Error "failed to loadlibrary error 126: the specified module could not be found" when you install the program

Similar Questions

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• RUNDLL error: error loading kbdsnb.dll the specified module could not be found when the system starts

  Original title: Missing Dll message

  I get the following message is displayed after the start of my laptop... "... error rundll error loading kbdsnb.dll... the specified module could not be found.

  It does not appear when I search this file on the net? What is this error and how to fix it?

  Thank you

  Hi heshie75v,

  1. does the computer boot to the desktop?
  2. don't you make changes before the show?

  We assume that the computer starts on the desktop after ignoring this error message. We recommend that you check if a non-Microsoft program is defective. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "the specified module could not be found" when the USB drive is connected.

  Original title: execution of disk error hard usb

  I use windows 7. whenever I have plugin a usb drive and open it it gives a shortcut of the same drive without showing all data and when I opened the short cut, the following error is displayed.

  There was a problem starting 4 # .ini
  The specified module could not be found.
  I also try to activate windows bit defender it gives error

  Internal error of shell. Please contact the software developers

  Code = 0xC000005, address = 0x10059E8D

  Hi Prashant,

  Try to uninstall the security essentials and install avast.  I have installed trial version, he found an additional virus and after that my system works fine.  Try it and check if it works.

  Concerning

  Patricia

• I get an error, "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" when removing malware.

  Original title: RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd.
   
  I tried to deleted manually scamware/malware (your computer has been locked by the U.S. Department of Justice) from my computer. After reboot I get this RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" if I click ok or X it stays just black. Please help me if you can. in a lay mans language as much as you can.
  I'm not much more than a geek, but can still manage my own if you tell me exactly what to do. Please include the step by step instructions. Thank you

  Two things... one, take a look at this site for some information and instructions (where something is hanging out)
  http://www.selectrealsecurity.com/malware-removal-Guide/
  and to know exactly what is running at the start have a look at this tool.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• RushDownload.dll error... specified module could not be found

  I get this message just after the start.

  It is said that 'he was, a problem starting C:\Users\xxx\AppData\Local\RushDownload\{EB999BCB6-06B0-052E-44C0-70D5E16BE6E1}\RushDownload.dll.

  The specified module could not be found.

  Help, please... :)

  It is probably a remnant of some malware that your virus scanner deleted. Run msconfig.exe and then selectively uncheck items under the Startup tab until you find the culprit.

• Using Windows Media Player, I get the error: "the specified module could not be found" when I try to play a wave (.wav) file.

  I have re-installed sound edge card, updated the driver, checked that it is enabled in the bios. Play other types of sounds.

  Wave Systems sounds do not play either and everything by checking the sound scheme system sounds, (Panel > properties of sounds and audio devices > sounds tab) they don't play and the 'play' button is not enabled.

  Hi sureshotsd,

  · What version of Windows media player you have installed?

  · What is the service pack installed?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  Follow the method below:

  Method 1:

  Create the new user on the computer account and check if you are able to play the file. You can check the link for the procedure to create the new user below account: how to create and configure user accounts in Windows XP:http://support.microsoft.com/kb/279783

  Go back with the results.

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DeskJet 2542 all-in-one: 2542 Deskjet all in one error: "the specified module could not be found" when installing on USB

  Installation runs OK until the USB cable is connected, when the error message appears and the installation fails.

  I have correctly installed and work the printer on another XP PC of a similar age - that is to say old.

  I've updated the XP operating system to SP3 with many updates.

  Check that ports USB read only data fits OK;

  run a / v programs and malware, including Microsoft Safety Scanner;

  check that the USB drivers are up to date;

  software driver uninstalled and reinstalled with the software downloaded from HP;

  performed the procedures detailed in HP Support Forum 4022116

  The same error message.

  It's for my elderly neighbour - help please!

  The somewhat simpler answer to this problem was to do a clean install of XP SP2, accepting the necessary updates, and then install the printer software, downloaded from HP.  A lot of time but it worked, and the old PC runs a little faster!

• Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

  Original title: run DLL error message

  When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

  Hello MaureenCYB,

  Thank you for the question!

  I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Windows Defender error 126: the specified module could not be found

  How to fix Windows Defender on Windows 7?

  For some time now, Windows Defender no longer works. I can't install new updates of definition and the service cannot be started. If I try to manually start the Windows Defender service, there is an error message:

  "Error 126: the specified module could not be found.

  However, I can launch the GUI of C:\Program Files\Windows Defender Defender. However, I tried to download the Windows Defender from Microsoft, but the installer launches because it is said that Defender is already part of Windows 7 x 64.

  I'm really looking for a way to get Windows Defender to rework.

  First of all, it's what I already know and what I don't want:

  • I don't want to disable Windows defender, I want to make it work again
  • I have no antivirus uninstalled or disabled Windows Defender software, the module really seems to be corrupted (I am software engineer)
  • I don't want to reinstall Windows or use the backup, because I don't know how far I have to go back
  • Windows Defender can be removed from the menu of functions and software, because it is part of the operating system
  • I do not have MSE installed, tried to install it, haven't changed a thing

  Any solution to solve this is appreciated. Advanced solutions (Registry hacks, enveloping, manual installs, work...) Welcome!

  Kind regards

  Florian

  I was able to fix this on my own. It seems that the registry has been damaged (as I thought).

  Changed the DisplayName property is property in the register of "Windows Defender" to "@%ProgramFiles%\\Windows Defender\\MsMpRes.dll,-103" which in reality should not be the cause of the problem, however, the DisplayName property original of the resource file.

  ServiceDll property have been replaced in the registry of
   
  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 c, 00, 65, 00, 73, 00, 25, 00, 5 c, 00, 00, 69, 57, 00, 6F, 00, 64, 00, 6f, 00, 00, 73, 77, 00,------.
  20,00,44,00,65,00,66,00,65,00, 6F, 00, 64, 00, 65, 00, 72, 00, 5 C, 00, 6 D, 00, 00, 70, 73,------.
  00,76,00,63,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  TO

  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 C, 00, 65, 00, 73, 00, 28, 00, 78, 00, 38, 00, 36, 00, 29, 00, 25, 00, 5 C 00, 57, 00, 69, 00,------.
  6th, 00, 64, 00, 6f, 00, 77, 00, 73, 00, 20, 00, 44, 00, 65, 00, 00, 65, 66, 00, 6F, 00, 00, 64, 65,.
  00,72,00, 5 c, 00, 6 d, 00, 70, 00, 73, 00, 76, 00, 63, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  in fact, which solves the problem. WIndows Defender is now in service yet. Updates can also be installed again.

• "iphbrbtf.dll the specified module could not be found" error starting

  When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

  Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

  RUNDLL

  Error loading c:windows\mcycol40.dll

  the specified module could not be found.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

  original title:. Error loading windows

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

  First of all, download, install, update and scan with these two free utilities:
  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

  Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.