Error in the project in an attempt to FilePicker code...

Similar Questions

• explamation point error in the Project Explorer near cRIO

  Thanks to anyone who can help me...

  I created a project for my cRIO 9074 with several modules and is works well on my desktop PC...
  However, I have to use, instead of the desktop PC computer, a laptop (two computers with Windows 7 platform) which has installed all the necessary software, which is also on the desktop.
  The project that I transferred to the laptop has an exclamation point next to the name of the cRIO and he says: 'for the selected item plug-in is not installed on your system or the plug-in has an expired license. Please contact National Instruments. »
  On both computers: desktop and laptop PC the cRIO is fully seen by MAX.
  We have all the licenses as University, and anyway the same software has been installed on two computers (both licenses).

  Thanks for any information that can help me,

  Hello

  This exclamation point indicates that part of the software is not installed or that the software is not enabled on/for that PC.

  Is it possible to posta screenshot where exactly the exclamation point appears in the project?
  This will allow me to get more certainty about what is causing the problem.

  You can also check in the License Manager OR (start > programs > National Instruments > NI License Manager) if the LabVIEW Real-time and other modules are enabled correctly there?
  The square next to the software modules must be green in this case.
  If you have some orange or red squares, it could indicate that some software was not enabled.
  A screenshot of the window would be useful for debugging more the issue.

  To check if all necessary software and drivers are installed, I'd need a MAX Report from two PCs:
  -You can create it from MAX by selecting file > create a report
  ' - In the next window, you can select 'My system' and Support '.

  Can you do this for both pc and view zip files, so that I can compare the versions of software installed?

• Download error. The downloaded file has no verification. Code of error = 0x80040507__Google Chrome Installer

  Hello. I have a problem that I recently received these messages on computer blue screen comes and goes... (bsofd) when im using the internet only. Told me to stop using ie 8 and google chrome but when I tried to download it it was the message that I received... "Download error. The downloaded file has no verification. error code = 0 x 80040507 ". I have windows xp... SP3. my hardware is dual cpu, 2 GB ram, 1 TB hard drive and 512 graphics card. Please help me

  Hi Arvind,

  You try to run chkdsk on the machine and check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error in the project

  Hi forum,

  I have a problem with Wi - Fi and basically my project is no more work. I build my application with a vi front where I selcect the input channels, this works very well.

  But as soon I open the entire project with the front vi I can't select more than any channel / scale task or costume and the vi is no longer running, that soon I press the stop button the application ends with the attached error message.

  I tried to creat a new vi then create a project of the vi and the same problem.

  Help, please

  best Martin

  
  

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• ERR-9131 error in the body of PLSQL function for default code point, the point =

  Hi all
  
  
  I am filling a field element of text in two different ways, but on the same page:
  
  1 - the page is called to change the values inside-> value of the element comes from field of database
  
  2 - the page is called to insert new values-> value of the element comes from a calculated function that returns a default value
  
  Point features:
  
  Source->
  
  always replace any existing value in session state
  
  database column
  
  -> Default
  
  -----------------------------------------------------------------------------------------------------------------------------
  default value
  ------------------------------------------------------------------------------------------------------------------------------
  DECLARE
  NUMBER OF THE LINHA;
  gene number;
  i_emp varchar2 (32000);
  v_sql2 varchar2 (32000);
  BEGIN
  i_emp: =: P62_EMP_COD;
  
  IF: P62_RDD_LIN IS NULL THEN
  LINHA: = 1;
  ON THE OTHER
  LINHA: =: P62_RDD_LIN;
  END IF;
  
  v_sql2: =' select '. i_emp |'. Grh_1_utils. GRHFU_RUB_DEFAULT ('|: P62_ENT_COD |', 'R' ' |: P62_REM_COD |', 1, 1000000, to_date null, "D", ("' |: P62_DAT_INI |")) (', "DD/MM/YYYY"),' | LINHA |') the double ';
  
  EXECUTE IMMEDIATE v_sql2 INTO gene;
  COMMIT;
  
  return deciphered;
  end;
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  default value - body of the PL/SQL function
  
  
  
  
  The error I get is:
  
  
  
  ORA-00936: lack of expression
  
  ERR-9131 error in PLSQL function for default code point body, item = ITEM_TO_POPULATE
  
  
  
  Something is wrong with my function or is a different, better way to do this?
  
  
  Cordially Pedro.

  Hello

  You can do some tests?
  (1) try to make this code first (to make sure that the P62_EMP_COD is not null when running):

  DECLARE
  LINHA NUMBER;
  defeito number;
  i_emp varchar2(32000);
  v_sql2 varchar2(32000);
  BEGIN
  i_emp := :P62_EMP_COD;
  
  IF :P62_RDD_LIN IS NULL THEN
  LINHA:=1;
  ELSE
  LINHA := :P62_RDD_LIN;
  END IF;
  
  v_sql2:='select '||i_emp||'.Grh_1_utils.GRHFU_RUB_DEFAULT('||:P62_ENT_COD||',''R'','||:P62_REM_COD||', 1 , 1000000,''D'',null,to_date('''||:P62_DAT_INI||''',''DD/MM/YYYY''),'||LINHA||') from dual';
  
  EXECUTE IMMEDIATE v_sql2 INTO defeito;
  COMMIT;
  
  return defeito;
  end;
  

  (2) then you can try to change your source, by changing 'replacement always of value that exists in the session state' "only when null.

  (3) enter your variable dynamic SQL code and check it out:

  DECLARE
  LINHA NUMBER;
  defeito number;
  i_emp varchar2(32000);
  v_sql2 varchar2(32000);
  BEGIN
  i_emp := :P62_EMP_COD;
  
  IF :P62_RDD_LIN IS NULL THEN
  LINHA:=1;
  ELSE
  LINHA := :P62_RDD_LIN;
  END IF;
  
  v_sql2:='select '||i_emp||'.Grh_1_utils.GRHFU_RUB_DEFAULT('||:P62_ENT_COD||',''R'','||:P62_REM_COD||', 1 , 1000000,''D'',null,to_date('''||:P62_DAT_INI||''',''DD/MM/YYYY''),'||LINHA||') from dual';
  return v_sql2;
  EXECUTE IMMEDIATE v_sql2 INTO defeito;
  COMMIT;
  
  return defeito;
  end;
  

  (4) prevent your run immediate code of SQL Injections using the link:

  DECLARE
  LINHA NUMBER;
  defeito number;
  i_emp varchar2(32000);
  v_sql2 varchar2(32000);
  BEGIN
  i_emp := :P62_EMP_COD;
  
  IF :P62_RDD_LIN IS NULL THEN
  LINHA:=1;
  ELSE
  LINHA := :P62_RDD_LIN;
  END IF;
  
  v_sql2:='select '||i_emp||'.Grh_1_utils.GRHFU_RUB_DEFAULT(:1,''R'',:2, 1 , 1000000,''D'',null,to_date(:3,''DD/MM/YYYY''),:4) from dual';
  
  EXECUTE IMMEDIATE v_sql2 INTO defeito USING :P62_ENT_COD, :P62_REM_COD, :P62_DAT_INI, LINHA;
  COMMIT;
  
  return defeito;
  end;
  

  Best regards, Kostya Proskudin

• "The project seems damaged, it cannot be opened.

  I created a project in Premiere Pro CS6 creative cloud but when I try and open it in a single-app subscription version and also the copy we have as part of the creative suite, I get the following error:

  "The project seems damaged, it cannot be opened.

  This is due to the differences in the versions or is damaged in fact file?

  It opens correctly on the computer that is running the license creative cloud without error so I don't think the file is actually damaged but we cannot access it from other machines.

  Well, any help would be apporeciated.

  Thank you

  Welcome to the forums.

  The error massaage indicates this project file is either damage or damaged.

  If the project file is very good project file can run on simple subscription App and subscription Volume License.

  Just make sure that you open project created in first pro CS6 not project created in CC pro first.

  Project created first CC pro will not open ion first pro CS6 while vice versa is possible.

  Concerning

  Dominique singh

• Transfer to new PC: the project could not be loaded, it can be damaged or contain obsolete items

  The problem

  I transferred a large and operation project Premiere Pro for a more powerful PC, but I am unable to execute it, stopped by the error message "the project could not be loaded, it may be damaged or contain obsolete items.

  Facts

  The new PC has a 6-Core and a different hard disk configuration, but both the operating system is Windows 7 and the two hosts to update Premiere Pro CS6 (as part of Adobe Production Premium). PCs are networked and Premiere Pro on the old PC can properly load and run the project file located on the new PC, proving that the transferred file is not damaged. In addition, previous versions of the same project produces the same error message when it is run on the new PC except, very oddly, for earlier versions recorded the or before June 28, 2011, as the project was only a fifth of its current size. These versions are loading correctly. The contemporaneous notes show that the editing that day was simple timeline editing, IE not after effects, etc. (that came later), and the project has worked well then and since.

  I is not a damaged project file and I don't know what "to the outdated elements.

  Help

  Any help to solve this problem would be appreciated.

  Hi lemoncart,

  The AE in first pro comps are connected by a dynamic link. So, it can happen if you take the project in another machine that the link is broken and Premiere pro was not able to communicate through these AE compositions.

  Kind regards

  Vinay

• Error on the page shows up after I connected

  When I first log in, you'll see a screen with:

  Line: 30

  Char: 3

  : Error loading the DLL (what is DLL?)

  Code: 0

  URL: file:///C:/Program%20Files/Dell%20% Support

  20Center/sscommon/Inc/ss_shellinclude.js

  Hello

  ·        Since when you get this error message?

  ·        Do you get the complete error message or there is any other error messages as well?

  To answer the question, what is a DLL file, you can follow the article given, which will give you an overview what's this file.

  What is a DLL?

  http://support.Microsoft.com/kb/815065

  You can also check in the event viewer, as to what is causing the error. To open the Event Viewer follow the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  To get rid of the error message, you can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The following files referenced in PeopleFinder.alx cod is / are missing in the publishable bundle: 5.0.0/peoplefinder.cod

  I get the error message "the following files referenced in PeopleFinder.alx cod is / are missing in the publishable bundle: 5.0.0/peoplefinder.cod" while trying to add or update an application. It is a zip file. I also tried to rename the folder. Please help

  Is the directory structure where the COD files (regarding the ALX file) corresponds to what is listed in the ALX file?

• a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as files cpbackup

  Hello

  We have Adobe Captivate installed 8.0.0.145 Windows 7 x 64 v.

  Activate Adobe crashes with the following error: a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as cpbackup files.

  I uninstalled Adobe Acptivate, rebooted the PC and reinstalled activate Adobe - unresolved error.

  I have cleared the cache under settings, clear the cache - unresolved error.

  Please notify.

  Kind regards

  George

  
  

  The update should be available to help, updated. It is available since October 2014.

  Being administrator is not the same thing as Captivate running as an administrator that must be put in place in the menu right click on the shortcut that launches Captivate. You have restricted functionality if this is not done.

  I told you how to clear preferences, with the file Utils. First close Captivate, when you restart CP will create a new preferences folder.

  

  If you have a lot of customization that you will lose when the erasing of the preferences. To keep them, have a look at my blog:

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  Layouts folder is located in the public Documents. It is a copy of the original folder in the gallery. Same thing with the Interactions.

  

• Error message: the preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the original preset, as

  Hi all

  I can't open a project PP without this error message that appears:

  "The preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the preset original, exit the application without saving the project, reinstall all third-party components that are needed, and reopen the project'.»

  What I had been doing before that to happen was a PP project using sequences ProRes for editing and editing multicamera. Several cameras didn't work very well and after a few attempts of difficulty that I gave up and finished the work of cutting 3 layers of video instead. SOUL refused to make the finished three lasting more than 1 hr sequences so rendered video sequences PP. finals

  I tried to remove the plists for SOUL, PP and QT repair disk permissions and restarted, but there was no improvement.

  Customer is satisfied for now, but will want to return on this work to a later date so decided to uninstall and reinstall SOUL and PP in the hope that the two would be willing to work properly when needed again. SOUL works very well in conjunction with another PP project, but now I can't open the PP project in question without the above error message appears.

  After searching on the net, it seems that the problem may be caused by ProRes but I could not find a definitive solution to the problem. Does anyone know either:

  1. How do I solve this problem?

  2. If I chose the "modified by using a custom sequence parameter", can I be sure that my footage will look the same, even if they do not use ProRes? The final format of the deliverable will be mp4 so as long as the overall appearance does not change so I can afford a change in the edit codec. It's just that with three sequences of more than an hour long, I don't want working days to be ruined.

  Other older PP projects of mine open and work properly.

  First CC 8.2.0 Pro

  Media encode CC 8.2.0.54

  10.10.2 OSX

  Any help would be greatly appreciated.

  Duncan.

  Web chat Adobe find a solution.

  Open the PP. project

  Export your project or the sequence in Final Cut Pro XML form.

  Set up a new project PP.

  Import Final Cut Pro XML file.

  This will take you to the top race.

  Since getting back to this publishing project, I found that some things will be lost or change using XML:

  You will lose the position key framing, black video clips, dissolve fx, audio levels, dynamic audio fx, the possibility to open a multi camera clip and change the display of the camera.

  You keep the cut points, crop fx.

  Not perfect but only took a few hours to save 3 working days.

• Error of codec, need images/newspaper notes to the project.

  Right so I have CS6 and that you have successfully updated my first to 6.0.3. I get the error 'sequence a lack of codecs' which is the infestation CS6 users (I've been on a lot of sites/forums through all the patches). I opened the program from Adobe and updated to implement everything. I uninstalled and reinstalled and made the own system as suggested on the Adobe help page several times. I tried to do new projects and then tried re-opening of mine (apparently it has worked for some people). I even made a copy of the project and tried to change the lines of code for the codecs in the sequence of the i-Frame MPEG in AVI. I rebooted my system after each attempt. I can not even open the project.

  I can however make a new project and import ALL of the images. This seems strange to me, but hey, it works. Here's my problem. My producer (the project is a pilot to see the TV) large images/journal notes/color left images encoded for me in the initial project (marking takes good and bad, between b-roll interviews, etc.) I want to be able to access all of these notes, she did this on his machine and I will now change my desktop at home. Is there anyway that I can get the images in my new project to comply with all of these notes?

  I am close to the end of my rope here and time runs out, I'm on a very tight deadline and work as full time another edition of work during the day. Any help on fixing was created so that I can open the original project or move the notes of sequences from one project to the other would be VERY APPRECIATED. Thank you for your time and your help.

  You get properly active PP.

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• The initialization of the project of error

  Whenever I open a sample project, I get this error of initialization (screenshot attached). It could be the cause, or how can I solve this problem? Thanks in advance!

  It's really weird.   It seems that your directory where this example had permissions writable for data sets could be written here that chagned to authorization and MWO is let you know there is no write permission.    I see two options.

  1. go in this directory where this example and remove all folders of data sets that see you.  Avoid all in the expedition of AWRDE examples folder.

  2. save the project in another place where you do not have write access and then it should work.