Error file compressed (zipped) folder is invalid when the folder name and the location is OK

Similar Questions

• When I try to use the send to compressed (zipped) folder option I get an access denied message

  When I try to use the send to compressed (zipped) folder option when I right click on a file I get the following message

  Unable to complete the operation.

  Access is denied.

  However I do have permisions complete on the file and I am the only user and administrator

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  This can sometimes solve the problem on its own.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• There was an error creating a zipped folder - "missing or empty zip file.

  I use Windows 7 64 bit and want to Zip to a large number of content items in a foder, about 1200 points, amounting to 800MB. I select items, right click, "send to" and select "compressed (zipped) folder." The process begins and after an indefinite comes up with an error 'compressed folder error - missing or empty Zip file.

  It's very strange because the process is in fact create the zip folder, sometimes it gets a little path through the process before the error and creates a small (8 MB) zip file, sometimes it get far and creats a big file (250 MB), but it ends.

  Any ideas?

  You can use a 3rd party zip software.
  I don't know whether you are running in a limitation of the program.

  Some have the trial version that you can download to see if it will work for you.

  Thank you

• Option 'Compressed (zipped) folder' is missing to send it to.

  The "Compressed (zipped) folder" option from the options of is missing on my machine. I ran the command rundll32 zipfldr.dll, RegisterSendTo. When I run the zipfldr.dll rundll32, RegisterSendTo I get the message "error in zipfldr.dll missing entry: registersendto. I also copied the shortcut of windows users who did not work either. Are there alternatives?

  You can get a copy of the shortcut in the SendTo "Default user" folder. Follow the instructions here.

  Restore missing "Compressed (zipped) folder" option in the menu send to in Windows 7/Vista/XP

  And note that the 'rundll32 zipfldr.dll, RegisterSendTo' command works only in Windows XP systems.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Context menu ' New > compressed (zipped) folder ' vs ' send to > compressed (zipped) folder ".

  I'm moving again right click and zip file, but the option is not there. I have to right click and go to send to, and then compressed zip folder or use 7-zip and move everything on the desktop, create copies and then to have to go back and delete after that is very time consuming. I just want to do a right-click option of origin go again and zip folder back. Can anyone help?

  The context menu (the thing that appears when you right-click) is different if you right click on an empty space on your desktop to the right by clicking on an icon on your desktop.

  If you click on an icon, you get the choice ' send to ' with several sub-menus including "Compressed folder (zip)."

  If you right-click an empty space on the desktop, you get the 'New' choice with several submenus, including "" the file compressed (zipped)."

  If you click on the icons of some - but not all-, you will get a 'New' choice that has no submenus.  Selection of the 'new' opens in some program opens the item specified by the icon.  In other words, if you right-click on a Word document (or a shortcut to a Word document), by selecting 'New' opens Word.  Items that are associated with programs that cannot create a new file (for example, Adobe Reader for pdf files) won't even have the choice of 'new '.

  Then... If you right click on an empty spot on your desktop, is the 'New' element?  And if it is, is "File compressed (zipped)" absent from the list of submenus?  If so, see number 3 here (and read the below directions on this page)--> http://www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

• Compressed (zipped) folder program has stopped working. __ __

  My order of compressed (zipped) folders does not work. Can you tell me how to do to uninstall then install this feature in XP Pro

  Here are the steps I used to compress a file.

  ·         Choose a file in a desktop file

  ·         tradecenterposter of file highlight Adobe 34 538 KB

  ·         selected file send to then compressed (zipped folder)

  ·         Open box that says file compressed in a box, it reads

  ·         Compressed (zipped) folders properly manage files Zip, Compressed (zipped) folder must be at the application associated with them. Currently, this is not the case. Do you want to designate Compressed (zipped) folder as the application for the management of ZIP files? Yes or no

  ·         I choose Yes the bar scale shows that it pass like a Flash, I have the look and the file is compressed with a 33 953 k file size the size of the original was 34 538. Why it not zip to a much smaller size?

  ·         I now have to choose a zip Tradecenterposter 2,539 KB Jpeg file. Still, the box opens and I wonder, records for compressed (zipped) to handle Zip files correctly, the application associated with them must be Compressed (zipped) folder. Currently, this is not the case. Do you want to designate Compressed (zipped) folder as the application for the management of ZIP files? Whether I click Yes.

  ·         The Zipes file and the size is now 2 470 the original file was 2 539 again the Zip is not much smaller than the size of the original.

  Please tell me how to get the program working properly.

  Thank you

  Michael

  Start > run > regsvr32 zipfldr.dll [Enter]

  If this does not help, it will take another command to change the. Association of ZIP.

  Start > run > cmd /c assoc .zip = CompressedFolder [Enter]

  MS - MVP - Elephant Boy computers - don't panic!

• compressed/zipped folder

  When I open a compressed/zipped folder on my trial of desktopand click something in it, it always says "Not responding" and tells me to end or cancel. How should I do?

  Hello

  I suggest try to perform the clean boot and then check if the same problem occurs:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Also visit these links:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cf_opening.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/vz_ovrvw.mspx?mfr=true

  It will be useful.

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why my GPS stopped suddenly when the location and the surroundings have not changed work?

  Why my GPS stopped suddenly when the location, a framework and the weather conditions have not changed work?

  Ros

  iPhone 4S OS 9.2.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If this does not work and to rule out a software problem, set it back to factory settings, without using any data backup later. Test the phone and if the GPS works again, restore the backup.

  If the GPS does not work after the factory reset, it is a hardware problem, and Apple has to repair the phone if GPS can be fixed.

  In the case where it cannot be resolved, it could offer to replace the iPhone 4s, if you are willing to pay the price for the refurbished phone.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from: answer Service Center - iPhone

  
  

• I am unable to create a regular folder! I get a compressed (zipped) folder how can I get rid of the .zip extension?

  This happens when I right click and choose New from the menu drop-down

  The zip option is supposed to be there. You lost only the regular folder option.

  You have installed chrome? It's looking like a recent update of chromium may be the cause. Here are two patches.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

• Dxdiag how poster compressed zipped folder to the question?

  I have a problem with the camera work is not and have posted my question more details but can't get the dxdiag compressed/zipped to post? copy/paste doesn't work, drag and drop the habit. I'm not very good with computers and it blocked me. Please take 2 minutes to troubleshoot this old man

  Attach files is not yet enabled on this forum to forum '10 Windows'. In order to attach a file to your message, you will need to post your question on 'Skype for Windows desktop' Board of Directors.

  https://community.Skype.com/T5/Windows-desktop-client/BD-p/Windows

  You should not compress the DxDiag file, but setting directly in the DxDiag.txt file.

• When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

  whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

  (1) is the issue limited to only Corel Draw?

  I suggest you to restore the default values by pressing the F8 key while the program starts.

  Reference: File not found valid environment...

  http://CorelDRAW.com/forums/t/4156.aspx

  If the problem persists, I suggest you contact the link mentioned below for the best support.

  http://CorelDRAW.com/forums/

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• error message when the location of my pictures (Google maps)

  Excuse my bad English, I'm french! When I try to inform them of the location of my pictures in IPhoto, using Google Maps in the Info window, I get this message: "Oops!" something was wrong. This page has not properly loaded Google maps. See the JavaScript console for more technical details"

  What can I do with Java script?

  Thank you for your response.

  Contract of Apple with Google to use Google maps with locations of the pictures in the iPhoto library has been cancelled a few months previously.  That's why iPhoto 9.4.3 and earlier can no longer access the Google map servers and get this error message.

  If you use iPhoto 9.4.3 or earlier you can stop the fracas in the following manner, but will lose the mapping functionality in the library.

  iPhoto 9.4.3 and earlier began planting for many users suddenly a few weeks ago. This is because the contract between Apple and Google for the use of Google maps with iPhoto 9.4.3 and earlier sites expired an elderly couple of months and was not renewed. This is the case of him freezes or crashes.

  Now uses Apple its own program for locations maps and too the use you need to run iPhoto 9.5.1 and Mavericks or 9.6.1 and Yosemite El Capitan or Photos and El Capitan.

  Try Huxly647Solution:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon

  I found a solution that works for me.

  1 goto /Applications/iPhoto.app/Contents/Resources (control (right) - click the iPhoto application and select the content in the context menu - OT.)

  2 delete the files 'googlemap.html' and googlesearch.html

  iPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  There is a notch posted by user cotton-x that will let iPhoto 9 and earlier still use Google Maps for the purpose of the location.

  cotton-x

  16 December 2015 14:49

  Re: iPhoto 11 - problems with Photo locations

  in response to Paul Fisher

  YES!

  I did just the job.

  I'm on a macbook running white 10.7.5 with iPhoto 9.4.3

  Thanks to Paul, I got an idea. What happens if we had simply ignored Apple has expired API and used our own, private and free from Google. Turns out it works.

  Here's what you need to do:

  0 - quit iPhoto

  1. create a google account or use your own

  Console developers of Google 2 - access HERE

  3. create a project (any name)

  4 - turn on a Google Maps Javascript API

  5 - generate your own API key

  6 - go to the folder /Applications/iPhoto.app/Contents/Resources/googleMap.html

  7. change the googleMap.html (I used an application called TextWrangler)

  8 change the src ="http://maps.googleapis.com/maps/api/js?v=3 & client = gme-appleinc & sensor = false" > to this src = 'https://maps.googleapis.com/maps/api/js?key=YOUR_KEY_HERE& signed_in = true & sensor = false ">"

  9 - save your freshly edited googleMap.html

  10 - open iPhoto and enjoy.

  Take the Apple.

  

  Don't forget to make a backup copy of the iPhoto application before performing this procedure.

  

• views get invalid when the procedure is changed

  Hello
  When a procedure is changed and therefore newly compiled some views according to are reported as 'invalid '. For this reason the following application generates errors. How could it be created to complie based on all of the objects (e.g. views) when the procedure gets compiled?
  
  Rgds
  Jan

  The coil of the output of the select statement in a file and then run the file:

  Select 'Edit'. "replace (object_type, 'BODY of PACKAGE', 'PACKAGE') | '|| object_name |' compile; »
  from user_objects
  When status = 'INVALID';

  It compiles all invalid objects of a user. After execution, you can repeat the step if the compilation of an object struck again a few other objects - select till does not any new release.

  Kind regards
  Monika

• Context of the sequence becomes invalid when the runtime is longer

  I have a sequence that loop for about 70 k iterations (which is pretty huge). The sequence called a subsequence where the inhabitants of the sequence called are modified. Question is, around 65 th iteration k, I get an error message indicating that the reference of the local past is invalid. The number of iterations when the error occurs varies from one computer to another, but always in the 65 k range. When I try to run another sequence (a single) consecutively, I get an "out of memory" error I guess the reason why the local reference is not valid because TS execution stops when the memory TS gets the complete decision-making context of sequence and therefore the reference local section not valid.

  I would like to know how to reduce the consumption of memory of TS because I disabled the result of record for all the result of sequences (Configure-> Options of Station-> run), disabled registration for each iteration of the loop, optimize no reentrant calls thi sequence is also enabled. I even tested with just this sequence of sequence and I wonder if there is a maximum number of threads of execution when a loop.

  PC configuration

  RAM-12 GB

  LabVIEW and Teststand 2010 SP1

  I will not be able to view the code, but the closure is a custom step which has sequence call as its adapter.

  Hello

  I tried this:

  Main sequence called a sub sequence, which includes 3 stages of instruction.

  I have a loop sequence sup to 75 k with result logging enabled.

  TS runs successfully - no problems.

  Try to jump steps (one at a time) in the sequence of sub to know at what stage leads to this question.

  Also try to reproduce using a simple sequence (that you can post online).

  Ravi