8?

  b. what browser do you use to download?

  c. you try to download a full version or update?

  d. you run the upgrade wizard before trying to download the Windows 8?

  This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:

  C:\Users\\AppData\Local\Microsoft\Web install

  See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
  How to upgrade to Windows 8

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• ORA-04063: package body 'SYS. DBMS_SQLTUNE error' during the upgrade

  Hello
  I am trying to upgrade the oracle 10.2.0.2 on 11.2.0.1 with dbua tool database. During the upgrade "Oracle Server" ORA-04063: package body 'SYS. DBMS_SQLTUNE"error has occurred.
  In the oracle server log:
  
  ---------------------------------------------------------------------------------------------------------------
  
  REM create the automated SQL Tuning task
  REM If the task exists already (catproc is re-of running) is not error.
  Start
  2 sys.dbms_sqltune_internal.i_create_auto_tuning_task;
  exception 3
  so 4 than others then
  5 if (sqlcode =-13607) then - task already exists
  6 null;
  7 other
  8 lift;
  9 end if;
  10 end;
  11.
  Start
  *
  ERROR on line 1:
  ORA-04063: package body 'SYS. DBMS_SQLTUNE"contains errors
  ORA-06508: PL/SQL: called program unit is not found: 'SYS. DBMS_SQLTUNE ".
  ORA-06512: at line 8 level
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  After unsuccessful upgrade I have restore and recover the database. SYS. The DBMS_SQLTUNE package and package body were valid. But when I compile them the package becomes invalid.
  I get the error and reach 390221.1 metalink Note:
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Solution
  -Drop synonyms
  Drop public synonym existsnode.
  excerpt from Drop public synonym;
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------
  
  But there are no synonyms, which is mentioned in this note in my PB.
  
  How can I solve this problem? Thank you.

  If you have not read the note ORA-04063: package body 'SYS. DBMS_SQLTUNE' errors - upgrade to 10 G and 11 G fails on ID Dbms_sqltune 1271490.1+?

  Nicolas.

• Process held during the upgrade to Windows 7 windows.old files

  In the months I have updated Windows Vista to Windows 7.  Unpon update I found the C: drive was almost filled to capacity and had established that about 155 GB of files are now in a folder called windows.old when I saw the C: drive with explore.  I was able to recover some of the files in subfolders: Documents and Favorites and hoped to return to garner extra of the content I rmembered I could use if migrated on space available.  Subsequently, the files: Windows and Windows.old were more visible.  It would be nice to collect a little more elements of the 'old' files, but of equal importance would be the prospect of eliminating the overhead of the files ~ 155GB now unusable.  (1) how I see these files?  (2) how can I erase what I don't want when I see it?  (3) is there a risk to just delete the program files that are stored in the Windows.old folder?

  Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads