Error in Satellite A135-S7404 - Vista Recovery problem - 10-FC12-0017

Similar Questions

• Satellite A100-803 - Vista recovery problem

  Hello

  I upgraded the RAM and HDD on a Satellite A100-803 and when I restore Windows Vista from the recovery disk process is going very well, but after restarting windows says that "Windows Setup could not set up Windows on this s material.

  I think that the problem is listed here.
  http://support.Microsoft.com/kb/2466753/en-us.

  But the problem is that I can't change the RAID setting in the BIOS, and during the installation of recovery, I'm not able to add the additional drivers needed.
  The new drive is a WD 500 GB driver (WD5000BPVT)

  How can I solve this problem?
  Thanks in advance
  Pau

  Hello

  First I put t think its BIOS problem.
  The laptop doesn't support RAID.

  I think the problem is the size of your new HARD drive. Upgrade of the disk HARD 500 GB and its larger than the original HARD drive equipped in A100.

  The point is that a recovery disk automatically creates the partitions on the HARD disk, but due to the size of the disk HARD the size of the partitions would be different also.
  I think that you won't have the same problems to install Vista or Win 7 using the Microsoft disk

• Satellite A135: Difference between recovery options

  Hello

  I have a Toshiba Satellite A135, OS: Vista Home.

  I'm trying to reformat my laptop using the supplied with my laptop system recovery disk.
  I gives me two options when I run the disc:

  (1) restoration of out-of-box factory State, and
  (2) wipe the hard drive.

  What are the differences between these two options?
  My goal is to make a total of cleaning on my HARD drive to get rid of malware.

  It's a mobile US and so I not quite sure what the exact difference could be m but as I m not wrong the first recovery option set laptop back to the factory settings.
  Another, the second option would be to format the HARD drive only

  If you have tried both options thanks to post the results

  Welcome them

• Need driver for Satellite A135-s7404 for XP WiFi

  Hello

  I use * Toshiba Satellite A135-s7404 * and I want to work on wireless network on * Windows XP *, could so any help kindly I found the * pilot Wi - Fi * for this model on Windows XP... {color: #ff0000} + * it is very important to people * + {color}.

  {Thanks: 8}

  It seems that the AMERICANS support page doesn t offer WXP drivers.
  Do you know what WLAN card has your Satellite inside?

• Re: Satellite A135-S7404: need a link to the XP drivers

  Hello

  I am a new user. I would like to get links to drivers for laptop Toshiba Satellite A135-S7404 for Windows XP. Thank you.

  It seems that this laptop was designed for the American market.
  Therefore, you should use the Toshiba site we download XP driver.

  Here is the link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  If this site does not provide XP drivers so I guess that the drivers are not put right now and you will have to wait.
  If you want n t wait then you can try some single drivers of chip manufacturer's website or other laptops from Toshiba which are fitted with the same features.

• Need drivers Windows XP for Satellite A135-S7404

  Hi I have a satellite A135 and need drivers for XP.
  Where can I find out who...

  Thanks nicklas

  Hello

  I imagine that your Satellite is a portable American model and you can try to find the drivers on http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

• Satellite A300 - and Vista recovery Question

  I bought a Satellite A300 a few days previously, it automatically installed Vista without CD when I opened it.
  Is it joint to come with a vista CD/DVD or I need to burn a Toshiba Recovery disk?

  Pkozerski is right. Toshiba offers no support for recovery with new laptop models and this media must be created using the preinstalled recovery Toshiba creator tool.

  To do this I advise you to use high quality in DVD-R format media. My favorite is TDK or Verbatim.
  If you change anything in the future on your laptop, you'll be able to find your laptop using recovery image stored on the second partition.

  If you need instructions specific to how make it please let me know.

• Satellite A135-S4527 - Windows encountered problem & fails to load

  At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
  Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.

  Fortunately the data is saved, but I have no recovery disks.

  How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
  If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).

  Hello

  As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.

  If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers

  Good bye

• Satellite A300 - 1FC - Vista recovery without any pre-installed software

  Hello

  I bought an A300 - 1FC to German string sotres Saturn.
  It's a computer laptop nice until now the only thing that bothers me is the bunch of preinstalled software that is of no use to me.

  Is it possible to recover the plain windows only and then install all the required drivers
  and service packs manually. Or at least in a way that leaves out all the unnecessary software?

  If not I'm quite willing to downgrade - I don't like vista particularly well anyway but handset
  with the annoyment of the preinstalled software, it is certainly enough reason to get rid of him.

  Any help?

  See you soon

  aurtobi

  Hello

  As you can see Toshiba, like all other manufacturers of portable, offers the recovery image. This recovery image contains all the necessary drivers, Toshiba has designed tools and utilities and also some additional software.

  You must understand that maybe 10% of people have knowledge of PC and they are able to configure the laptop only. I am glad that you are one of them, but you must know that this recovery image is designed for the installation of operating system simple and not complicated. There is no possibility to install clean Vista using this recovery media.

  Another way person doesn't force you to use each of them. All the unnecessary stuff, you can remove the system. Believe me I do the same thing. Your needs, you can optimize the operating system.

  Bye and good luck!

• For Satellite L40, Windows Vista recovery disk

  Hi, can someone tell me how buy/download drive recovery Internet, better if, through toshiba.co.uk.

  ... or any who has formatted a L40 series without a recovery disk, how to get a copy real victory?

  Thank you

  William Tonza

  You can order under https://backupmedia.toshiba.eu/landing.aspx
  Check it out.

• Re: Replacement of the Satellite A135 wireless module

  Well all the time, I have a Toshiba Satellite A135-S4487.
  The problem here is, put the MAC OS X and windows 7, but for module of Macau Wi - Fi for Intel 3945 chipset drivers are no where to turn off the system.
  And the crux of the matter, is the Wi - Fi module with a Broadcoma BCM4311 driver chipset saw both systems, but the vklyuchaetsya Wai - Fai not through the switch is included without emotion. By clicking on fuktion + F8 doesn't do nothing, tried hard in second place with native whist drive did not help.

  Then this device the parent to set windows and MACS normally seen, and it worked correctly?
  How can I re - ask the BIOS see it as their own?

  Or how can I do to make this work?

  All Wi - Fi features are guaranteed on the operating systems supported only.
  As I see you are using two unsupported operating systems. Support Win7 will begin in a few months.

• Toshiba Satellite A135 laptop: 0xc000000f - Windows Vista Boot error - > recovery disk does not work, can't get the PC to boot.

  I have read all the info out there and tried many things including using the provided by Toshiba, Vista recovery disks

  I can't go down the screen of boot error, although no matter what I try.

  Is my drive into two partitions, and I am ready to sacrifice one of them if necessary to get the computer to boot.

  Is there a way I can enter directly into the computer and reinstall windows?

  I'm not a pro, then simple instructions are the best.

  THX

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What are the troubleshooting steps you tried to solve the problem?

  3. the problem occurs in safe mode?

  4. don't you try to do the Startup Repair?

  I suggest you try the steps from the link below and check if it helps.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows: http://support.microsoft.com/kb/927392

  Hope this information is useful.

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• Error message using on Satellite A135 recovery CD/DVDs

  Hi Forum:

  I try to restore the factory default in my laptop Satellite A135 where to finish the process I have received an Error Message and press ok and disable my laptop automaticlly.

  NOTE: Only use the CD/DVD, my laptop does not have the partition hiding any help?

  Hello

  I googled a bit for this error message and it seems that the error would have apparently due to HARD drive failure.
  So in your case, it would be desirable to replace the HARD drive and to verify if the error persists using a new HARD drive.

  Best regards

• Satellite A135 - problem with the CD/DVD burner

  Hey guys,.
  A few days ago as nearly a week ago I had burned an audio CD for myself and it worked perfectly. Today when I tried to burn an image on my DVD, disaster. I use two software. IMGBURN & NERO. Unfortunately both failed me. What is happening is that the burning process starts normally, it shows that the buffering and burning taking place as well as caching of files. "Finally, it shows the burning process has been a success, but when it comes to verification, the drive appears saying: data verification failed - too many errors (Nero) and for IMGBURN it says ' they layouts do not match. When I reinsert the DVD, it shows that it is completely empty. Although both claim that the fire was successful. Later, I tried to burn a data dvd, still no luck, engraving, he shows successfully but verification fails and reinsert is empty.

  My laptop is: Satellite A135
  CD/DVDROM: TSST CORP TS-L632D ATA
  OS: Windows

  the default windows was vista when I bought it.

  Hello

  If you can't burn DVDs, then you should check first if it is a software problem based question or related equipment.

  I've been reading about the reader of CD/DVD burning questions and as many times the registry has been corrupted.
  Means that you was able to burn the DVD after you remove the upper and lower filters in the registry. Google for it and you'll find many pages.

  Is there a problem of CD/DVD drive, then you should find a good update on the page of European Toshiba driver in your laptop. If there is no update firmware, then it means that this firmware is ok and it s not necessary to date.

  Last but not Lea not all CD/DVD drive are compatible with all drives (CD and DVD).
  Why? Because the different CD and DVD manufacturers produce own using different standards. In this case, it may be possible that not all discs will be properly treated

  I had the same problem but might solve this problem by using TDK R CD or DVD