Error handling and the basic flow data

Similar Questions

• Error: 0xc000012f and the KERNEL DATA PAGE FAULT

  My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

  Original title: need assistance immediately please.

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

  If you have any questions regarding the procedure, please ask

  
  

  I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

• Outlook Express 6 problem: send an email I get an error message and the email is not put in the sent items folder

  Outlook Express 6, Windows XP SP 3

  Problem: send an email, I get an error message and the email is not put in the sent items folder while the email (and attachments, if any) are successfully delivered to the recipient.

  The full error message is always useful, but I'm sure you have damaged dbx files.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Outlook express 6.0 may send, but receives an error, unidentified, and the message remains in the Outbox

  Outlook express 6.0 may send, but receives an error, unidentified, and the message remains in the Outbox

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• upgrade from 3.2 to 4.1 - error handling for the unavailable database links

  Hello
  
  I have a 3.2-> upgrade problem 4.1 associated with error handling for the damaged database links.
  
  I have a conditional button Exists on a page that contains a SQL query to related tables. However, for 10 minutes every day where the target of the link database becomes a cold backup, the query fails. In the apex 3.2 old, I just had an error within the region where the button is located but otherwise, the page was still visible:
  
  "Is not valid/not exists condition: ORA-02068: following a serious error of MYDBLINK ORA-01034: ORACLE not available ORA-27101: there is no shared memory realm."
  
  However, in the apex 4.1.0.00.32 I get the following unhandled error and click 'OK' brings me to the edit page when logged in as a developer.
  
  that is, the page cannot run at all so that the links to the database fail to this one area.
  
  Treatment of error condition.
  ORA-12518: TNS:listener could not hand off client connection
  Technical information (only visible for developers):
  is_internal_error: true
  apex_error_code: APEX. CONDITION. UNHANDLED_ERROR
  ora_sqlcode:-12518
  ora_sqlerrm: ORA-12518: TNS:listener could not hand off client connection
  Component.type: APEX_APPLICATION_PAGE_REGIONS
  Component.ID: 4
  Component.Name: alerts today
  error_backtrace:
  ORA-06512: at "SYS." WWV_DBMS_SQL', line 1041
  ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 687
  ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 272
  
  Users generally see this:
  
  Treatment of error condition.
  ORA-01034: ORACLE not available ORA-02063: preceding the line of MYDBLINK
  
  by clicking on 'OK' takes the user to another page, don't know how the Summit decides that, but not a concern at the moment.
  
  I did a search and read the http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ page, but the new apex error handling is not clear to me, and I don't know if the apex_error_handling_example provided on this page would be applicable to this situation.

  Hello

  It was my fault, I forgot that the code will be compiled on the fly which already fails if the table/view of deletion is not accessible. Nice that you found yourself workaround.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• I have a G4 and the transfer of data to an I mac?

  I have a G4 and the transfer of data to an I mac? There is no port Firewire on the Imac A1418

  Use a FireWire 800 adapter Thunderbolt and if necessary, an adapter FireWire 400 and 800. If you wish, you can use a network or external drive instead.

  (142220)

• HP 15-f305ddx: I haveva hp 15-f305dx with an error code and the password of the bios 58495227

  I have a haveva hp 15-f305dx with an error code and the password of the bios 58495227

  Thank you so much, you're the best

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7

  Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7

  Refer to this:

  Download cloud creative to troubleshoot and install questions

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Tecra A10 - fake error messages and the date of

  Hello, Toshiba Tecra A10, PTSB0A-002001 under XP pro,

  I get the wrong date & error messages on my cell phone when I get out my laptop for long periods off without charge, so I guess that the Cmos battery is not good, so I ask: what is the cmos battery number and where can I get one?

  Thank you

  Hi joe75,.

  Before you exchange the CMOS battery: leave the AC adapter plugged in for at least 24 hours. During this procedure the CMOS battery recharges and the laptop should be able to store the correct date & settings repeatedly.

  Check this box!

• Pool and the Volume of data latency does not match the SanHQ

  Using some PS6000 (Sata and SAS) as a back-end for ESXi and looking at the graph view on SanHQ and the raw data on export, but I'm not able to give a sense of latency information.

  Generally for fields, the data in the column pool or member matches very closely to the sum of the parts of the volume (for IOPS / s, flow, read, write, etc.)

  However, latency is not, nor is he anywhere near average either.

  In the graphical display we noticed high (20-40 ms) latency playback of our pools and members, but the volumes that make up these pools are all less than 10ms. During a storage vmotion, we will see a huge spike in IOPS / s and latency and sizes KB will drop to almost nothing during the copy rebound back at high levels as the traffic goes down.

  Makes a lot of sense to me (except perhaps if seq I/O is reduced to deal with latency)

  To monitor latency, it seems that I need to watch the largest volume of latency of a given pool, but not the pool itself or asymmetric information.

  I would get a few reports of MS Log Parser against export CSVs, but I need to make sense of this first. Latency is a KPI is no not a lot of sense.

  When you see the IOPS rise and the latency goes down, it's actually a normal thing. It is called Nagle algorithm. It makes pretty much the TCP packets wait until they are full before sending them. Here is a document that can be useful, what explains the algorithm more in detail.

  http://SearchNetworking.TechTarget.com/definition/Nagles-algorithm

  Until reporting problem you're talking about I would recommend making sure that the last FW is installed on all members of the Group and ensure well the last version of SAN HQ are also installed. Just curious you have configured replication? I can't wait to hear back on your part.

• Active Directory and the Source of data in Application Weblogic

  Hello

  I was asked to find a way to record information of users created via Active Directory in my datasource request so my application can control if the user as authorization.

  My application, services to extract the data and the data source will be in the weblogic.

  What I found so far that there was to be a supplier Active Directory in the weblogic for authentication, and it will work similar to the SQL provider, put all the users and groups in the weblogic.

  Basically which, according to me, I have to do is create something (service or DB package function perhaps) that will allow to establish synchronization between the two AD and my database somehow.

  How I can do it, or there is an easier way to do it?

  Thank you

  Hello

  Yes, that is what I suggested in my initial post. In some scenarios, I also use JAVA API for details of user AD and works pretty well.

  Thank you

  Amey

• EDI Inbound error - A with the 'Compulsory' status data segment is missing.

  Hi all
  I am facing a problem trying to read the file through B2B EDI. PFB the steps that I followed.
  
  1 create file ECS in Oracle B2B EDI input file Document Editor
  2. create XSD for the ECS
  3. configure the ECS and the XSD generated in Oracle B2B
  4. create agreements and Trading partner
  
  I have provided all the required values in the exchanges and section on page of document definition and partner group profile.
  
  
  When I place the file, I get the error in the parameters below.
  
  GS (functional group header) segment to the position of guideline n/d is missing. Standard option of this Segment is "mandatory". {br} {br} This Segment was expected after: {br} {tab} Segment count: 1 {br} {tab} character: 105 Segment GE (functional group trailer) to the line position Director n/d is missing. Standard option of this Segment is "mandatory". {br} {br} This Segment was expected after: {br} {tab} Segment count: 1 {br} {tab} character: 105
  Error level: ERROR_LEVEL_COLLABORATION
  Severity of the error: ERROR
  Text of the error: A chunk of data with the status of 'Required' is missing. A data segment with the status of 'Required' is missing.
  
  Kindly help how to solve this problem. I use B2B 11 g.
  
  Thank you
  Ralu

  It's a question of data. It seems that you are testing the incoming stream. Make sure that the header in the payload values match the values you provided in the configuration of the Protocol document.

  To get a good file to test incoming cases better first test an outgoing cases, even generated file in order to test incoming cases.

  Kind regards
  Anuj

• determination of the sampling rate and the frequency waveform data record

  Hello

  I write a simple program that collect data from a triaxial accelerometer input, convert it to a frequency spectrum, and then save the time domain and the frequency of the waveforms in an external file separated.  I don't understand how to set the sampling frequency, however.  On the DAQ Assistant, I updated the acquisition mode "Samples continues" and read samples is 2 k, which corresponds to the total number of data points that are collected.  How can I program sampling for awhile, it 30 seconds, for example?  Wouldn't be better to set up a trigger, as it will continue to collect data up to what I told it to stop?

  I also want to save waveform data in a separate file that can be easily seen by other computers that have not installed Labview.  I have currently the program put in place to convert a text string of the waveform of the time domain and then save it in a text file or a spreadsheet.  It works fine, but I would also like to record the frequency wave, which is a different type of data.  How can I do this or is there a better way?

  My program is attached.  Thanks for your help!

  Here's how you can use the shift register to build the table, and also where you can choose to play exactly 100 samples per while the loop iteration.

  

  Brian

• LabVIEW base, protocols supported system of development and the basic features

  Hello

  I ask this question here because I can't find that information on the web, or I get the technical support e-mail response. We are interested in acquiring a license of basis of Labview to start development to develop test for simple automation systems. The basic idea is to have a card with digital, analogue i/o, common seria interfaces: RS232, Ethernet, I2C or SPI. All this to interface HW under test.  A single port for communication with the PC (USB, Ethernet, RS232).

  We would like to know:

  (1) what protocols are supported by the Labview Base development system package.

  (2) if the license mode allows you to integrate MATLAB/C/C++ code.

  (3) in general, where a document that provides details on the characteristics of the Labview. We were not able to find a manual for it. Just this very basic with informaton purchase link: http://sine.ni.com/nips/cds/view/p/lang/no/nid/1385.

  Kind regards

  Jose

  Have you looked at the page 'Buy' for LabVIEW? http://www.NI.com/LabVIEW/buy/

  Basically, I think that LabVIEW base supports everything in terms of basic Windows protocols, but does not include LabVIEW RT or FPGA (for CompactRIO/FPGA targets) but you can use series, ethernet, etc. DAQmx for windows (and also the instrument 3rd party drivers). It doesn't have the enhanced math library or the application Builder so that you can not create executables/installers - you will need run your code in the development environment.

  Alternatively, you can call external code .NET / C dll through the call library function node. You will not be able to incorporate Mathscript, because it is only in the complete edition upward.