Error in deployment of Simulator for the 10 Blacbkerry 'synchronization and application launch.

I use Momentics® IDE for BlackBerry Version: 2.0 Build id: v201310251603 with Simulator10.1.0.4828.

Momentics seems to connect and paired with success to the Simulator. When I click "Run", it starts the process of packaging and deployment, but get the error in "synchronization and launch the application" part. There are different errors but no useful information in the dialog box. Here are two samples

Failure of deployment: Info: failed to get a connection QConn, sync disabled
Info: Sync disabled, packaging full bar required for installation
Info: Sending request: INSTALL_AND_LAUNCH
Info: Action: install and launch
News: Native debugging: on
Info: File size: 304312
Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
Info: Treatment 304312 bytes

#2

Failure of deployment: Info: try using the synchronization failed: connection reset
Info: Sync disabled, packaging full bar required for installation
Info: Sending request: INSTALL_AND_LAUNCH
Info: Action: install and launch
News: Native debugging: on
Info: File size: 304312
Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
Info: Treatment 304312 bytes

 

Please refer to this article for more information about this problem and a workaround.  Note that this problem is resolved in the new versions of BlackBerry 10.

Application deployment can hang or fail after OTA update to 10.1

Tags: BlackBerry Developers

Similar Questions

  • Application error "not enough of space for the environment" in Vista.

    Could not find the right answers out there for this problem. Application error "not enough of space for the environment '. I am running Windows Vista Home Premium. Thanks for your help!

    I suggest you try compatibility mode.
    If the program is not compatible, then you try to install and run the program in compatibility mode.
    Use the following steps:
    (1) right click on the program
    2) click Properties
    3) click on the Compatibility tab
    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

    If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

    Let us know if that helps.

    Marilyn

  • wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter.

    Hi all

    I have a data file where there is a wcm:element like below

    < wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>

    So, I get an exception to content server


    Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]

    An error has occurred. The stack trace below shows more information.

    !csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.

    intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage

    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)

    at intradoc.server.Service.buildServiceException(Service.java:2271)

    at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)

    at intradoc.server.Service.createServiceException(Service.java:2260)

    at intradoc.server.Service.buildResponsePage(Service.java:1314)

    at intradoc.server.Service.doResponse(Service.java:2076)

    at intradoc.server.FileService.doResponse(FileService.java:1469)

    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)

    at intradoc.server.Service.doRequest(Service.java:1890)

    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)

    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

    at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

    to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl

    at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

    at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

    at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

    at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

    at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)

    at intradoc.server.Service.buildResponsePage(Service.java:1267)

    ... more than 10

    Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx

    * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

    ! csDynHTMLNoStack! $

    !csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$

    -& #62;      & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;

    in sitestudio. SSClassHelper.invoke (unknown Source)

    in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)

    in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)

    in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)

    at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

    ... more than 17

    Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError

    at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

    at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

    at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

    at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

    at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)

    at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)

    at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)

    at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)

    at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    in sitestudio. SSClassHelper.invokeRaw (unknown Source)

    ... 23 more

    Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.

    * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

    ! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$

    ! csDynHTMLServerScriptEvalError

    in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)

    at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

    Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.

    Concerning

    I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).

    At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).

    If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?

    Jonathan

    https://jonathanhult.com

  • A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version

    A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version. Please provide the solution to install the software. I have the license keys to install it.

    Hi rkcy100

    Please visit: http://forums.adobe.com/message/4562902

    http://forums.Adobe.com/message/4811565

  • Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

    People,

    I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

    Here's the context:

    We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

    We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

    VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

    Here's the problem:

    I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

    The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

    I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

    "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

    After searching around, I found the following hotfixes to the U2 release notes

    • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

    • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

    I've made these changes, and I still get the same error.

    When I dig in the newspaper, I see these entries in the journal of vmkwarning:

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

    At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

    Any help would be greatly appreciated...

    Thanks in advance.

    Alvin

    The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

    See if that helps the issue.

    Mike

  • After using the iphone app, I get error: "unable to get labels for the script.

    Hello

    I think that this is related to the iphone app for Adobe Story. I added some comments on my script using the application, now when I try and open my script, I get an error; "Unable to get labels for the script.

    I tried Internet Explorer 9 and the desktop application. Both produce the same error.

    The script is completed to 55 pages, so I really don't want to lose...

    Thank you

    Hi Chris,

    We have fixed the problem and shared the document with you back. You can accept the notification, copy the document into a new (to be an owner) and work on it now. Meanwhile, we will also investigate why the problem occurred at all.

    Sorry for the inconvinience.

    Kind regards

    Sunny

  • Hi I have just signed up for the Apple's music and I forgot to cancel my game from itunes (it is no longer needed) who crossed just automatically - how to cancel the game and can get a refund?

    Hi I have just signed up for the Apple's music and I forgot to cancel my game from itunes (it is no longer needed) who crossed just automatically - how to cancel the game and can get a refund?

    To stop renewing, login to your account (for example by tapping your id settings > iTunes & App Store on your iPad, or by clicking on your name / icon to the top right of the iTunes on iTunes on your computer screen), and go to the iTunes in the cloud Section - see to halfway down this page: subscribe to iTunes game - Apple Support

    In terms of refund, try to contact iTunes Support and see if this will change (purchases are considered final), either via http://reportaproblem.apple.com or http://www.apple.com/support/itunes/contact/

  • Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

    PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

    On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

    Hi carmol,.

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

    Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cascades: How to set the background image for the menu drop down and etc...

    Hello

    Is there an easy way to set the background image for the menu drop down and etc, current support only black as a background?

    Thank you

    Tom.

    Welcome to the forums!

    This is currently not supported unfortunately.

    I encourage you to save a feature for this request:

    https://www.BlackBerry.com/JIRA/secure/dashboard.jspa

    See you soon!

    Martin

  • Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?

    Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?

    Thank you

    Only ID authorized to use the software is the ID of the software license.

    Transfer an Adobe product license

  • someone from adobe can help immediately please?  I've already paid for the 1 year plan and your system tells me that I have only 30 days trial

    someone from adobe can help immediately please?  I've already paid for the 1 year plan and your system tells me that I have only 30 days trial

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    .

    If Yes

    Some general information for a subscription of cloud

    Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • its ridiculous... I asked for the plan a month and cloud it recharges on a monthly basis and now when I try to cancel the membership that it does not show the desired option...

    its ridiculous... I asked for the plan a month and cloud it recharges on a monthly basis and now when I try to cancel the membership that it does not show the desired option...

    Cancel your membership creative cloud

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

    https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  • Hi, I'm on cloud creative $49.99 for the month of subscription and I am told it includes Typekit, but when I try to log it asks what plan I want to?

    Hi, I'm on cloud creative $49.99 for the month of subscription and I am told it includes Typekit, but when I try to log it asks what plan I want to?

    Please see

    Hope this will help you to use typekit.

    Kind regards

    Hervé Khare

  • Re: CSS external style; I finished a Web site for the class (html 5 and I forgot to select the external CSS stylesheet; do I have to redo the project in Dreamweaver CS6)

    Hello

    Re: External CSS to model; I finished a Web site for the class (html 5 and I forgot to select the external CSS stylesheet; do I have to redo the project in Dreamweaver CS6)

    In 2015, CC, you can do the following...

    1. turn highlight everything between your

  • I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

    I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

    If you have downloaded from here: Download CS5.5 products, please see the instructions to extract the files and install your product.

    Alternatively, you can download it here:

    http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

    Guinot

Maybe you are looking for

  • Satellite A300-15 b - graphic problem Counter Strike game

    Hello I have a laptop Satellite A300-15 b, but in Windows 7, I have a problem with the graphics in some game.Not much true game problem requiring a cut, I don't know what the problem is, I tried the latest drivers, but the problem is always the same.

  • Try to copy MP3 files to an audio disc using Disc Creator

    I'm trying to copy MP3 files to an audio disc using Disc Creator.I can find the audio file that I want to copy but do not appear in the Source window.

  • Failed to read tracks in windows media player.

    Original title: UNABLE TO PLAY the TITLES FOR SOME UNKNOWN REASON, WHEN I SELECT MOST OF THE TRACKS ON MY MEDIA PLAYER 11 A SYMBLE RED WATCH UNABLE TO PLAY STATNG REINSTALL PLAYER HAVE TRIED THIS WORK HAVE TRIED SGNING AS ADMINISTRATOR TO ROLL AT 10

  • Quick Simple setBackground for any HorizontalFieldManager

    Hey, a quick. I just want my color background for the whole line, which corresponds to the width of the screen of the device. I add fields to my HorizontalFieldManager, but their widths vary. I have white gaps on the right side. The setBackground met

  • empty space above the video tracks in the sequence window

    Hi, I like to use Premiere Pro, but like almost everyone else I have irritating things during use. When I resize the window of the sequence trying to see all the tracks video and audi, I get this empty space above my video tracks. Could not find the