Error in call to LoadPanelEx
I get an 'Error in the call to LoadpanelEx' error when running the application.
Based on the post here I the determination of objectives-> need to export, the value "symbols marked for export. I created the output DLL.
In teststand, that the error in the step that calls the function 'InitializeBatchDialog' and the East - 94 returned error code.
It comes
int DLLEXPORT _stdcall InitializeBatchDialog (CAObjHandle modelData, CAObjHandle context)
{
...
}
Only the additon to C code was to add a few reminders of control.
Solved
Under the establishment of objectives "Embed project. Setting the IUR"was necessary.
Tags: NI Software
Similar Questions
-
I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.
But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!
(And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)
Hello
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
- In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- In Firefox 29,0 and above, click on the menu button
-
error when calling NtSetTimerResolution in NTDLL 1097. DLL
I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why? I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.
This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)
NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.
NTSTATUS NtSetTimerResolution (
IN ULONG RequestedResolution,
IN BOOLEAN defined.
ON PULONG ActualResolution
);Parameters
RequestedResolution
The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.
Set
This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.
ActualResolution
The resolution of timer in effect once the call is returned in this parameter.
Woohoo! I solved the problem.
I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)
instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).
An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it! I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version. WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.
In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.
You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.
Rgds
-
Error 2503 called RunScript is not marked in progress
Cannot add or remove programs, always get this - "error 2503 called runscript is not marked in progress" the date in Windows Vista SP2 is set correctly. In my view, that this error occurred initially during the installation of an upgrade of the program. I also set permissions of files to show the files hidden by a suggestion. I'm at a standstill, any help is appreciated.
Hi ALSJeff,
O which program are you trying to install or uninstall?
This problem occurs if the date is incorrect. Since you've already tried, try the following steps.
Step 1
Use the windows Cleanup utility to uninstall programs and then install the required programs.
http://support.Microsoft.com/kb/290301Step 2
Try to activate the built-in Administrator account and check if you are able to install or uninstall programs successfully.
http://support.Microsoft.com/kb/555910
Try these steps and let us know the result.
Bindu S -Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Windows email will not be printed and give this message "email error unexpected call to the method"
Windows email will not be printed and give this message "email error unexpected call to the method"
is there a solution for this?
Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method. Check my IE and it's IE8.
Problem solved!
Thanks for the replies.
Neal -
: Error 35 call external function of the object
I get "error 35: error when calling external object function driverinit on line 302 of the event open"and impossible to open a program. " A few solutions that I found for this search refer to an update to the SQL Server. The only thing I tried to do lately is to update a printer driver, all was working fine before this. I got an SQL error on a website trying to access the FAQ section. I found an article to download an update to the original version of SQL Server 2005 SP2 but not sure if that's what I really do. Can anyone help?
CRTet,
Error 35 is not a common Windows error. It is very likely that the registry scanner above will only cause more problems.The error you get is from your application. Given that this is not generated by Windows, I highly recommend directly contacting the support of bookkeeper.Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
While the export of database complete expdp following errors show?
Start "SYSTEM". "" EXPORT_JOB_150506150137 ":
Current estimation using BLOCKS method...
Treatment of DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA object type
Total estimation using BLOCKS method: 2,906 GB
Object DATABASE_EXPORT/TABLESPACE of treatment type
Type of object DATABASE_EXPORT/PROFILE of treatment
Treatment of DATABASE_EXPORT/SYS_USER/USER object type
Treatment of type of object DATABASE_EXPORT/SCHEMA/TYPE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT
Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
ORA-39127: unexpected error in call to 'WMSYS '. "" "" LT_EXPORT_PKG '. "" SYSTEM_INFO_EXP ".
ORA-44002: incorrect object name
ORA-06512: at "SYS." DBMS_ASSERT", line 383
ORA-06512: at "SYS." Dbms_metadata", line 10079
Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, POST_SYSTEM_ACTIONS, PROCACT_SYSTEM
SQL > select * from v version $;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
PL/SQL Release 11.2.0.4.0 - Production
CORE Production 11.2.0.4.0
AMT for 64-bit Windows: Version 11.2.0.4.0 - Production
NLSRTL Version 11.2.0.4.0 - Production
SQL > select * FROM SYS. EXPPKGACT$ WHERE SCHEMA = "WMSYS";
LEVEL OF SCHEMA PACKAGE CLASS #.
------------------------------ --------------- ---------- ----------
LT_EXPORT_PKG 1 1000 WMSYS
LT_EXPORT_PKG 2 1000 WMSYS
-------------------------------------------------------------------------
expdp
Export: Release 11.2.0.4.0 - Production Wednesday, may 6, 16:11:43 2015
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
---------------------------------------------------------------------------
Operating system == > > Windows server 2008 R2 Enterprise Edition.
RAJESH. PK
Hello
Conn / as sysdba
create the table sys.exppkgact$ _backup in select * from sys.exppkgact$;
remove the sys.exppkgact$ where package = "LT_EXPORT_PKG";
commit;Run the new expdp
'This eliminated error' now
Thank you Top.Gun your fast support.
Rajesh
-
LabVIEW:EXE generates the error 1003 calling plugin with the type definition
Hi all
I am running LV 2012 on a Win 7 machine. I had this same problem with LV 2011, so I'm sure that's not associated with version/upgrade.
Go to a LV-built EXE, I try to call a dynamically loaded Subvi. I did it several times with success before, so I think I know how. I prefer to use the call by reference, but I get the error 1003 Open Ref VI (with the type specifier). If I use the type specifier, can I open the Subvi, but the State is listed as 'bad '. Then, I went to recursively through all the subVIs (~ 25 in total) and concluded that the only item with a status of 'Bad' was a type definition.
I checked several times, several different, that all ways the subVIs (and the definition of Type 'bad') are available to the Subvi dynamics. I did that the type definition is correct. I have also made sure the subVIs are stored as .VI files in the same directory and not within an EXE file. When I try to run the VI run call node, I still get the error 1003. I checked the path that displays in the error dialog box is the exact path for the Subvi (it would be for other VI properties and methods working properly).
Why can't I run a sub - VI loaded dynamically from an executable if it has a type (a group of 3 trails) as output parameter definition?
I just tested an idea: rename the library from project to project A create script. Now when it loads, it does not disturb what he must internally with externally called Subvi (dynamic). It worked the first time!
-
Anyone who has already seen this error when calling a dll? "Arbitrary.dll?"
Hey people, I enclose a jpg of the error I get whenever I try and load a vi whose subVIs call a 'library function call '.
"Double click call function I can check that the ' name of the library or the path ' is correct, and the function name is what I want.
I do not understand why it tells me I need to "Arbitrary.dll" - the name of the lib is adwgc.dll as shown in the path (I checked).
Anyone who deals with this error before? I am naïve enough at the moment, any help will be appreciatized and surely kudo would be!
Thank you
-pat
Edit-also, I'm using LV 2011
You get this error because adwgc.dll is responsible Arbitrary.dll because internally that whoever wrote adwgc.dll called a function in Arbitrary.dll. Is the only one with this problem to obtain Arbitrary.dll and place it in a folder that adwgc.dll can load it. Put it in the same folder as adwgc.dll should work.
Where did you get adwgc.dll to and are you sure they provide Arbitrary.dll as well?
-
Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.
I have an existing Office RT system running RT 2009. This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.
Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.
I also noticed that the message on the screen connected to the RT system during startup:
"achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.
Any ideas on this problem? It is perhaps as simple as a switch in the compiler?
Thank you.
I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.
I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.
-
error 1390 (calling a VI, which was originally copied from a library)
Error States 1390: "you tried to open a VI server reference to a VI out of reach. A VI can open the VI server that references to the other screws that she could call subVIs. After the opening of the reference, this VI may return the reference to the other screws which could not normally open the reference. "
I am trying to execute programmatically a VI I copy while the original VI belongs to a library.
Error occurred when I try to open the reference by address of VI.
Of course, after copying, the VI is still belonging to a library, there is therefore an invoke node to disconnect library before you can run, but I'm not able to acquire the reference in the first place.
I note that remove the VI source a library isn't an option at this point.
In this topic has been a similar error, return from 2009, but a solution has never been published.
http://forums.NI.com/T5/LabVIEW/creating-VI-file-programmatically-still-owned-by-LVLIB/m-p/863050
What keeps the reference to object of the acquisition? and is there a solution?
Your approach is the reason for not having. Simply, you copy a VI out of context, but does not update anything else.
You need to duplicate the whole lvlib:
or we need to manage the new copy in the existing lvlib:
hope this helps,
Norbert
-
Call Tech Dept of Win.Op.Sys.Suport has been saying
my computer was sending Of Error Messages
Dennis Clarke cited my CLSID
How did get my phone number?
How did get CLSID from my computer?
Is this a hoax OR an attempt to get (more) into my computer?
Think this will answer your questions - it's a scam similar to that discussed in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/just-had-a-call-regarding-ammyy-admin-is-it/ead4bc40-75a3-4383-b539-7d01a83f32ae
Kind regards...
-
Original title: HELP
{Moderator note: version of Windows has not been confirmed}
In microsoft mail I get the following script error and cannot print emails, then the error lock the computer.
Script error
An error has occurred in the script on this page
Line 215
1 tank
Unexpected call to method or property access
Code 0
URL: res://ieframe.dll/preview.js
Do you want to continue running scripts on this page
Yes No
I can print other documents.
Please help I need to be able to print my emails.
Thank you
Windows Mail uses the Internet Explorer print engine to print. You can print from Internet Explorer? It is possible that your antivirus software might be the cause. You can try to turn off and then restart and see if it will print. Otherwise, you will need to provide more detailed information depending on your version of Windows, what e-mail program, you are using and what version of Internet Explorer you are using.
Steve
-
On Windows 7 when I try to use the icon on the system tray, I get the following error: "Microsoft Visual C++ Runtime Library Runtime Error! "Program: C:\Windows\Explorer.exe R6025 - virtual function call pure" I get every time when I use it but at least twice a week it happens. I have another Explorer not open already.
This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.
Follow the steps below:
Method 1:
If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.
(a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.
(c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.
Step 2
If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.
In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
Package redistributable Visual C++ 2005 (X 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
Visual C++ 2005 (x 64) redistributable package manager
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=enPackage redistributable Microsoft Visual C++ 2008 (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en
Package redistributable Visual C++ 2008 SP1 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=enLet us know if this can help, or if you still need help.
Sincerely,
Marilyn
-
C++ Runtime Error: R6025-call virtual function Pure. How should I do?
Hi all
Usually I can fix issues myself, but since I am here that means this issue has completely baffled me.
ALL UNIQUE web browsers I've tried generates the following runtime error:
Virtual function call R6025 Pure
How I reproduced this error:
1. I was going to my internet Favorites Trance station radio available here:
http://www.trancearoundtheworld.com/2. of course, I clicked on the 'Play' button and a new window opens with a simple player with a play/pause button.
3. I press the symbol key "Pause" and breaks of the song/flow, and a few seconds later the above mentioned runtime error is displayed, with an option to click on OK:
Runtime error!
Program: C:\Program Files (x 86)-[internet browser here]------[browser executable here.exe]
R6025
-pure virtual function call4. click on OK only recognizes the error and closes the browser.
Again, this happens in EVERY single browser, I know, whether it's IE8, Firefox, Safari, Google Chrome and Opera.
I can only assume it is a problem of run-time library, so I tried to download and reinstall the 2008 redistributable package sp1 x 64 edition as well as the x 86 edition, restarted the computer, and the problem still persists.
I tried these same steps with my laptop and it works fine (read: he doesn't have this problem, or it crashed). This is only my office who is having this problem.
Is there a way I can fix this?
Thanks in advance!
System information:
Windows 7 Professional 64 bit
Intel Core 2 Duo E6850 3.00 GHz
4 GB OF RAM
Hard drive 160 GBSilly me, it seems that what causes this error is NOT corruption all Runtime library or something similar. This error kept happening because I was currently using 10.1 beta version of Adobe's Flash plugin. Once I completely deleted and installed the latest stable version, all is well until now.
Please keep in mind, this is how I solved my problem. If you receive the same error, there may be several ways to fix it. Mine was due to a Flash. If anyone has this problem, please report it and talk about the action you did if you have resolved the problem.
Thank you!
Maybe you are looking for
-
My phone is not apple why pay?
-
Why I can't save this file?
Hello! I'm having some trouble with this file of labview. I want to create a loop of 16 sequences stacked the same controls that includes two linear actuator and valve 12 controls (the files are attached below). Each sequence of the 16 sequential sta
-
Cannot open files with Windows Vista Edition .hlp Home Premium
I installed winhlp32.exe, but I can't always open up .hlp files. I get the same error as before the installation of winhlp32.exe. I rebooted my system.
-
Wireless Internet not working not not after installing SP3
I just got a functioning Compac Presario 2100 'pass me' WIndows XP. My father put it back to factory settings. I use a LAN Intellinet wireless Super G pc card 802.11 g wireless to connect to my access point to the House. The first day it worked fine
-
How to shorten the music file to match the selected slides
I created a slide show with windows vista movie maker. How to shorten the music files to match both of the selected slides. Using the fade out option did not work