"Error: Getserverinfo failed ' at the start of Windows 7.

Similar Questions

• My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54

  My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.

  Hello

  The exact error message would have been very useful because it may be Malware.

  It may be a legitimate program.

  http://support.Microsoft.com/kb/174381

  http://www.fileinspect.com/FileInfo/MSDTC-exe/

  Would that be it: "MSDTC Console?

  And can be malicious:

  http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html

  It can be a boot entry remains of this Malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after the scan post back or if it was malware take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Is it possible to lock the start of Windows 8 on a monitor screen while accessing the office on another?

  Running HP EliteBook 8560w using the screen of the laptop and HP 2709 m as second screen; running Windows 8 x 64. I try to add a third monitor if it is possible to lock the start of Windows 8 on one screen.

  Thank you

  No, it is not possible then.

  But, if she were here, it would have been a great feature.

  Concerning

• igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

  igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

  Hi Bob Bala.

  
  Thanks for asking this question to Microsoft Community!
  
  As I understand it you receive a startup message all to connect to the computer.

  He would be grateful if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?
  
  I would suggest trying the following methods and check if it helps.
  
  Method 1:
  
  You can try to check if the problem occurs in safe mode and check if it helps.
  
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Method 2:
  
  If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
   

• Error code 0x8007064a on the basics of window os 7security anti virus. Uninstalled norton and restart one then tried 3 times, even as an administrator to install the new program with no successTryed own care, no luck.

  Error code 0x8007064a on the basics of window os 7security anti virus. Uninstalled norton and restart one then tried 3 times, even as an administrator to install the new program with no successTryed own care, no luck.

  Norton is a utility that you can try to clean.

  Norton cleanup utility (SYMClean) .url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• When I start my computer I have the error message: "failed to connect to A Windows Service.

  A few days ago, I received this message by turning on my laptop:

  "Could not connect to a Windows Service - Windows cannot connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  However, when I go in the view of the event log, the "Event Viewer" window opens and I get this error message:

  "The event log Service is unavailable. Check that the service is running. »

  There are several other programs that will not open not because the message "failed to connect...". "appeared.

  I received help with back - light to the Windows event log. Everything was going well until I arrived at the end status section, instead of saying "started" it said "stopped". I've changed the status in the direction of "on the road" and then received the following message is displayed:

  "Windows could not start the multipoint Windows event log on the Local computer. Error 1747 - the Authentication Service is unknown. »

  What should I do now?

  Hello

  I suggest you follow under method that can help you solve your problem:

  Method 1: try to make the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• error "sgtray.exe" in the start window

  ORIGINAL TITLE: I have Windows XP with upgraded ram and 512 MB of memory

  at startup receive window "sgtray.exe" error message reads "not able to start because vxhttp.dll is not found."  Reinstalling the application may fix this

  Hi patb646,

  ·         Did you do changes on the computer before the show?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• error code 80040006 during the installation of windows live essentials on windows 7.

  I have a new computer and I'm trying to get everything to work right. We manage the reception of windows 7 pro 64-bit. I am trying to download the updates, and they are all worked well until I got to the windows live essentials. they all fail repeatedly. Get the codes as 8004006. Why does he refuse to install?

  Well, it was worth it. Now let's see...

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: «0 x 80242006»
  http://support.Microsoft.com/kb/956707

  Tip: Use the Vista-specific resolution.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• update fails with the ccr 800b0100 windows 2008 cluster

  Hello world!!! I hope you stay warm...

  I have a windows 2008 sp1 64-bit server that is running Exchange 2007 sp1 on a passive node of a CCR cluster... There are 2 groups in our org, all other servers update very well... windows firewall is disabled...

  I had one "update failed 800 b 0100" run windows update to KB969947 (which is successfully installed on all machines)...

  followed by all scenarios http://support.microsoft.com/kb/947366 ... even uninstalled my Symantec Mail Security 6 on this node... always the update fails...

  Let me know if you need more information...

  Here is the output of the system update tool...

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2010-01-14 08:07

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947~31bf3856ad364e35~amd64~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 391
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.cat

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  FOR INFO:

  
  Frequently asked questions about the vulnerability of the Win32k - CVE-2009-2513 insufficient data Validation

  What systems are primarily exposed to this vulnerability?

  Workstations and servers terminal Server is mainly threatened. Servers could be at risk if administrators allow users to connect to servers and to run programs. However, best practices discourage you to allow this.
  
  Source: http://www.microsoft.com/technet/security/bulletin/MS09-065.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Icons are white or invisible at the start of windows 7.

  We have just upgraded a laptop Sony Vaio running Vista 32-bit Windows 7 Home Premium. There were not problems by installing the software and Windows loads fine but once it does all the icons on the desktop and in the menu start are either a box white or completely gone. The icon shortcuts seem to work when you double-click. The same problem occurs in windows Explorer. For example, in the pictures folder, none of the thumbnails are viewable. It's the same thing with the white boxes. We have updated the drivers and it doesn't seem to help. I also reset the icon cache and who still doesn't seem to help. The interesting thing is that if I start the computer in safe mode icons ARE visible. Any ideas on what can be causing this and what can we do about it? Let me know if more information on the specifications of the computer is required and I can post it. Thanks in advance.

  You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Your post has nothing to do with Windows Update. Please repost in one of the following instead:

  Install, activate & upgrade
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Maintenance & performance
  http://social.answers.Microsoft.com/forums/en-us/w7performance/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Error message so that the installation of windows and windows xp, a problem has been found was arrested to prevent damage to your computer

  I currently have a HP g4 with an AMD Phenom x 2 p650 (64-bit) 4 GB of ram and a 500 GB HARD drive. It has windows 7 Home premium on it, and I'm double starting with windows XP. However, whenever I insert the windows XP disk it says:

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
  Check for viruses on your computer. Remove any newly installed hard drives or disk controllers.check hard drive to ensure that it is correctly configured and completed. Run chkdsk /f to check for hard drive corruption, and then restart your computer.
  Technical information
  STOP: 0x0000007B (oxF78D2524, oxc0000034, 0x00000000, 0x00000000)
  I tried the 32 bit and 64 bit and followed the instructions above.

  Hello

  I suggest you follow the link to fix the problem and check if it helps:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

  Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

• Download the "error 0x8007000D Code" during the installation of Windows Vista.

  Original title: 0x8007000D error Code

  Hello

  I tried to look at related issues of mine to see if the answer given in this section may be useful for me. Unfortunately, none of them were useful, so I decided to make my own thread to see if I get a response that will help me.

  When I turn on my laptop (IBM Thinkpad) I get a black screen with writing: "operating system is not found" (not the complete text, sorry...)

  Although I forgot to mention, I get this on another computer, not the one I'm currently using.

  So I tried Google cela one realized that my OS was corrupted. I then tried to reinstall my OS using a CD bootable to Windows Vista Ultimate Edition. When I type in the product key in characters I get the following:

  "Windows cannot open the required file D:/Sources/Install.wim.Make sure that all the files required for the installation and restart the installation. 0x8007000D error code. »

  Now remember that I currently use another computer on this type because I can't get my screen to start the computer I get the 'operating system is not found' on. That's why can't get a diagnostic report.

  This is where I got stuck & don't know what to do, I'm not sure if it's the CD that has the problem or product key, or maybe even the computer itself. Someone has an idea? What would be really useful.

  EDIT: I also forgot to mention that I discovered the cell with the error was originally a Windows XP as OS, but when I bought it, the OS is a Windows Vista.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you get the error when you try to install Windows Vista.

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  Method 1:

  First check if you have scratches or dust on the disc and clean the surface and try again.

  Method 2:

  Unplug all external/usb devices before installing Windows Vista.

  If the problem persists after you perform the methods, you may need to contact the manufacturer of the computer or use another drive to install Windows Vista.
   
  Hope this information helps. If you have any questions with Windows do not hesitate to answer and we will be happy to help.

• Why my keyboard and mouse are dead at the start of Windows 7 Home Premium?

  They partially dead through boot but usuallycome back on except when first starting the morning.  After using the power button / stop and wait a few minutes, they come back OK on the next boot.  Work due to certain programs at startup?

  Your device drivers are up to date? Check the website of your PC or your mother maufacture support.

  If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  ================================================

  Also check the event logs for errors indicated shortly after the hour of you 1 start the computer.

  (Click Start / right click 'Computer', then click 'Manage' in the list.) NECT click the "Event Viewer" in the System Tools category.

  J W Stuart: http://www.pagestart.com

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!