error ikernelexe when you try to install the multimedia driver

Similar Questions

• 1935 error message when you try to install the device driver for the wireless broadband

  need help addressing an error message when you install a device wide band.   Error 1935

  Hello

  1. have you done any book to the computer before this problem?
  2. What is the exact error message of th?
  3. What is the brand and model of the computer?

   
  Method 1:
  I suggest you perform the steps in the section "" method 1: repair the installation of .NET Framework 4' and ' method 4: repair the .NET Framework "in the following article." You can ignore the title of the article.
  http://support.Microsoft.com/kb/2507641

  Method 2:
  Unregister and re-register Windows Installer
  Unregister and re-register Windows install to fix the Error 1935 in Windows. Follow the steps below to reregister Windows Installer.
  a. Click Start, click all programs, and click Accessories.
  b. right click on command prompt and run as Admin
  c. type following commands
  msiexec /unreg
  msiexec/regserver
  d. Exit at the command prompt

   
  Method 3:
  Run the System File Checker
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 4:
  Run Disk Cleanup.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-disk-cleanup

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Error 1721 when you try to install the Sprint SmartView software to use the Sierra Wireless 598U device.

  Error 1721 when you try to install the Sprint SmartView software to use the Sierra Wireless 598U device.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

  Original title: initialization error 112 Setup

  1995 installed Kodak DC200/DC210 Zoom camera software.

  Explanations with the error: decompress the program files not all charges.

  Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

  I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

  Thank you

  Destry

  PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

  D.

  Hi Destry,

  1 windows operating system you are using?

  If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

  For more information, please visit the following links:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

  http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

  You can try to install the device in Windows XP compatibility mode and check.

  Check out the links for more information:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Also read the following article:

  Error 112 Setup Installation Error message"when you try to install a program

  http://support.Microsoft.com/kb/326678

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DIFx Driver Package install error = 536870141 when you try to install the MFL-ProSuite for a Brother MFC-J870DW printer all in one

  Hi everyone, I have read the various issues pertaining to the Brother software and the IS052 error that I got also.

  I spoke with brother two times and they tell me that I'm missing a driver and if I sent the error message DIFx Driver Package install error = 536870141 to Microsoft, they would be able to provide me with the driver I need.  Brother also had me try to install from the disk and also on their site and I got the same error.

  I am a home user, so not very technical when it comes to drivers, etc..  I know that you need.  So please don't you technique on me.  I have been messing around with this now for almost 2 weeks and can that copy and print.  I can't scan or fax due to this error when you try to install the software.

  I have the disk with the drivers on what I did when we first got the computer.

  I use Windows 7 64-bit.  I really need help so I hope that there is someone who can solve this problem.

  Thank you very much

  Judy F.

  SW Florida - USA

  Karthik, sorry it took me so long to answer.  I hate it when people do that to me then again I am sorry.

  After trying your suggestions, nothing seemed to work so I asked my son who is a type of systems to help me.  I he provided with suggestions and error message, etc..  He read about all this and then remote connected my suburb.

  He renamed the errorlog and then tried to reinstall the Brother software and got the error.  He was then able to read this file was causing the error without reading through the tone of the error messages.  It turns out that there is a file that brother was looking for in one place, but it was in another.  He copied to where brother was looking for her, has done a reboot, loaded the software without problem.

  I am now scanning and everything works as it should.

  So maybe it's the same problem that others causing a problem.  If they can get the steps to find the error Log, look at the error message that is created in the error log, which will tell them what brother file cannot find and then go from there.

  I don't think I could have done myself, but he knew where to look for such things, and I don't have.

  Thanks again for all the help I got from this forum.

  Judy F.  (a happy user of printer Brother)

• I get error 800b0100 when you try to install the KB961371__ update

  I have trouble to install udate KB961371.

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  See...

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702

  See also the section "How to get help" of http://support.microsoft.com/kb/961371

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CASE policy Error Message When you try to install the driver for Kodak esp 5250

  I get the error message "Manager policy of Microsoft .net framework case has stopped working" when you try to start the installation of the 5 Series Driver Pack. Tried all the Basic .net troubleshooting I found on the net. Get the option debug or close the program. After clicking Close the program, I get the error message "installation printer Kodak has stopped working". Any ideas? Advice? More info needed? Vista SP 2.

  Hi MC_JP,

  Users faced with a similar question solved this problem by installing Microsoft .NET Framework 3.5 Service Pack 1.

  Step 1: I you suggest to download and install Microsoft .NET Framework 3.5 Service Pack 1 from the following link and then try the printer driver

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  Step 2: Put the computer in a clean boot and installation of the printer driver

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Kodak printer drivers

  http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?PQ-path=15506&product=EKN036744

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the error message when you try to install the automatic updates of code 8007065E

  I use Windows Vista Home Premium with Service Pack 2. Two updates automatic Windows are repeatedly not to install and error codes are 8007065E Code and Code 1, which doesn't seem to appear on the Windows help site. Has anyone else had these codes and if so, how can they be solved?

  Hi Paul Rabbetts,.

  (1) how long have you been faced with this problem?

  (2) the windows updates are unsuccessful? Please provide the number of the Base of knowledge (KB)

  It is sufficient to indicate the complete error message you receive.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Let flow the fixit available in the article below and then check

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Download and install the updates manually from Download Center in the clean boot state
  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4:  Clean boot the computer and then try to install the updates

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• get the 490 error code when you try to install the update net framework

  0000490

  Hi harry_m,

  You are able to install some other updates of Windows on the computer?

  Please provide compete the error message you receive and also specify Windows Edition\Version you are running on the computer, for a better understanding of the issue.

  I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run (Checksur.exe) system update readiness tool

  Follow the steps mentioned in the link (method 1) below, and then try again to install updates

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error volume generic when you try to install the disk driver hard ext

  I have a toshiba satellite laptop computer with Vista Home Basic and a WD my passport essential 320 GB external hard drive

  Here's the question,

  I got the update of WD Web, its installation site and on my computer work... will not install the drivers.  I go to the Device Manager and the drive appears as unknown device.  try to update driver software, and then gets all throughout this so-called - "windows found driver software for your device but encountered an error trying to install", and then below that theres a picture of a hard drive and next it is written "generic volume". then below that it says "this operation requires and the interactive window station.

  went to disk management, any option that I click on reassign a drive letter or to reformat I get various error messages.  basically the wtf.  Ive google the issue and the error message and have tons of similar problems posted by other people, but nobody has the right solution for me - tried so much.  I called windows, they were no help, sent me here essentially.  not called WD they have no help...

  Anyone have any ideas?

  Thank you!

  Hello fighclubber25,

  a. don't you make changes to the computer before having this problem?

  b. are the other USB devices work properly on your computer?

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  My research, I find that there are several problems with the Antivirus software when trying to install the drivers for the Western Digital hard drive. I suggest that you disable the antivirus software temporarily and verify if you are able to install the drivers. Also, make sure you download the correct version of the drivers.

  Note: Make sure that you enable the antivirus software after the test. You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Connect the drive to another computer and check if you are able to load the drivers. Just to make sure that the hard drive is not defective.

  You can also check out the link that will give you information on tips for solving problems with USB devices below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• 8007000D error Code when you try to install the update KB971644

  Well, the title pretty much says it all

  I got this update Windows, sitting in the status bar for about 2 months now and everytime I try to install it, I encounter an error.

  The update is KB971644 and the error Code is 8007000D.

  Anyone have any ideas on how to solve this problem?

  Thank you

  You've waited 2 months?

  8007000D - Error_invalid_data.  Corruption in the folder C:\Windows\SoftwareDistribution.  Rename the folder % windir%/Softwaredistribution.

  or
  Description and the Windows Vista CheckSUR update for Windows Vista for x 64 systems
  http://support.Microsoft.com/kb/947821
  0X8007000D ERROR_INVALID_DATA

  How to rename the software D folder in Vista - distribution agent version

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.
  You can always check what updates have been installed quite easily.

  TaurArian [MVP] 2005-2010 - Update Services

• Error"800b0100" when you try to install the updates

  Title: Trying to install the new security but windows update won't let me?

  I removed mcafee security off my computer restarted and tried downloading new security trend /titanium... don't leave me not cuz it says I have to update windows... but I try to do - I get a code of 800 b 0100. Any ideas on what I should do - get this new security and installed? Any ideas would be greatly appreciated!  Thanks, Lori

  Hi Lori,

  Thanks for posting your query in Microsoft Community.
   
  I understand from the description of the issue that you are having problems with the installation of the updates. I'll be happy to help you with this problem.
   

  (1) did you do changes on the computer before this problem?

  Method 1: I suggest you to follow the steps from the link and check if it helps.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: If the problem persists, I suggest you to follow the steps from the link and check the status of the issue.

  Windows Update error 800b0100
  http://Windows.Microsoft.com/is-is/Windows-Vista/Windows-Update-error-800B0100

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Error 8000FFFF when you try to install the update

  I tried both options. First, I used Mr. Fix It and the response was that iupdate has been installed, the next day, I realized that is not true to fact. When I started the update of Windows Vista again, I got the same error 8000FFFF. This means that I n 't have the same update again. I tried the other option for the Proz tech and I did not succeed.

  What this means for me, Mr. Fix It Pro can not solve this problem, and as I am not a tech Pro, I can't fix either. What is the solution for this problem?

  Respectfully,.

  Nicole

  [Original title: 8000FFFF]

  Hi Nicole Maxim,.

  Follow the manual steps here if you have not already. If the problem is still not resolved, you can perform an InPlace upgrade to. This option allows to restore you current Windows installation to the default without interfering with your personal settings or installed programs.

  It is advisable to make sure that you have a recent backup of your data and how to reinstall your software before completing major steps of troubleshooting.