Error in RE Device Manager. C6380

Similar Questions

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Satellite Pro A120: Corrupt registry - error code 19 Device Manager

  I have a Satellite of A.120 Pro I am trying to charge my Creative Zen Sleek MP3 on it but keep getting a Code 19 registry is corrupted message in the Device Manager. How can I fix it

  Hello

  After a short investigation in the Microsoft Knowledge base, I found this description of the error Code 19:

  ---------------------------------

  Code 19:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.
  To resolve this problem, you can first try running a Troubleshooting Wizard.
  If this does not work, you must uninstall and reinstall the hardware device.

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Try these options:

  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard. Click on uninstall and click Scan for hardware changes to load a usable driver. Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  --------------------------------------------

  I hope this steps will help you!

• Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

  I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

  Hey JP317!

  If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

  So check the site Web of Intel for an update and you should also find Windows 7 drivers.

  If you have any other questions, please let us know!

• WLAN - message "Error 12" in Device Manager

  Hi, in my device for the wireless card Manager, I get: error 12...
  (PCI BUS 3, DEVICE 0, FUNCTION 0)

  IV did a cover 4 times since yesterday and still no difference - I also bought a new wireless card for laptop and still no different - I get always the error message and the computer laptop doesn't detect it, and Texas doesn't report errors.

  Is there a flaw in the portable pc card slot? My 1 year warranty ran out last month.

  Hello

  Well, I can give you a good solution for your problem. Perhaps the fault a PCI card? Have you checked this map in other laptops?
  But if you found another solution, and wireless USB works correctly, in my opinion, you should use it.

  Good bye

• Satellite L300D - error code 19 Device Manager on the CD/DVD drive

  I have a model of Satellite L300D PSLC0E and you just install Windows 7 upgrade from Vista, everything goes well outside the HL-DT-ST DVDRAM GSA-T50N ATA DEVICE and ATI. With the HL - DT - ST DVDRAM GSA - T50N ATA DEVICE this a driver problem, it is said it seems to do with NTI Backup 4, tried to update for NTI Backup now 4.5 but still no luck.

  With ATI I run updates and reinstalled the program, system check, it shows that it is installed and everything works, but I don't seem to be able to change the display settings most important is 1200 x 800, I seem to think that with ATI there should be more, but not sure because when I start to run a set of changes in the size of the screen to 1024 x 768 , and I can't change anything. Any body any ideas?

  Grommitt60

  Hello

  (1) also tried to remove the capital letters and lowerfilters in the registry? In the forum, I noticed that this does not resolve this error code. On the Microsoft Knowledge Base, you can find a solution for this:
  http://support.Microsoft.com/kb/314060

  (2) I also have Satellite L300D and the maximum screen resolution is 1200 x 800. So you can set a higher screen resolution on internal monitor, this is possible on the external monitor.
  And normally, you can change the resolution of the screen in every game. Check this box!

• BT stack install fails - RFBus error-10 in x 32 Vista Device Manager

  Hello

  the Toshiba Bluetooth Stack 5.10.1 Installation fails with my laptop another installed Blutooth 350 Module manufacturing.

  The Bluetooth RFBus driver is marked as error 10 in Device Manager.
  Is that what all I could test/edit to make it work?

  Concerning

  Robert

  Hello RobertHerter,

  i 'don't know what is your model of laptop, but try this:

  -First remove the old version of the battery installed bluetooth - with wireless on

  [Remove battery Bluetooth]

  - Command line:

  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / SB

  - Manually:

  Start the Setup Bluetooth Bluetooth-stack or
  Use "Start-> Control Panel-> Add / Remove programs->.
  Bluetooth Stack for Windows by Toshiba ".

  -Reboot your laptop

  -Make sure that your wireless network is enabled

  -Install the the right version for your notebook - vista 32bits (Bluetooth Stack 5.10.01 Windows 2000 / Windows XP / Windows VISTA)

  -If you have not yet any reboot error.

• I got a virus and now I have no sound. My device manager says that I don't have. I don't know how to solve this problem.

  I have no sound.  I went to my device manager and it says that I have not installed.  I'm not very computer, so I have no idea where to go from here.  If someone could help me I would be very happy!

  Hi ShariKB,

  ·         What is the exact error message in Device Manager?

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  ·         You have security software installed on your computer?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft article and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Hope this information helps.

• Controller PCI Modem & SM Bus these two haveYellow of devices? "s in Device Manager

  PCI Modem & SM Bus controller. These two haveYellow of devices? "s in the Device Manager.

  Just did a clean install of Win XP Pro Service pk 3. Other device driver problems fixed, but am struggeling with two damage previously mentioned.

  Help me please. Thnx Ben

  Hello

  · What is the number and the model of the computer?

  Double-click the device and search for the exact error message or error code in Device Manager.

  You can see the links below and check if it helps: Troubleshooting conflict of devices with Device Manager: http://support.microsoft.com/kb/310126

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• HP Device Manager 4.6 Installation failed: local write error - access denied

  Need help to install the management software Application computer Device Manager 4.6 HP Thinclient

  While doing the custom Setup, I got an error for the language setting. The Error Message says "local write error - access denied.

  How to solve the problem... Please help as soon as possible

  More details if you need:

  I use Windows 2008 R2 Server Operating System - 64 bit [VM]

  I use IIS 6.0 to create FTP Site

  Troubleshooting:

  I tried to install on another Virtual Machine with same Windows 2008 R2 Server Operating System - 64 Bit

  I tried to install the software several times but still facing the same problem

  Any help in this matter would be appreciated

  Kind regards

  K N R K

  Hello

  Please find the fix for the problems

  1 Please download and install HPDM 4.5 and 4.5 SP5

  2 extract HPDM 4.6

  3. start install HPDM 4.6

  a. Select custom

  b. ensure that all HPDM components are checked. Click Next.

  c. accept the default root for the master repository path, or click Browse and navigate to a specific location. Click Next.

  d. click on install. HPDM is now installed.

  e. after the HPDM update is installed, a Configuration of HPDM Wizard appears. Select your language and then click Next

  f. click Search to check the ports and then click Next.

  g. make sure that DHCP server that is not located on this computer is selected and then click Next

  hours of service under start PXE when the gateway, select No and then click Next.

  i. click on run

  j. click Finish.

  ====================================================

  Although I am an employee of HP, I speak for myself and not for HP. ===

  * Click on the star of CONGRATULATIONS on the left say "thank you."

• Drive SD-R6112 are more recognized - 19 Code error in Device Manager

  Hello!

  I have two lenses (one internal, one external) who suddenly are not recognized. Both are appearing in Device Manager with the same error as follows:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  After uninstalling and re - install them both several times, including resetting devices still not change state.

  Currencies are: DVD-ROM TOSHIBA SD - R6112 (internal)
  TSST corp CD/DVGW SH-S182M peripheral USB (external)

  Both devices worked very well the last time I was on my laptop, 2 days ago.

  I guess I have to delete some registry entries, but without details, I'm not going there!
  Can someone help me?

  Thank you very much
  Photographer for customers waiting for pictures...
  Susan DeFurianni

  To my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  As far as I know Microsoft provides these options of solution:

  Click on uninstall and click Scan for hardware changes to load a usable driver.
  Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  In addition, you can try to remove the Upperfilters and the LowersFilters of this registry entry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4 D36E965-E325-11CE-BFC1-08002BE10318}

  If it doesn't help then access Device Manager Reinstalls the channel primary and secondary section ATA/ATAPI IDE controller and reboot.

  Good luck and bye

• ACPI and ACPI DelayMan filter lid display errors in Device Manager

  When I open the Device Manager, under system devices these two have errors associated with them.

  For ACPI DelayMan filter

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  For ACPI lid

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How can I solve this... and what are doing?

  Well... Right-click on the ACPI lid, then choose uninstall the drivers. Do the same for the DelayMan filter. ACPI lid reinstalls itself after reboot and my DelayMan filter returned as an optional choice among the updates of Windows. I hope this helps.

  Oh and I don't know even what delayman filter is actually. As far as I know is that when my ACPI lid had an error, it caused my pc to keep running away when I closed the lid (it doesn't go to sleep or anything over my option "Choose which computer does when the lid is closed" went from wins. Reinstall the driver restored back.