error in FoxPro 2.6 autoexec.nt

Running Windows XP Home Edition Version 5.1

When you try to load FOXPRO 2.6 for DOS a window entitled "Subsysem of MS-DOS 16-bit" with the text "the file system is not running MS-DOS or Microsoft Windows applications.  Chose 'Close' to terminate the application."

There is a reference to the Autoexec. NT

NOTE: The same message appears when you try to open a DOS window, with a reference to COMMAND.COM

What should I do to correct the problem?

Windows XP with no BACK, you need to install a DOS program.

Tags: Windows

Similar Questions

  • FoxPro 9 error message. "Data type mismatch.

    Hello

    In front-end, when I opened a second menu there is an error message "data type mismatch. How can you fix this bug?

    Kind regards
    Esyrom

    [Moved from comments]

    Hello

    Try the FoxPro Forum

    http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

    Don

  • Visual Foxpro Professional error: "not enough memory".

    AFTER THAT I INSTALLED VISUAL FOXPRO PROFESSIONAL VER 3.0 ERROR NOT ENOUGH MEMORY WHEN I SPEAR VFP

    Original title:

    After I installed Visual Foxpro Professional I get "Out of memory" when I when I run.

    Hello

    After you have installed microsoft visual foxpro 3.0 on my windows xp pro service pack 2 computer it was successful but when I run the program (visual foxpro 3.0), it won't work and it says insufficient memory.
    pls help...

    TNX

    Danny

    Hey Danny,

    You can see the steps from the following link and check if it works:
    FIX: Out of memory in Visual FoxPro on fast computers
    http://support.Microsoft.com/kb/179287
    You can also consult the following link:
    Troubleshooting memory errors
    http://support.Microsoft.com/kb/112676

    Let us know if it helps!

  • I get the following error message "error of compilation in the hidden module: autoexec.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Messages of ideas: error

    "error of compilation in the hidden module: autoexec.

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi rsfin,

    ·        When exactly do you get this error message?

    ·        You did it all change hardware or software on your computer before this problem?

    If you get the error message in Microsoft Word or Excel, you can follow this link.

    You receive an error message "Error in the module hidden compilation" when you start Word or Excel

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • FoxPro .dbf database error message

    Hello people,

    I have a customer who received an error message when applying Insider Foxpro, Foxpro v9.0 error msg: "Unrecognized Database Format".

    My client has pointed out, that there has been a power failure and the problem emerged after it has restarted the PC.

    It seems that corruption the foxpro database caused by a power failure.

    Suggestions, friends...


    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Error display chronogram Foxpro

    I came across this error "ByteArray objects cannot be converted to strings" when I tried out of values in a column in a Visual Foxpro table. The cfquery ran ok. Here's my overall situation.

    ColdFusion 7.0.2 Server standard version
    ODBC data source is Microsoft Visual Foxpro driver version version 6.01.8629.01
    SQL command is
    SELECT COCDCL
    OF COE3002
    WHERE ECONOMIC = "ELECTRICITY".

    COCDCL is the column of Visual Foxpro data type of 12 (size) character

    It seems to me that if the size of the character field is 10 or less, it will work. Is this a problem with the Microsoft for Visual Foxpro ODBC driver? What can I do to work around this problem?

    According to MSDN , you probably provide accurate for this type of data.

    CAST (eExpression AS cDataType [(nFieldWidth [, nPrecision])] [NULL |]) NON-NULL])

    Phil

  • After installation of XP SP3 error, "cannot locate the Microsoft FoxPro support library".

    I've recently updated to service pack 3. When I try to open a program I use, it says "Cannot locate the Microsoft FoxPro support library". The program is run when I had service pack 2. Am I missing something with service pack 3?

    Hello

    Post your query in Visual FoxPro forums to improve the assistance:

    http://social.msdn.Microsoft.com/forums/en-us/visualfoxprogeneral/threads

    You can check the link where another customer a similar question below:

    http://social.msdn.Microsoft.com/forums/en-us/visualfoxprogeneral/thread/57918732-e804-456a-B506-6eaf0dc75bd5/

  • Saver 0x47f on power satellite fatal error code

    Hello

    I have a problem with energy saving on my satellite.

    When windows starts up a box appears saying ' program error fatal toshiba power saver will end. 0x47f error code»

    I tried to use the cd tols and utilities to try to reinstall the program saving energy, but when I click on setup on the interface, a box pops up saying

    C:\WINDOWS\SYSTEM32\AUTEXEC. NT. The system file is not for windows applications running msdos and Microsoft. Choose close to terminate the application.

    I tried to install from the msdos also command prompt but no luck it has the same message.

    Can anyone help?

    Hello

    This error message can occur if one or more of the following files are missing or damaged:
    -Config.nt
    -Autoexec.nt
    -Command.com

    I found this info useful here in this Microsoft Knowledge base article
    http://support.Microsoft.com/kb/324767

    try to repair the Autoexec.nt file and after new reboot you might to reinstall the Toshiba Power saver again!

  • Error loading on my satellite 4080CDT

    Impossible to restart my 4080CDT satellite directly.
    The message is:

    Error loading! Press any key to restart

    I was finally able to restart with a floppy disk 1.44Mo on three files which are: bootfont.ini, ndetect.com, ntldr and boot.ini.

    Without this startup disk, the message load error.
    Can someone help me?
    Thank you.

    Hi manu1,.

    Here's a solution:
    -try to boot in the saving Mode option;
    -in the Mode of economy option delete content
    of the following cards: Temp, the browser Cache, history,.
    Web pages offline, temporary Internet files, recent;
    -move your temporary Autoexec.bat file somewhere else as another card;
    -use the disk cleanup tool.
    -Reboot your system;
    -Check your system with a Virusscanner update after you fix the problem.
    After is it possible to restart without rebootdisk?
    Let me know,
    Good luck

    Stef

  • MS-DOS 16-bit on Satellite 1110 subsystem error

    Hello.
    Please help with this problem as im very desperate for any ideas.the problem started when the computer started to say a proper dvd decoder has not been installed, and it would not play dvds.then the driver for my dvd player 'arrested' work or disappeared as when I tried to open the drive it couldn't find the right file to do so.

    probably because of my attempt at fixing. I tried to fix this by reinstalling the victory program dvd I got with the laptop but I received a "serious error" message, "this is not a qualified toshiba machine" + 16 bit subsystem ms - dos "C:\windows\system32\cmd.exe" (next line)'(next line) 'C:\windows\system32\autoexec.nt the system file is not suitable for running MS-DOS or window applications. Ive got the error of subsystem ms - dos 16-bit before just now when try to install something else, but thought it was because of the compatibility programs.
    any help is greatly appreciated.
    Thank you.
    Robby (sorry for the huge post)

    Hello

    your Satellite 1110 has normally no hardware DVD decoder, so your system wants a software decoder as WinDVD.
    Your problem seems to be that your operating system is not the OEM of Recoverz from Toshiba version because the delivered WinDVD CD only works with it!

    The best way to solve your problems is to recover the laptop and install the Toshiba WinDVD, but before you do this save all your important data as it will be deleted!

    After this procedure, your system should work fast and stable!

    Good bye

  • Windows 2000 Setup error

    Hi, I have a Toshiba Tecra 730cdt I'm trying to install windows 2000. When I get to a point in the proses

    It stops and gives me the following error message:

    Fatal error:

    Setup could not retrieve the ID of the product due to the following error:

    RegQueryValueEx returned for invalid data [type = 1], or the nest has an invalid length [length = 8].

    ***

    Fatal error:

    Setup could not retrieve the Identification of the system product that you are installing

    Support for windows 2000 may be damaged

    Please contacct Product Support

    ***

    Once the system is rebooted, it shows a screen saying that the installation has been restarted and enters this loop hole

    I was wondering how to fix this error because I used a different windows 2000 disk and got THE SAME ERROR

    ANY help would be appreciated!

    How to modify the Config.sys and Autoexec.bat files

    http://support.Microsoft.com/kb/232558/en-us

  • then I typed C:\ type autoexec.bat and it's the only entrance... The file dummy __REM NTVDMPATH = % PATH %; C:\PROGRA~1\COMMON~1\MVEET~1\030625

    I am running windows vista on a computer hp Pavilion dv6500 laptop.  I had a problems of memory processor very high for months.  I did all the usual, uninstalling programs, etc and I noticed there are some programs norton on my page of uninstallers but no information after them and no way to uninstall them.  Norton Internet Security in figure 5 times, Norton Protection Center, SymNet, AppCore, ccCommon, Norton Confidential Web Protection, Norton Confidential component browser and MSRedist.  As I said, there is not any information thereon.  There are two other programs, Zune Language Pack (FR) 356 KB and Microsoft Office Proof (French) 2007 and they either uninstall when you click it.

    I went to services and found symantic programs. They seem that they have taken and the performance of my computer.

    Host of COM... dependencies of RPC and DCOM
    "c:\Program Files\Common Symantec Shared\VAScanner\comHost.exe"
    System application COM dep..com event system, RPC, dcom, rpc C:\Windows\system32\dllhost.exe /Processid system events notification service: {02D4B3F1-FD88-11D1-960D-00805FC79235

    Netlogon for my workstation does NOT START

    Service Symantec AppCore dep - rpc, dcom Symantec Settings Manager rpc and dcom "c:\Program Files\Common Symantec Shared\AppCore\AppSvc32.exe"
    Symantec Core LC dep - rpc and dcom "C:\Program Files\Common Symantec Shared\CCPD-LC\symlcsvc.exe"

    There's more... So of course, I stopped all these services and rebooted.  I had to go into safe mode, restore did not work and I remember not even how I got my computer to work again.  It took hours.

    I got a list of services and settings of Microsoft and went through all the new and reset to recommended.   When I rebooted, there was a bright yellow screen, my computer took a few minutes to start and it worked... but not internet access.  Only local services.

    I run norton security tool and found this error message in my documents listed under ccErrDspLog

    ... christines\christine: 2008-09-28-04-34-36-503: NIS: 10.2.0.30: English: Norton Internet Security Error: required by Norton Internet Security virus definitions are not valid. You cannot run a scan until this issue is resolved. : 3 038 100: http://www.symantec.com/techsupp/servlet/ProductMessages?module=3038&error=100&language=English&product=NIS&version=10.2.0.30&build=HPQ_60D

    It is listed over and over again, and it's been long that I ran this program.   I also tried the norton removal tool and which does not work either.
    So I restored again and now my computer works but still the high memory and cpu usage.

    I'll be back on my 486 days and at the command prompt.  I typed
    Config.sys type C:\
    and the only thing listed is FILES = 40

    then I typed C:\ type autoexec.bat and it's the only entrance...
    ..
    NTVDMPATH in the file REM Dummy = % PATH %; C:\PROGRA~1\COMMON~1\MVEET~1\030625

    I know that this is not normal... Anyone know what it is?  I would just reinstall, a great fight, but not to big, but I want to know what it is and where it comes from?   Thanks for any advice.

    First of all, autoexec.bat is not used in Vista. Try to use the Norton removal tool to get rid of all Symantec programs.

    Norton Removal Tool - http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2005033108162039

    MS - MVP - Elephant Boy computers - don't panic!

  • Failed to get the NIC to work - driver code 10 error

    I read a lot of similar posts, but not exactly like mine.  I've tried and failed on the advice given in other posts, so...

    Replaced the HARD drive in Inspiron 1420 my wife, Vista, Intel processor dual core T7250s

    Card Broadcom 802.11n

    Kept all the disks provided with the lappy, Prepped the HD by media rules, support of windows and the mediadirect and resources CD...  they had all autoexecs and seem to go very well.   Unable to connect to the net... He checked out on the technical, found device code 10 failure...  All other drivers seem to have loaded...

    tried to update the driver...  He said that she already had the appropriate driver. -do not

    DLed the driver Broadcom to one inch and installed - no difference.  Restarted... many times during all this.

    Read here we could install order - thought I might try manually.  Searched drivers Intel T7250... here, "currently unavailable".

    what Miss me?

    Hello! do not have the error code 10, but got a message from "driver or hardware related problems. use to have wifi hook up last week, also said driver Broadcom 802.11 > NO FIXED.

    ABSN ADAPTER WIRELESS SDIO, HELP I'M LOST AND CAN'T USE THE 10 PRO 5056 PLACE!

    THANK YOU BOB MAC

  • Cannot find the Microsoft Visual FoxPro support library; prevent a program from running

    Hello. I'm running a Dell Inspiron (2010, do not have the numerical values of product stored) with Windows 7 64 bit. I tried to move a prgram ovever in that I saved from a portable 03, happened very well, who also ran fine on a USB key and active through the computer its plugged. The prgram is a software of database for model called yard Office Trains, but that doesn't mean much. I had to reset factory the laptop video driver problems do not allow videos unfold and had not run yard Office before that. However, now, when I try to run post yard, it gives me the error in the title. I tried compatibility for MS03, with and without the servicepacks. None of those worked either, so I'm missing a manifest file that was on these systems. I don't know but something on FoxPro beyond that. I tried searching on Google (preferably on Bing. Sorry guys) and did not understand what said the Web site, beyond, looks like I have to buy something that I would have already.

    Fat. Chance.

    It's enitrely possible; e something has failed in the downloads when Dell reset me. In addition, I don't know anything else and rely on you for advice. Thanks in advance!

    Hello, Morgan D,.

    If the update program does not run, you could try and do a scannow to check any file system errors. If this does not help, you may need to use a virtual program for older software to run.

    First of all, we run System File Checker to see if you have a corrupt file system.

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any violation of the integrity and repair any damaged operating system files.

    Reboot your system.

    If this does not help, then read the following information.
    If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

    If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware (www.vmware.com) Player and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • 'Documents' folder (plain text) Foxpro. PRG files and cannot search for find in files

    I have 64 bit Win7 Pro.

    I have a C:\Users\Owner\Documents\PRG folder with a number of Foxpro. PRG (plain text) files.  I can't get Windows Search to search for files.  For example, several files have the command "TO PAINT" in them.  If I bring up an Explorer window and use PAINT, I just get 3 file names that have PAINT in them without a content search.  I've read other suggestions to use ' content: 'paint' ' but that no results me at all.  I tried another suggestion: a window withCMD searchFile-name: "*." ' * ' - content: "painting" and got an error that says'searchFile' is not recognized as internal or external, command an executable program or batch file.

    I have to install a UNIX client to get a search utility that can find things I need?  At this point, I'll take something that actually works.

    If you type a Search in the research area, scroll down to change the way Windows search. The first page allows you to change the folders that are included in the search.  Under the buttonAdvanced -> File Types , you can select which extensions are included in the search.  You can also add a new extension if it is not listed.

    See you soon,.

    Barbara

Maybe you are looking for