"Error in initVXIlibrary. Impossible for kernel init device drivers. »

Hi all

I'm trying to fix a WAYBACK test system - running windows 3.11 with CVI talk to a box of 1261 B VXI Racal. Everything was fine until a VXI power capacitor has failed.  Astronics got the p/s fixed in a few weeks, but nothing has worked right since.

Common symptoms are without note errors on VXI diagnostics display, but when the CVI application tries to start up we get the error message fatal "error in library VXI init. Impossible for kernel init device drivers. »

I think that the message indicates a failure of communication between the communication MXI, one in the PC and the other cards in the VXI.  We tested both cards in another system and they work fine.  RESMAN does not Windows run and I have a DOS version to try.

Someone at - he a clue as to what means the error message or what could cause this problem?  I drive 500 miles from Pittsburgh PA to Rochester NY Sunday to get their hands on this machine again and sure could use some help...

Big thanks,

Clancy

WELL THE PROBLEM HAS BEEN SOLVED, IF NOT UNDERSTOOD - AT THE SUGGESTION OF THE SELLER, WE REINSTALLED THE DRIVERS VXI KIT.  HE TOOK SOME PLAYING WITH THE UTILITIES THAT WERE INCLUDED IN THE KIT, BUT THE THING SUDDENLY STARTED WORKING FINE.  I THINK THAT SOMETHING JUST NEED RESET AND THE RE - UP PILOT DID...

Tags: NI Products

Similar Questions

  • Windows XP - NICs has error code 10 - impossible to start this device.

    I tried to install McAfee 2011 on my pc and now I can't access the internet. I am running XP. Explore the msg on the internet says no card no installed wireless network. I checked the properties of the network connection and found one of the adapters network error code 10 - impossible to start this device. Since I have more access to internet to download the drivers, etc., how can I fix this problem?

    Hello

    I suggest you to download the latest network adapter driver by using another computer and transfer to the computer that is causing this problem and install the same.

    For more information about the error 10 code refer article.
    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104

  • Adding new SCSI controller: "error string: invalid operation for the '0' device.»

    Hello

    I have a problem when I try to add a SCSI controller to a virtual machine.

    I have this error:

    Error string: invalid operation for the device '0'.

    Lack of details: InvalidDeviceOperation

    Here is my code:

    my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");

    my $controller = VirtualLsiLogicController-> new)

    deviceInfo = > $info,

    scsiCtlrUnitNumber = > '7'.

    sharedBus = > VirtualSCSISharing-> new ('noSharing'),

    busNumber = >-1,

    key = >-1,

    backup = > $backing_info,

    controllerKey = > 100,

    );

    My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)

    device = > $controller,

    fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').

    );

    My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);

    {eval

    $vm_view-> ReconfigVM (spec = > $vmspec);

    Util::trace (0, "Controller has been created. \n") ;

    };

    I don't know how to handle, or even how to solve problems.

    Any ideas would be greatly appreciated.

    Kind regards

    Jeremy

    I finally found a solution.

    It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

    Here's the code used:

    My = $controller_spec

    VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

    device-online [0],

    busNumber => $scsi_controller.

    sharedBus => VirtualSCSISharing-> new ('noSharing')),

    operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

    My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

    {eval

    $vm_view-> ReconfigVM (spec-online $vmspec);

    };

  • The search for Base system device drivers

    ProBook 6450 b

    WIN8

    With the help of a station.
    Also the HP USB graphic adapter.

    I have 3 listed under other devices:

    1. base system device

    PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01

    VEN_1180 & DEV_E230 & SUBSYS_146D103C

    VEN_1180 & DEV_E230 & CC_088000

    VEN_1180 & DEV_E230 & CC_0880

    2. base system device

    PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01

    VEN_1180 & DEV_E852 & SUBSYS_146D103C

    VEN_1180 & DEV_E852 & CC_088000

    VEN_1180 & DEV_E852 & CC_0880

    3 unknown Device

    REV_0072 & USB\VID_138A & PID_0007

    USB\VID_138A & PID_0007

    Thank you!

    I did some more research on the IDS of devices. the first two are card reading devices, you must download the drivers for the card reader for windows 7 and try editing them. Finally we're finfer sensor print driver.

    you're all here for win7.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4173766&prodTypeId=321957&prodSeriesId=4173642&swLang=13&TaskID=135&swEnvOID=4054

    Good luck!!!

  • help with this error message (load needed DLLs for kernel)

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error message load needed DLLs for kernel in Windows XP
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    ·         When you get this error message?

    Refer to the following articles:

    Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

    http://support.Microsoft.com/kb/812450

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • CS5 Photoshop - Adobe save for Web and devices error

    Hi people,

    I know subjects similar exist, but this one is different. For some reason, out of the blue, I can't use 'Save for Web'. When I choose "save for web", he opens the dialog preview nicely, until I have save & get this error:

    "Adobe save for Web and devices error ."

    Unable to complete this operation. An unknown operating system error has occurred. »

    save4weberror.png

    Deleted all my settings, and the error remains.

    I uninstalled PS CS5, installed again... always get this error.

    I hope someone knows how to solve this problem!

    TX!

    MacBookPro3, 1, running all the updates (OSX 10.6.4), CS5 Master Collection.

    Luckily still have CS4 Master Collection installed (and Flash CS3).

    (I just what to get off my chest, CS5 has so many of the issues that I have stopped using it, I'm not being paid to play. crashtestdummie ) Please don't rush all future collections CS and try to fix bugs instead. )

    It's fixed!

    I deleted this file:

    / Users / ~ / library/Preferences/Adobe/Plugins/Adobe save for Web, Photoshop/CS5/Adobe save for Web CS5 pret.

    (apparently, yet another settings file?)

    I had to do it manually and all is good now.

    TX Jeff for your help, this thread can be closed.

  • Save for Web and devices, the operation could not be completed

    I get this error when I save for Web and devices: the operation could not be performed.

    I saved to the web before for many more complex images, largest and without a hitch.

    I use a psd format with an image that I designed. It is no more complex than others I've done. It is small, just a horizontal navigation bar about the size of the one on Apple's site.

    I tried exporting, flattening, slicing it remove the slices.

    I think it's a problem with the application itself.

    I tried to fix my permissions, restart and held cmd, Opt, Control, Shift when starting PS to reset the settings. Any idea would be appreciated.

    Try to pass like a Flash, and then delete your backup for web Pref.

    http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb405012

  • Equium A60 won't start - error message: Load needed DLLs for kernel

    The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
    Re-install? I made this countless times.

    Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

    Any suggestions on how to deal with this problem will be greatly appreciated.
    Blessings on you.

    Hello

    Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

  • Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

    Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

    I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

    Hi FilippoPosato,
     
    This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
     
    To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
     
    For more information, see:
     
    More information on:
  • Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

    Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

    Hello

    ·          What is the number and the model of the computer?

    ·          What is the service pack installed?

    ·          The meadow of operating system has been installed on the computer?

    ·          Do you remember any changes made on the computer before the show?

    Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

    You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

  • Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Original title: Add/Remove components error and DVD driver error

    Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

    Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

    I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

    Hello
     
     
    Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123
     
     
    Method 1.
    Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems
     
     
    Method 2.
    Also, try the methods listed in the section below and check.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

    Original title: CD/DVD drives do not work after upgrade from XP to Vista

    I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

    Hi krt2,

    In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

    You can try to uninstall and reinstall the driver for the device to solve this problem.

    Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

    a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

    c. on the device properties dialog box, click the driver tab, and then click on uninstall.

    d. restart your computer.

    Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, read the following article and check if that helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    (KEYBOARD ERROR)

    Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    Hello

    I don't know how it happened.

    I tried unistalling the software but have the same problem when connected to e

    Help, please

    Hi Davedirect,

    ·        It's a wired keyboard or a wireless keyboard?

    ·        Who is the manufacturer of keyboard?

    ·        Since when are you facing this problem?

    ·        You did changes to the computer before this problem started?

    ·        Have you tried to restart the computer and check if the keyboard works normally?

    However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

    Step 1

    Remove the drivers from the computer. To remove the drivers to follow the steps below:

    a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

    b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

    Step 2

    During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

    a. Click Start.

    b. access control panel > system > hardware > Device Manager.

    c. open Device Manager and expand the keyboard device.

    d. right-click on the device keyboard and uninstall the device.

    During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

    Step 3

    Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Access the link below to learn more about the error code 38:

    http://support.Microsoft.com/kb/310123

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

    Original title: Need help ASAP please

    Hi all

    I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

    Hello Jay,
    Thanks for posting your question in the Microsoft Community forum.
    The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

    This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

    Don't worry; Let's try a few steps that will help you solve the problem.

    Method 1:
    I suggest you run the fix it and check if it helps.

    Solve problems with programs that cannot be installed or uninstalled
    http://support.Microsoft.com/mats/program_install_and_uninstall

    Method 2:
    If the problem persists, I suggest you try the procedure described in the article and see if it helps.

    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
    http://support.Microsoft.com/kb/2669244
    You can check the links for more information:

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    Original title: Audio recording sound recording microphone

    Hey, if I get this message:

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    {Unable to load device driver}
    HS device driver could not be loaded.
    Error status is 0 x %x

    When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

    There are several models of m6 ENVY

    ENVY m6 -?

    This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
    This is a link to the HP support site to download drivers

    And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems
    Looks like something to remove the registry entries for the driver

Maybe you are looking for

  • New Sites have links send links to other article. Crashes when sending.

    Linux Mint 17. Installed Firefox just to the repository. I have links to send news from various sources. I put in the address and the note in the box and when I click on send, nothing happens. I assumed it was something to do with my computer. I just

  • Download newsgroup messages

    How to download newsgroup messages?When I try to download a message in a discussion forum, I get a window saying: the Message could not be displayed.  Windows Mail encountered an unexpected problem with this message.  Search on your computer lack of

  • Synchronize Outlook calendar to Windows Calendar 8.

    I just installed win8 and would like to sync my Outlook calendar in the calendar of win8.  My iPad and iPhone are sync would be to my Outlook calendar.  I hope you or someone can help because it is not feasible that I see.

  • Re: Cloud creative pn 2 Pc + some applications on mobile devices

    To clarify, (I'm all new to CC) I use CC on my PC, my laptop and my smartphone?  I loaded it on all 3, but am confused if I should be able to access files / collections from one device to the other.  So far, I cannot - I would be able where does each

  • Can I open a project CC with CS5?

    Hello.With the help of project manager, I collected and moved a project created with CC Pro Prem to another machine running CS5.When I try to open the project on the machine of CS5, I get an error message saying the project appears to be damaged and