ERROR IDE resolved #1

Similar Questions

• Sat Pro 4270: Error IDE on the first commissioning.

  I'm putting a DVD/CD-RW but get error IDE at first startup (before message screen)
  Loaded with new BIOS 2.70 TRAD but not go
  New drive is a Compal TSB24H1 Combo (Brand new)
  Do I need a different connector

  Hello

  I agree with littco. If the two devices, the HARD drive and the CD/DVD drive are set to master or slave, in this case you get an error of the IDE controller.
  As far as I know it of not possible to change the settings manually. :(
  To resolve this problem, you need a compatible player.

  Good bye

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards

• Satellite Pro 4290: How to solve the problem of error IDE #1

  I recently purchased a DVD - ROM drive to put my optical drive Sat Pro 4290 a CD in DVD - ROM. As suspects, I am the problem if the drive is not recognized and get error IDE #1.

  I can get windows XP to recognize the disk by deleting the secondary IDE channel in the material and then look up the new material again. Then installs the IDE channel and then detects and installs the DVD-ROM and works very well. I restart the computer laptop and back to square one!

  I understand that it is something to do with the settings of the motherboard and someone has solved this welding pins in different locations on the IDE connectors.

  I don't want to risk it and I was wondering if anyone finds an easier way to do it?

  Thank you very much

  Hello

  > I understand it's something to do with the settings of the motherboard and someone has solved this welding pins in different locations on the IDE connectors.

  Set to true if not 100%. This isn't a matter of adjustment on the motherboard, but the setting of the CD/DVD drive.
  The Player supports different master\slave\c-salt settings and if they are not compatible BIOS does not correctly recognize drive.

  On external hard drives (for desktop) it s possible to change these settings by changing the jumper, but it is not possible for readers portable slim.
  Portable settings are stored in the firmware!

  I found various non-legal tools that can change the master/slave/c-salt settings but I wouldn't recommend using it.
  The risks are too high so that the reader will have some damage.

  So, try to replace the drive with a compatible

• Satellite 1410-304: how to solve the error IDE #1?

  I read on the pins of connection 45 & 47 to solve 'error ide #1' and my question...
  How to change of mode c / salt/slave differently (without connecting pins)?
  I bought liteon dvd - RW drive (sosw - 833 s 51 c) and satellite 1410 304 facility and my laptop will not work with this drive (at startup 'ide #1 error', os do not drive)

  Hello

  I'm not 100% sure but c-salt/slave can not be changed. It is factory defined essentially as slave.

• Satellite Pro 6100: disk not recognized HARD - error IDE #0

  I just replaced a failed HARD drive from MK4019GAX in my 6100 Pro of the Satellite with a MK4026GAX and have tried to install XP Home. I can't recognize the hard drive of the computer.

  When I boot, I get a message ERROR IDE #0 before installing Windows, then a message saying that all third party SCSI drivers should be installed first. (I'm starting with the Windows disk in the drive) then when it is at the end of the installation process a message saying that "put in place did not any hard drives installed in your computer.

  If I boot without the Windows I'm getting PXE - E61 Media test failure.

  When I go into the BIOS ACPI BIOS version 1.90, under devices "Mode HDD = used (s) ' I can't get in to change and there is nowhere else that seems related to the hard drive (apart from the boot priority section).

  I read on a forum somewhere that there could be problems getting the BIOS to recognize a new HARD drive.

  It is a common problem for this model, or is the new hard drive may be defective?
  Is there a workaround or a solution?

  If all requested assistance right.

  DM

  Hello

  This error message indicates that the HARD disk drive was not properly acknowledged. The fact is that this unit uses a regular IDE (ATA-5) interface and the new HARD drive is supported by this interface.
  In this case, I assume that the HARD drive has not been installed correctly. Try to remove the HARD drive and check the connections.
  The other possibility is that the HARD disk controller is dead.
  In this case, the service partner must check the laptop.

• ERROR IDE #1 - help! (1415 S173 Toshiba)

  My parents have a Toshiba 1415-S173

  His computer could not be powered by the AC adapter.
  They expelled their computer for repair under a warranty they have.

  The "Order summary" sheet shows that only 'Adapter' and "DC Brd" serviced.

  I do not understand why the computer gives this error at startup; "ERROR IDE #1". The CD - RW drive is not found by the computer at all.

  My mother says that when she put running the computer, the error message appeared, there was a message telling him to update the date and time in his computer, then its open BIOS. She changed the date and time.

  Thanks for any help

  Hi Chris,

  Control of AC power is normally part of the motherboard, and I suspect that repairers have changed this to correct problems with the AC supply. This might well have caused the BIOS back to default values (perhaps because the BIOS battery has been replaced or disturbed.)

  The fact that the BIOS date and time must be reset seems to confirm this.

  I highly recommend updating the BIOS with the latest version from the Toshiba web site and then check that the CD - RW is correctly installed and that it is in the correct order in the selection of the BIOS boot menu.

  It is also useful to check that the CD - RW has not been disrupted by the repairers (check that the connection pins are not damaged).

  HTH

• Satellite A50-104: after DVD drive upgrade - error IDE #1

  Hello

  I have a Toshiba satellite A50-104 and to replace the SD - C2612 DVD standard player for a NEC ND - 6750 A DVD Writer but after reinstalling the drive and turn it on I get a message of ERROR IDE 1 before windows XP starts up and the drive is not recognized. I tried to detect the drive by using the Add Hardware Wizard, but it does not detect.
  Can you please help.

  Regards Gary

  Hello

  I'm not sure but I think that the Toshiba DVD r /-RW / RAM (number P000399450) drive must be compatible with the Satellite A50.
  It is also called DVD Super Multi drive, UJ-820BTJ6-A (G8CC0001S210)

  I found it on this page:
  http://www.impactcomputers.com/p000399450.html

  But generally the best way to control the compatible parts and devices is to contact Toshiba service partner in your country.
  Here, you will get all Hamade on the right parts.

• Model error: cannot resolve macro: RegisterResolvers

  Hi all
  
  I am using RoboHelp for Word after three years and more - and feel a little rusty. I have tried to import a Word document into my project (and sometimes succeed, if the file is small enough) and then attach a custom template that is based on RoboHelp.dot. Is it possible that the custom template, I used for my project is corrupted and it is causing the problem in all the other projects that I create from scratch later? Note that it is possible to solve this problem by reinstalling the RoboHelp application software...
  
  Initializing the compiler...
  Generation of WebHelp 5.50 (13.10.606)...
  
  Model active Script error: (null) [line: 13] (null)
  Model error: cannot resolve macro: RegisterResolvers
  
  Fatal error: cannot run macro: RegisterResolvers in the build script.
  Model error: cannot resolve macro: WH_HOME_HTM
  Model error: cannot resolve macro: WH_CSH_HTM
  Model error: cannot resolve macro: WH_CSH2_HTM
  
  WebHelp (WebHelp) was built successfully:
  C:\TEMP\garbage\test\! SSL!\WebHelp\test.htm
  
  

  Hi Peter,.

  Thanks for your quick response. It's nice to meet the resident expert! :-)

  I have the full version of RoboHelp Office X (Pro) for .NET, and it was installed with Admin rights. The application, project files and output all resident locally (on the same hard drive,) but on different drives. I need to produce a WebHelp output as a stand-alone help system (for now...).

  Yes, re-installation of the application would be solve the problem, but only until I present again of my custom template. I believe that Your ' e right - my model was the culprit. So I redefined styles in RoboHelp.dot instead and seeing me is no longer the error of the model at compile time. I also followed your advice and set the macro security in Word in the middle. Thank you. I also need to increase the amount of memory available in Word running (to import large files).

  Thank you
  Rachel.

• Error: Cannot resolve a multiname unambiguous reference. MX. RPC.http.MXML:HTTPService

  I have this error:
  
  Cannot resolve a multiname unambiguous reference. MX. RPC.http.MXML:HTTPService
  (from C:\Program Files\Adobe\Flex 3\sdks\3.0.0\frameworks\libs\rpc.swc(mx/rpc/http/mxml/HTTPService)) Builder and (from C:\Program Files\Adobe\Flex Build
  
  I think it's maybe because I have this tag:
  
  < mx:HTTPService id = 'login_user' result = "checkLogin (event)" method = "POST" url ="' http://localhost/php/plum_tree/loginId.php ' useProxy ="false">"
  
  in the mxml file * if I take this outside and the click event code that calls checkLogin (event) there is no error.)
  
  and this tag:
  
  Import mx.rpc.http.HTTPService;
  
  in a .as file that is called from my mxml file.
  
  SEE YOU SOON

  Flex provides two classes of HTTPService in the mx.rpc.http.HTTPService and the other is mx.rpc.http.mxml.HTTPService. mx.rpc.http.mxml.HTTPService is a subclass of mx.rpc.http.HTTPService.
  Discover the language reference Flex for the differences between these two classes.

  That your code uses both HTTPService classes, there is ambiguity.
  There are two solutions to your problem. If you want to use the mx.rpc.http.HTTPService then change your code as below.
  private var gateway: HTTPService = new HTTPService();
  TO
  private var gateway:mx.rpc.http.HTTPService = new mx.rpc.http.HTTPService ();

  or
  Just use mx.rpc.http.mxml.HTTPService in both places.

  I hope this helps.

• Model of WebHelp error: cannot resolve the macro

  RoboHelp HTML 5.0.2 Build 801
  Word 2003 SP3
  I worked fine until this afternoon. I tried to generate webhelp in two different projects. In the output window, I see messages in the update files and then a message flashes and it goes to so, but nothing no is there to see.
  The message is something like template error: could not resolve macro WHH #78 or something like that. I really can't read.
  
  I look for the answer on this forum and in the help system, without result. I'll leave soon but don't come in the morning and try to start again troubleshooting. Any ideas that might help would be greatly appreciated
  
  Sandy

  I went to the customers of RoboHelp and found a solution. I downloaded RoboScriptReg.exe, ran the installation folder, and now the problem is solved.

  Thanks for your help.

• Tecra 9100 - error IDE with new drive

  I want to use a burner DVD UJ - 820B on my Tecra 9100, BIOS-Version 1.6.
  If I change the UJ-820, I have IDE #1 error in the Bootscreen, and the device is not recognized.

  No tool or the update for this problem?

  A #1 IDE error normally if a wrong settings or connection together.
  So I think that the disc is not compatible with the laptop.

  Look in your user manual and choose a drive that is listed in the manual. Not every drive is compatible with any laptop.

• Satellite Pro 4330: code error error IDE #1

  Hello

  I had old satellite pro 4330 but I got the IDE error #1 error code, what can I do? I need help please!

  Thanx

  Did you upgrade or replace the CD/DVD drive?
  I ask because this common error message appears if the BIOS cannot recognize the drive correctly.
  Especially something like this occurs because of the wrong master/slave/c-salt settings.
  Unfortunately, it of not possible to change these settings because the laptop internal led don t support riders.
  You can put the jumpers on the external hard drive, but not on the drive of the computer laptop slim.

• Error IDE #0 the Portege 2000

  First of all, sorry my bad English
  I send this error a while ago, but 2 days ago, I do retest and I want to know if with this new information, anyone has any new ideas.
  I have a 1'8 "hd giving 'IDE #0 error' ' with my portege 2000 but if I put with and adapter IDE in a standard PC, it works without problem, the only thing I see strange is that in a standard PC 1'8 ' HD as a slave not appear as master, I found the documentation for this type of hard drive that shows me jumpers I should use to configure the slave mode master hd and without" riders (as I connect to my portege 2000 and my adapter) it must be master, so I think that thar "IDE #0 error" appears because than the hd (I don't know why) was detected as slave without any reason... everything has an idea...

  I have a second question, after I installed xp sp2, I have install all drivers for Toshiba but hardware/system show an exclamation (driver issue) on "diskette controller" and I try to install common modules with different version but I can not, can someone help me

  Thank you

  Hello Gleoelo

  Almost 2.5 months looking for help. This is the forum of users and chances to have a detailed response to this technical problem are not so big. Portege 2000 is portable to very sensitive design and I really don't think there are that many users have experiences with this model of laptop.

  Why don't you contact technicians. I really think you need professional help. With the installation of the OS I think you should try to install SP1 and Windows XP Home edition with SP2. After the operating system and any installation of Toshiba stuff, you can install SP2.

  Is this Portege laptop and I am sure that it was preinstalled with SP1.

• Qosmio F10 get error 'IDE #0 ERROR.

  Hello all, just bought the Qosmio F10 installed all the things I had to do. installed and registered the norton anti-virus. everything went well. now a few hours later I want to boot my laptop and get the error "ERROR in IDE #0"

  so I put my recovery dvd disk, follow the steps. English start installation, Windows xp, full disk recovery, continue...

  then I get the error: "error checking for a drive partition - please try again! Press a key to continue. then I just get: c:\ >

  That's all I have As

  any help?

  THX in advance,

  Hi Maarten

  I guess there is a problem with the HARD drive. Obviously, the HARD drive is not recognized by the BIOS, and it is not possible to access this topic.

  Please contact your dealer immediately and explain the problem.

  Good bye