Error in action 3: file or Application: C:\ATSCallingCard\install\ATS Hot Keyexc: not found

Similar Questions

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• I get a file sorttbls.nip on my desktop at startup is not found

  I get a file sorttbls.nip on my desktop at startup is not found

  Hi, Steviecaca,

  See the solution given here: file sorttbls.nip

  http://social.msdn.Microsoft.com/forums/en/Vsexpressinstall/thread/c32e9822-Edde-4407-804B-77ef77cefaf2

• Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

  I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error message: serial number you provided is valid, but no product qualifying was not found on this computer

  After deactivation of license on iMac and want to reinstall on a new MacBook Pro, I got this error message: serial number you provided is valid, but no product qualifying was not found on this computer

  In fact the steps provided by Kglad are accurate.

  Kappes please check software licenses which you have saved in your account at http://www.adobe.com/.  You can find more information on how to locate your serial numbers to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  You want to locate your serial number upgrade, but your serial number of the previous full version eligible as described by Kglad in the #1 message.

• Cannot install HP recognition facial error files installation requirement visual c ++ ALT for 64_new is not found

  Original title: requirement visual c installation files + ALT to 64_new is not found

  I try to install HP face recognition for HP protect tools from my Elitebook 8560p and get an error for a C++ requirement.  It seems that I have all the possible C++ but not this one.  I have an I7 processor 500 GB hard drive if necessary.  Could someone please point me in the right direction.  I have C++ 2005 x 64 and x 86, C++ 2008 x 64 and x 86 and C++ 2010 x 64 and x 86.  I thought that maybe it was because it's a new computer and that he does not have to date and service packs again but worked right out of the box.  I reinstalled Windows Ultimate 64 that no chance.  Thank you!

  Hi kristophercline,

  In fact, it seems that HP software is not compatible with Windows 7 Ultimate.  Have a look here.  I would suggest contacting HP Support directly:

  http://WWW8.HP.com/us/en/support-drivers.html

  Thank you!

• Windows 7 SP1 will not install. Element is not found, the error not found (0 x 80070490) 490

  I'm running Windows 7 64.  I tried to use Windows Update and received this message: element not found, not found error (0 x 80070490).  Code 490 Windows Update encountered an unknown error.  I tried all of the troubleshooting, difficulty, burning the .iso (which worked great on my laptop running Win 7 32) and I tried a repair, nothing works.  Any ideas or should I just not worry about installing SP1?

  Steve

  All,

  If all the above steps give no results, the next logical step is to perform an InPlace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon

• STOP: c0000135 {Unable to locate component} __This application failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  I have a problem with my laptop which comes to hang. Bluie screen.
  the screen show:
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  In my opinion, is due when I have T.V. Media installed on your computer. I try to use the safe mode and select disable it the automatic restart on system failure option and press ENTER. But nothing works. I have all the time the blue screen with winserv wasn't written. I try to have access to have access to safe mode or something to download, because I try to download criticism 885523 update that I download on a USB key.

  Please this drive crazy me I need your help

  You receive a "Stop: c0000135" and "winsrv was not found" error message after you install Windows XP Service Pack 2

  http://support.Microsoft.com/kb/885523

  S.Sengupta Media Center MVP

• box "applications for c:\Windows\system32\wuapp.exe not found" appears. I use vista.

  c:\Windows\system32\wuapp.exe

  applications not found

  Box Monte. I use vista. What is the problem and the solution?

  Hello

  1 have you made changes to your computer recently?

  2. when appears the c:\Windows\system32\wuapp.exe box?

  I suggest you carry out the methods and check them off below if it works fine:

  Step 1

  Run the System File Checker to fix corrupted files

  support.Microsoft.com/kb/929833

  Step 2

  Perform the system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-back-time-on-your-PC-undo-system-changes-with-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-quest

  Concerning

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• error 1721 windows installer a program required for this install to complete could not be run

  I have an operating system of Windows Vista Basic 32 bit on my laptop.  When I tried to install itunes this error message 1721 arrives.  Since I tried to install new hardware on the printer and it would not have worked either.  Any suggestions on how to solve this problem.  Thank you.

  Hello

  Thanks for the update and try the initial suggestions. This lets us know that Windows Installer is installed corectly, but we probably a blocked program installation.

  Looking for a registry key "Iin Progress:

  Warning: You should only edit these registry entries if you really know what you're doing. Back up your hard drive first.

  a. the empty registry key "InProgress".
   
  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  and clean all the entries that you find.
   
  b. empty/rename "PendingFileRenameOperations" registry key:
   
  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  and clean all the entries that you find.

  Here's what I'd like to try then. The Windows Installer Cleanup utility is used to remove any stuborn programs. Perhaps that we have either an installation program failure, who left the installer of Windows in a "current state", to iTunes or another program has been partially installed and needs to have these deleted remnents before we can move forward with a new facility.

  290301 - description of the Windows Installer CleanUp utility:
  http://support.Microsoft.com/default...b;en-us;290301

  I would like to know if one of these help.

  Mark <> Microsoft Partner

• Error creating VM with client PXE:M0F workstation: Intel PXE ROM operating system not found

  I'm new to VMWare workstation.  I have a problem on a new installation of the workstation 7.  When I create my first VM, I point to a XP ISO image that I know works because we use it for the image of the PC and I get the following messages:

  PXE:M0F: Existing Intel PXE ROM.

  Operating system not found

  This could be the cause?

  Thank you

  Hello and welcome

  There is no error in itself - it simply means that a this may be the case

  -l'iso is not bootable

  -the check box stating 'Connected' is not marked

  -the box indicating "Connected to the ignition" is not marked

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• RUNDLL - error loading C:/Program files/commonfiles/paretologic/UUS2/UUS.d11__The specified module could not be found .__How set?

  How to fix this particular rundll error?

  You can determine exactly what causes most of the errors by following the steps below:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I updated Firefox, restarted and now I get the following error message when I try to reopen Firefox. "The sqlite3_stmt_readonly of procedure not found entry into the dynamic link library mozsqlite3.dll."

  I just updated Firefox and restarted.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• When the actual application is also installed, ThinApp5 package does not work.

  Here's him wrong simple:

  1. real installed Winzip 14 on the 32-bit machine.

  2 ThinApp 4'd WinZip 14 - run side by side. No problem.

  3 ThinApp 5'd WinZip 14 - have I geta message "cannot install over the MSI installation version. Please get the MSI version or uninstall WinZip first. »

  I don't know there is a switch that I picked the wrong at the time of packaging.

  What did wrong / how can I solve this problem?

  Thanks in advance.

  This looks like a problem with the application and not ThinApp.

  Similar problem is reported here: http://www.sevenforums.com/software/46104-winzip-14-won-t-run-if-installed-non-default-path.html